{"title":"Rago Fabrication","description":null,"products":[{"product_id":"rago-fabrication-ineos-grenadier-rear-door-window-molle-panels","title":"Rago Fabrication INEOS Grenadier Rear Door Window MOLLE Panels","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Rear Door Window MOLLE Panels fit 2023–2026 INEOS Grenadier rear doors, mounting around the window pockets to add MOLLE-compatible gear storage without consuming cargo floor space. Made from steel with a 2-stage hammer black powder coat finish, each panel is designed and tested in the USA and is available separately for the driver side and passenger side rear doors.\u003c\/p\u003e\n\n\u003ch2\u003eStorage Where You Need It\u003c\/h2\u003e\n\u003cp\u003ePositioning gear storage on the rear door windows keeps supplies within arm's reach when the doors are open at a trailhead or campsite, rather than buried under cargo in the load floor. The MOLLE webbing accepts a wide range of compatible pouches, mounts, and organizers, so the panels can be configured to carry first-aid kits, recovery tools, hydration, or communications gear depending on how a rig is built out.\u003c\/p\u003e\n\n\u003ch2\u003eFactory-Like Fit, Rattle-Free on the Trail\u003c\/h2\u003e\n\u003cp\u003eEach panel is shaped to sit flush in the rear door window pocket, following the contour of the opening for a clean, integrated appearance. The mounting method secures the panel around the window frame rather than relying on adhesive or friction, which keeps the panel stable and quiet on rough terrain where loose hardware becomes a distraction.\u003c\/p\u003e\n\n\u003ch2\u003eGlass Protection as a Secondary Function\u003c\/h2\u003e\n\u003cp\u003eBeyond storage, the steel panel sits between the rear door glass and the cargo area, acting as a barrier against shifting loads that could crack or scratch the window. On longer trips where gear tends to migrate, that layer of protection reduces the risk of an expensive repair on a remote trail.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory-like window pocket fit:\u003c\/strong\u003e shaped to follow the rear door window pocket contour for a flush, integrated look\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMOLLE webbing:\u003c\/strong\u003e accepts MOLLE-compatible pouches, mounts, and organizers for configurable gear storage\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRattle-free mounting:\u003c\/strong\u003e secures around the window frame for stability on rough terrain\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGlass barrier:\u003c\/strong\u003e steel panel protects rear door glass from shifting cargo\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2-stage hammer black powder coat:\u003c\/strong\u003e durable finish over steel construction\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eDesigned and tested in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDriver Side\u003c\/th\u003e\n      \u003cth\u003ePassenger Side\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd colspan=\"2\"\u003e2023–2026 INEOS Grenadier (rear doors)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd colspan=\"2\"\u003eSteel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd colspan=\"2\"\u003e2-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e5 lb\u003c\/td\u003e\n      \u003ctd\u003e10 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC6511901NA\u003c\/td\u003e\n      \u003ctd\u003eAC6512001NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese panels suit 2023–2026 INEOS Grenadier owners who want to add MOLLE-compatible storage to their rear doors without sacrificing cargo floor space, and who want a layer of protection between shifting gear and the rear door glass.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese panels do not fit any vehicle other than the 2023–2026 INEOS Grenadier. Each panel covers one rear door window; driver and passenger sides are sold separately. MOLLE-compatible accessories, including Quick Fist Mounts (R0000MSPQUICK), are not included and are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich years and vehicles do these panels fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Rear Door Window MOLLE Panels are designed specifically for 2023–2026 INEOS Grenadier rear doors. They are not compatible with other makes or models.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDo I need to buy the driver and passenger panels together?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe driver side and passenger side panels are sold separately, so a Grenadier owner can purchase one or both depending on their build. Each variant is listed individually by side.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat MOLLE accessories are compatible with these panels?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Rear Door Window MOLLE Panels accept standard MOLLE-compatible pouches, mounts, and organizers. Rago's own Quick Fist Mounts (SKU R0000MSPQUICK) are a compatible option and are sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eAre any accessories or mounting hardware included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe listing covers the MOLLE panel itself. MOLLE-compatible accessories such as Quick Fist Mounts are sold separately. Refer to the install guide for hardware details specific to each side.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow do the panels mount, and will they rattle on rough trails?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication panels mount around the rear door window frame rather than using adhesive or friction fit. This mounting approach is designed to keep the panel stable and quiet on rough terrain.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDo the panels protect the rear door glass?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The steel panel sits between the rear door glass and the cargo area, acting as a barrier against shifting loads that could scratch or crack the window during travel.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Driver","offer_id":50621639589958,"sku":"AC6511901NA","price":93.99,"currency_code":"USD","in_stock":true},{"title":"Passenger","offer_id":50621639622726,"sku":"AC6512001NA","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/ineos-grenadier-rear-door-molle-panel-driver-sq.jpg?v=1791935364"},{"product_id":"rago-fabrication-universal-molle-panel-rotopax-adapter-kit","title":"Rago Fabrication Universal MOLLE Panel RotopaX Adapter Kit","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Universal MOLLE Panel RotopaX Adapter Kit is a 0.120-inch mild steel reinforced backing plate that distributes the weight of a filled RotopaX tank across multiple attachment points on any Rago Fabrication MOLLE panel or shelf system. It pairs with the Rago RotopaX Molle Mount (Part# AC9905301NA, sold separately) and installs without cutting in approximately five minutes.\u003c\/p\u003e\n\n\u003ch2\u003eReinforced Support Where Filled Tanks Need It\u003c\/h2\u003e\n\u003cp\u003eA filled RotopaX tank carrying water or fuel puts meaningful concentrated load on MOLLE webbing attachment points, especially over rough terrain where vibration and lateral forces compound the stress. The adapter adds a rigid steel backing plate behind the mount, spreading that load across a wider area of the shelf or panel structure. The result is a more stable, secure connection that holds position on the trail rather than working loose over time.\u003c\/p\u003e\n\n\u003ch2\u003eNo Permanent Modification Required\u003c\/h2\u003e\n\u003cp\u003eThe adapter installs in approximately five minutes with no cutting required, leaving the underlying Rago panel or shelf unmodified. The setup can be repositioned or removed without any lasting change to the panel, which is useful when cargo configurations change between trips or when the panel moves to a different vehicle.\u003c\/p\u003e\n\n\u003ch2\u003eLow Profile, Stays Out of the Way\u003c\/h2\u003e\n\u003cp\u003eThe adapter's low profile keeps it from adding unnecessary bulk or interfering with adjacent gear on the panel. Once installed, it sits behind the RotopaX Molle Mount and does not add a prominent physical presence to the storage layout.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReinforced backing plate:\u003c\/strong\u003e distributes the load of a filled RotopaX tank across multiple attachment points on Rago shelf systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e0.120\" mild steel construction:\u003c\/strong\u003e hammer black powder coat finish\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal Rago compatibility:\u003c\/strong\u003e integrates with any Rago Fabrication MOLLE panel or shelf system\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo-cut installation:\u003c\/strong\u003e installs in approximately five minutes with no cutting required\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eMade in USA\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold individually:\u003c\/strong\u003e one adapter per package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003e0.120\" Mild Steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Systems\u003c\/td\u003e\n      \u003ctd\u003eAny Rago Fabrication MOLLE Panel or Shelf System\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRequired Accessory\u003c\/td\u003e\n      \u003ctd\u003eRotopaX Molle Mount, Part# AC9905301NA (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSold\u003c\/td\u003e\n      \u003ctd\u003eIndividually\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOrigin\u003c\/td\u003e\n      \u003ctd\u003eMade in USA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC9912401NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis adapter suits overlanders and off-road drivers who already run a Rago Fabrication MOLLE panel or shelf system and want to mount a filled RotopaX water or fuel tank securely, with reinforced backing support to handle the added weight on rough terrain.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe RotopaX Molle Mount (Part# AC9905301NA) is required for this adapter to function and is sold separately; it is not included in this kit. This adapter is designed specifically for Rago Fabrication panel and shelf systems and is not intended for use with other brands' MOLLE panels.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this adapter work with all Rago Fabrication MOLLE panels and shelf systems?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Universal MOLLE Panel RotopaX Adapter Kit is designed to integrate with any Rago Fabrication MOLLE panel or shelf system. This adapter kit is designed for Rago Fabrication MOLLE panels and shelf systems only.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs the RotopaX Molle Mount included with this adapter kit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe RotopaX Molle Mount (Part# AC9905301NA) is required for this adapter to function but is sold separately and is not included in this kit. Both pieces are needed to mount a filled RotopaX tank to a Rago Fabrication panel or shelf.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes installation require cutting or drilling into the panel?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo cutting or drilling is required. The Rago Fabrication RotopaX Adapter Kit installs in approximately five minutes and leaves the underlying MOLLE panel or shelf unmodified, so it can be repositioned or removed without permanent changes to the panel.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the adapter made from?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe adapter is constructed from 0.120-inch mild steel with a hammer black powder coat finish and is manufactured in the USA.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621640474694,"sku":"AC9912401NA","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/AC9912401NA-universal-rotopax-shelf-mount-adapter-kit-sq.jpg?v=1791935408"},{"product_id":"rago-fabrication-2023-2026-ineos-grenadier-molle-panel-shelves","title":"Rago Fabrication 2023-2026 INEOS Grenadier MOLLE Panel Shelves","description":"\u003cp class=\"product-lead\"\u003eRago Fabrication's MOLLE Panel Shelves add horizontal cargo storage to the 2023–2026 INEOS Grenadier by mounting directly to Rago's Rear Window MOLLE Panels. Constructed from steel with a 2-stage hammer black powder coat finish, each shelf provides MOLLE-compatible surfaces on both the top and bottom face, so gear can be secured above and below the platform. Two configurations are available: Standard, which positions across the mid and lower zones of the rear window panels, and High-Mount, which positions toward the top of the panels.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt Around the Rago Panel System\u003c\/h2\u003e\n\u003cp\u003eThe MOLLE Panel Shelves attach to Rago's Rear Window MOLLE Panels using adjustable mounting positions, letting you set shelf height to match your specific gear layout. Because the shelves integrate with the panel's existing MOLLE grid rather than requiring separate wall anchors or drilling, repositioning the shelf is a matter of choosing a different mounting point along the panel, which is useful when your cargo needs change between trips.\u003c\/p\u003e\n\n\u003ch2\u003eMOLLE-Compatible on Both Surfaces\u003c\/h2\u003e\n\u003cp\u003eThe Rago MOLLE Panel Shelf carries a MOLLE grid on both its top and bottom face. MOLLE-compatible pouches, straps, or accessories can be run on the surface above the shelf and on the underside simultaneously, effectively doubling the usable attachment area within the same footprint. Bags, blankets, recovery gear, and first-aid kits can each claim a dedicated spot without competing for floor space in the Grenadier's rear cargo area.\u003c\/p\u003e\n\n\u003ch2\u003eSteel Construction with Powder Coat Finish\u003c\/h2\u003e\n\u003cp\u003eThe shelves are fabricated from steel and finished with a 2-stage hammer black powder coat. The two-stage process builds up more coating thickness than a single-stage application, adding resistance to chipping and corrosion in the wet, muddy, and dusty environments common to overlanding and off-road use. The hammer texture also reduces the visibility of minor surface scuffs that accumulate over time.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect panel integration:\u003c\/strong\u003e mounts to Rago Rear Window MOLLE Panels with adjustable mounting positions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual MOLLE surfaces:\u003c\/strong\u003e MOLLE-compatible grid on both the top and bottom face of the shelf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo configurations:\u003c\/strong\u003e Standard (mid and lower panel zones) and High-Mount (upper panel zone), usable individually or together\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSteel construction:\u003c\/strong\u003e durable steel build with 2-stage hammer black powder coat finish\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExpandable:\u003c\/strong\u003e compatible with Rago MOLLE accessories, including Quick Fist Mounts (sold separately, SKU R0000MSPQUICK)\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eDesigned and tested in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eStandard\u003c\/th\u003e\n      \u003cth\u003eHigh-Mount\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eSteel\u003c\/td\u003e\n      \u003ctd\u003eSteel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003e2-stage hammer black powder coat\u003c\/td\u003e\n      \u003ctd\u003e2-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e58 lb\u003c\/td\u003e\n      \u003ctd\u003e41 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMount position\u003c\/td\u003e\n      \u003ctd\u003eMid and lower zones of rear window MOLLE panels\u003c\/td\u003e\n      \u003ctd\u003eUpper zone of rear window MOLLE panels\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRequired mounting surface\u003c\/td\u003e\n      \u003ctd colspan=\"2\"\u003eRago Rear Window MOLLE Panels (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle fitment\u003c\/td\u003e\n      \u003ctd colspan=\"2\"\u003e2023–2026 INEOS Grenadier\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOrigin\u003c\/td\u003e\n      \u003ctd colspan=\"2\"\u003eDesigned and tested in the USA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC6503001NA\u003c\/td\u003e\n      \u003ctd\u003eAC6512101NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese shelves suit 2023–2026 INEOS Grenadier owners who have installed or are planning to install Rago's Rear Window MOLLE Panels and want to add a horizontal shelf platform to their rear cargo area. Both configurations work for overlanding builds, camping setups, and daily utility use where organized, accessible cargo storage matters.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe MOLLE Panel Shelves are not compatible with any vehicle other than the 2023–2026 INEOS Grenadier, and they cannot be installed without Rago's Rear Window MOLLE Panels as the mounting surface. Quick Fist Mounts and other MOLLE accessories are sold separately and are not included.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo these shelves require Rago's Rear Window MOLLE Panels to install?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago MOLLE Panel Shelves for the INEOS Grenadier mount directly to Rago's Rear Window MOLLE Panels, which serve as the required mounting surface. The shelves cannot be installed without those panels already in place; the Rear Window MOLLE Panels are sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between the Standard and High-Mount configurations?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Standard MOLLE Panel Shelf mounts across the mid and lower zones of the rear window MOLLE panels, while the High-Mount configuration positions the shelf toward the top of the panels. Both configurations use adjustable mounting positions, and both can be run at the same time to maximize storage across the full height of the panel.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan I attach gear both above and below the shelf?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago MOLLE Panel Shelf features a MOLLE-compatible grid on both its top and bottom face, so MOLLE pouches, straps, and accessories can be attached to either surface simultaneously. This lets you use the space above the shelf platform and the underside at the same time for organized gear storage in the Grenadier's rear cargo area.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eAre Quick Fist Mounts or other MOLLE accessories included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eQuick Fist Mounts (SKU R0000MSPQUICK) and other Rago MOLLE accessories are not included with the MOLLE Panel Shelves and are sold separately. The shelves are compatible with the full range of Rago MOLLE accessories, which can be added to expand storage options on the top and bottom surfaces of the shelf.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the shelf made of and how is it finished?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago MOLLE Panel Shelves are fabricated from steel and finished with a 2-stage hammer black powder coat. The two-stage powder coat builds up coating thickness for added chip and corrosion resistance, and the hammer texture helps conceal minor surface wear over time.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"High-Mount","offer_id":50621645029446,"sku":"AC6512101NA","price":407.99,"currency_code":"USD","in_stock":true},{"title":"Standard","offer_id":50621645062214,"sku":"AC6503001NA","price":551.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/ineos-grenadier-molle-panel-shelf-high-mount-sq.jpg?v=1791935602"},{"product_id":"rago-fabrication-ineos-grenadier-and-quartermaster-ditch-light-bracket","title":"Rago Fabrication INEOS Grenadier and Quartermaster Ditch Light Brackets","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Ditch Light Brackets are a pair of steel A-pillar mounts designed specifically for the 2023–2026 INEOS Grenadier and Quartermaster, each capable of holding one 6-inch light to illuminate the edges of the trail ahead. The brackets position in front of the side mirrors without entering the driver's or passenger's sightlines, and their low-profile OE+ fitment preserves the Grenadier's distinctive body lines. Both the standard Grenadier and the long-wheelbase Quartermaster are supported.\u003c\/p\u003e\n\n\u003ch2\u003eSide Lighting That Stays Out of Your Sightlines\u003c\/h2\u003e\n\u003cp\u003eDitch lights are only useful if they don't create new blind spots. The Rago Fabrication brackets place each light directly in front of the side mirrors, keeping the illuminated zone wide without cutting into the driver's or passenger's field of view. That positioning keeps the illuminated zone wide, washing the trail edges and revealing drop-offs or large obstacles, without placing any obstruction in the mirror line.\u003c\/p\u003e\n\n\u003ch2\u003eIntegrated Wire Management for a Tidy Build\u003c\/h2\u003e\n\u003cp\u003eRouting wiring through an A-pillar bracket is often an afterthought that results in exposed runs and zip-tie fixes. These brackets include integrated wire management channels so the wiring path is built into the mount itself. The result is a cleaner finished install with no loose wire exposed to trail debris or weather, and a more professional appearance that matches the Grenadier's factory fit-and-finish.\u003c\/p\u003e\n\n\u003ch2\u003eAn Expandable Platform for a Pair of Lights Per Side\u003c\/h2\u003e\n\u003cp\u003eThe brackets ship ready to run one 6-inch light per side. For builds that call for two lights per side, Rago's separate Extension Brackets (RACCDITEXT) attach to these mounts to add a second light position on each A-pillar. A HAM Antenna Extension Bracket (R0000ACCHAMEXT) is also available as a separate add-on for operators who want to co-locate a HAM antenna at the same mounting point. Both accessories are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePer-side light capacity:\u003c\/strong\u003e mounts up to one 6-inch light on each A-pillar\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMirror-forward placement:\u003c\/strong\u003e positions in front of side mirrors without impeding driver or passenger visibility\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow-profile OE+ fitment:\u003c\/strong\u003e preserves the Grenadier's factory styling\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated wire management:\u003c\/strong\u003e built-in routing channels for a clean wiring path\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExpandable:\u003c\/strong\u003e compatible with Rago Extension Brackets (RACCDITEXT) for dual lights per side and HAM Antenna Extension Bracket (R0000ACCHAMEXT), both sold separately\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eDesigned and tested in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2023–2026 INEOS Grenadier and Quartermaster\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eSteel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003e2-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLight Capacity\u003c\/td\u003e\n      \u003ctd\u003eUp to one 6-inch light per bracket\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eQuantity\u003c\/td\u003e\n      \u003ctd\u003eSold as a pair (2 brackets)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eDrilling and Riv-Nut installation required\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC6507701NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese brackets suit 2023–2026 INEOS Grenadier and Quartermaster owners who want dedicated A-pillar ditch lighting for trail driving at low light, and who are comfortable with a drilling and Riv-Nut installation or plan to have it done professionally.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese brackets do not fit any vehicle outside the 2023–2026 INEOS Grenadier and Quartermaster lineup. Lights are not included and must be sourced separately. Running two lights per side requires the separate Rago Extension Brackets (RACCDITEXT), which are not included.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat size lights do these brackets accept?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach Rago Fabrication Ditch Light Bracket for the INEOS Grenadier and Quartermaster is designed to mount up to one 6-inch light per side. Lights are not included with the brackets and must be purchased separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDo the brackets block the side mirrors?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Rago Fabrication brackets are positioned in front of the side mirrors and use a low-profile design specifically to avoid entering the driver's or passenger's sightlines, so mirror visibility is not impaired.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs drilling required to install these brackets?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. Installation of the Rago Fabrication Ditch Light Brackets on the INEOS Grenadier and Quartermaster requires drilling and Riv-Nut installation. Owners who are not comfortable with that process should have the brackets installed by a qualified shop.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan I run two lights per side with these brackets?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach bracket holds one 6-inch light per side as shipped. To run a pair of lights on each side, the Rago Extension Brackets (RACCDITEXT) can be added to these mounts. The Extension Brackets are sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDo these brackets work with a HAM antenna?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes, with an additional accessory. The Rago HAM Antenna Extension Bracket (R0000ACCHAMEXT) is compatible with these ditch light brackets and allows a HAM antenna to be co-located at the same A-pillar mount. The antenna extension bracket is sold separately.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621650665542,"sku":"AC6507701NA","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2023-2026-ineos-grenadier-quartermaster-ditch-light-brackets-sq.jpg?v=1791935743"},{"product_id":"rago-fabrication-ineos-grenadier-console-molle-panels","title":"Rago Fabrication INEOS Grenadier Console MOLLE Panels","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Center Console MOLLE Panels are steel-construction storage panels designed to contour precisely to the factory center console of 2023–2026 INEOS Grenadier and Quartermaster vehicles, putting radios, phones, GPS devices, knives, and pouches within arm's reach while off-road. The panels ship in a hammer black powder coat finish and are designed and tested in the USA. One panel set covers both the Grenadier and the Quartermaster body style.\u003c\/p\u003e\n\n\u003ch2\u003eOrganized Gear, Exactly Where You Need It\u003c\/h2\u003e\n\u003cp\u003eOff-road driving demands that critical gear (a radio, a first-aid pouch, a GPS) be reachable without taking eyes off the trail. The Rago Fabrication Console MOLLE Panels mount directly to the factory center console and put a full MOLLE grid at hand level, so frequently used items are secured and immediately accessible rather than sliding around a center bin or buried in a bag. The MOLLE pattern accepts a wide range of compatible pouches, holsters, and mounts, letting the layout change as the mission changes without modifying the panel itself.\u003c\/p\u003e\n\n\u003ch2\u003eIntegrated Mounting Points for Digital Devices\u003c\/h2\u003e\n\u003cp\u003eThe panels include 10-24 pre-threaded mounting points machined directly into the steel, providing a solid, rattle-free attachment surface for RAM mount systems and similar device holders. A pre-threaded insert eliminates the need to source separate hardware for phone, tablet, or GPS mounting. The attachment point is already part of the panel. RAM mount compatibility means a broad ecosystem of arms, cradles, and bases works out of the box.\u003c\/p\u003e\n\n\u003ch2\u003eSteel Construction with a Purpose-Built Finish\u003c\/h2\u003e\n\u003cp\u003eThe panels are fabricated from steel and finished in a 2-stage hammer black powder coat, a texture that resists scratches and scuffs better than a flat or gloss coat in a high-contact interior environment. The contoured profile follows the factory console geometry so the panels sit flush rather than standing proud, keeping the interior look intentional rather than improvised.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecise console fitment:\u003c\/strong\u003e contoured to the factory center console of 2023–2026 INEOS Grenadier and Quartermaster\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull MOLLE grid:\u003c\/strong\u003e versatile, adaptable pattern accepts MOLLE-compatible pouches, holsters, and accessories\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e10-24 pre-threaded mounting points:\u003c\/strong\u003e integrated attachment points for RAM mounts and digital devices\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRAM mount compatible:\u003c\/strong\u003e works with the full RAM mount ecosystem of arms and cradles\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSteel construction:\u003c\/strong\u003e durable steel with a 2-stage hammer black powder coat finish\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesigned and tested in the USA:\u003c\/strong\u003e developed by Rago Fabrication in Chandler, Arizona\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eSteel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003e2-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting points\u003c\/td\u003e\n      \u003ctd\u003e10-24 pre-threaded\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRAM mount compatible\u003c\/td\u003e\n      \u003ctd\u003eYes\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e12 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle fitment\u003c\/td\u003e\n      \u003ctd\u003e2023–2026 INEOS Grenadier, 2023–2026 INEOS Quartermaster\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eRequires drilling and Riv-Nut application\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC6504801NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese panels suit 2023–2026 INEOS Grenadier and Quartermaster owners who want organized, arm's-reach access to radios, navigation devices, knives, and pouches during off-road use, and who are comfortable with a drilling and Riv-Nut installation process.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese panels do not fit any vehicle other than the 2023–2026 INEOS Grenadier and Quartermaster. Installation is not tool-free. It requires drilling into the factory console and installing Riv-Nuts. MOLLE-compatible accessories and RAM mount hardware are not included and must be sourced separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich vehicles do these panels fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Center Console MOLLE Panels are designed specifically for the 2023–2026 INEOS Grenadier and the 2023–2026 INEOS Quartermaster. These panels fit only those years and body styles; fitment on other years or vehicles is not confirmed.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat can I mount to these panels?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Console MOLLE Panels accept any MOLLE-compatible pouch, holster, or accessory across the full grid. The integrated 10-24 pre-threaded mounting points are sized for RAM mount arms and cradles, making them suitable for phones, tablets, GPS units, and similar devices.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. Installing the Rago Fabrication Console MOLLE Panels requires drilling into the factory center console and performing Riv-Nut applications.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eAre MOLLE accessories or RAM mount hardware included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eMOLLE-compatible accessories and RAM mount hardware are not included with the Console MOLLE Panels. The panels provide the MOLLE grid and the 10-24 pre-threaded mounting points; pouches, holsters, arms, and cradles must be purchased separately.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621650731078,"sku":"AC6504801NA","price":228.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2023-2026-ineos-grenadier-quartermaster-center-console-molle-sq.jpg?v=1791935748"},{"product_id":"rago-fabrication-2025-2026-toyota-4runner-rock-slider-side-steps","title":"Rago Fabrication 2025-2026 Toyota 4Runner Rock Slider Side Steps","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Rock Slider Side Steps are heavy-duty steel tube sliders built specifically for the 2025–2026 Toyota 4Runner (6th Gen), mounting directly to the frame to protect rocker panels from rocks, brush, and trail impacts while also serving as a solid side step for cab entry and gear access.\u003c\/p\u003e\n\n\u003ch2\u003eFrame-Mounted Protection That Slides Over Obstacles\u003c\/h2\u003e\n\u003cp\u003eRocker panels are among the most vulnerable points on a 4Runner running technical terrain. The Rago Fabrication sliders mount directly to the frame rather than to the body, distributing trail impacts into the vehicle's structure rather than into sheet metal. The heavy-duty tube construction is shaped to slide over rocks and ledges without catching, so the truck keeps moving instead of hanging up mid-obstacle.\u003c\/p\u003e\n\u003cp\u003ePrecision clearancing through the full range of suspension articulation means the sliders do not bind or contact the body as the suspension cycles. That clearance is built in from the design stage, not achieved by pushing the slider outward where it would be more exposed to damage.\u003c\/p\u003e\n\n\u003ch2\u003eA Stepping Surface That Earns Its Place on the Trail\u003c\/h2\u003e\n\u003cp\u003eRock sliders that double as usable steps reduce the need for a separate running board. The Rago Fabrication sliders include strategic step locations sized for cab entry and exit, and positioned to make reaching a roof rack, rooftop tent, or mounted gear practical without a separate step stool. The slim profile preserves ground clearance and keeps the overall silhouette close to the body.\u003c\/p\u003e\n\n\u003ch2\u003eHammer Black Powder Coat and Made-in-USA Construction\u003c\/h2\u003e\n\u003cp\u003eThe hammer black powder coat finish resists corrosion and conceals the scuffs and scratches that accumulate on trail armor over time, so the sliders continue to look intentional rather than worn. Rago Fabrication designs, fabricates, and manufactures these sliders in the USA. The sliders are also designed to match other Rago Fabrication products, making it straightforward to build a cohesive exterior without mismatched finishes or conflicting profiles.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect frame-mount:\u003c\/strong\u003e bolts directly to the 4Runner frame for structural load transfer\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavy-duty tube construction:\u003c\/strong\u003e shaped to slide over obstacles without hanging up\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-purpose design:\u003c\/strong\u003e functions as trail armor and as a side step for cab entry, roof rack, and gear access\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision suspension clearance:\u003c\/strong\u003e clearanced for full suspension articulation without body contact\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHammer black powder coat:\u003c\/strong\u003e corrosion-resistant finish that conceals trail wear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in USA:\u003c\/strong\u003e designed, fabricated, and manufactured in Chandler, Arizona\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2025–2026 Toyota 4Runner (6th Gen)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eHeavy-duty steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eHammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting\u003c\/td\u003e\n      \u003ctd\u003eDirect bolt-on to frame\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eUSA (Chandler, Arizona)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese sliders suit 2025–2026 Toyota 4Runner (6th Gen) owners who run technical off-road terrain and want rocker panel protection that also functions as a side step for cab entry and overhead gear access. They are a strong fit for builds that already include or plan to include other Rago Fabrication exterior components.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese sliders are not compatible with any 4Runner generation other than the 6th Gen (2025–2026). Installation requires some drilling. Weight, tube diameter, and load rating are not published for this product; buyers who need those figures before purchasing should contact TerrainVault before ordering. California residents: this product can expose you to silica, crystalline, known to the State of California to cause cancer. See P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat years and generations of 4Runner do these sliders fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Rock Slider Side Steps are built specifically for the 2025–2026 Toyota 4Runner, which is the 6th generation. They are not designed to fit any earlier 4Runner generation, and fitment should not be assumed for model years outside that range.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication sliders mount directly to the 4Runner frame, and some drilling is required during installation. An install guide is available from Rago Fabrication. Buyers who prefer a fully drill-free install should confirm the specific drilling requirements before ordering.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow does the hammer black powder coat hold up to trail use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe hammer black powder coat finish on these rock sliders is applied specifically to resist corrosion and to conceal the scuffs and scratches that accumulate during trail use. The textured hammer finish helps hide contact marks so the sliders continue to look clean even after repeated rock and brush contact.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan these be used as a regular side step for everyday cab entry?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication sliders include a solid stepping surface and are designed to function as a side step for daily cab entry and exit in addition to their role as trail armor. Step locations are also positioned to improve access to roof racks, rooftop tents, and mounted accessories.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDo these match other Rago Fabrication products?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Rock Slider Side Steps are designed to match other Rago Fabrication exterior products in finish and profile, making it straightforward to build a cohesive exterior on a 6th Gen 4Runner without mismatched components. Compatible Rago Fabrication products for the 2025+ 4Runner include rear shock guards, trailing arm skid plates, and front bumper skid plates.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621654564934,"sku":"S71813NA01NA","price":1449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/6th-Gen-4Runner-Rock-Sliders-and-steps-rago-1-sq.jpg?v=1791935866"},{"product_id":"rago-fabrication-6th-gen-4runner-full-width-winch-front-bumper-for-trd","title":"Rago Fabrication 6th Gen 4Runner Full-Width Winch Front Bumper for TRD Pro and Trailhunter","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Full-Width Winch Front Bumper is a direct-fit front bumper for the 2025–2026 Toyota 4Runner, built specifically for TRD Pro and Trailhunter trim levels. It integrates a concealed winch mount, two CNC-machined D-ring clevis mounts, and a center light bar mount into a single assembly that retains Toyota Safety Sense, OEM parking sensors, and all factory drive assist features. A separate version is available for all other 6th Gen 4Runner trim levels.\u003c\/p\u003e\n\n\u003ch2\u003eRecovery-Ready Without the Bulk\u003c\/h2\u003e\n\u003cp\u003eThe concealed winch mount positions recovery gear behind the bumper face, keeping the front end clean and low-profile without sacrificing access on the trail. Two integrated 1-inch thick CNC D-ring clevis mounts accept 3\/4-inch D-rings, giving the bumper two dedicated recovery points built into the structure. Having those anchor points integrated rather than bolted on means fewer loose components and a more reliable connection when a recovery situation calls for speed.\u003c\/p\u003e\n\n\u003ch2\u003eLighting and Approach Angle Built In\u003c\/h2\u003e\n\u003cp\u003eA center-mounted position accommodates one universal 30-inch dual-row LED light bar, so front lighting is handled at the bumper without a separate fabricated mount. High-clearance side wings open the wheel well area, exposing more of the tire and reducing the effective approach angle at the front corners. On rocky or rutted terrain, that clearance reduces the chance of a wing contacting an obstacle before the tire does.\u003c\/p\u003e\n\n\u003ch2\u003eOEM Systems Stay Intact\u003c\/h2\u003e\n\u003cp\u003eThe bumper is engineered to retain Toyota Safety Sense, OEM parking sensors, and all factory drive assist functionality. Keeping these systems active means the 4Runner's pre-collision system, lane departure warning, and parking aids continue to work as designed after installation. That matters for daily driving between trail runs, where losing driver-assist features would be a meaningful trade-off.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConcealed winch mount:\u003c\/strong\u003e positions a winch behind the bumper face for a clean, low-profile appearance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated D-ring mounts:\u003c\/strong\u003e two 1-inch thick CNC clevis mounts accept 3\/4-inch D-rings for dedicated recovery points\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter light bar mount:\u003c\/strong\u003e fits one universal 30-inch dual-row LED light bar\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-clearance side wings:\u003c\/strong\u003e open the wheel well for oversized tires and improved approach angle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM system retention:\u003c\/strong\u003e compatible with Toyota Safety Sense, OEM parking sensors, and all factory drive assist features\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo-stage hammer black powder coat:\u003c\/strong\u003e durable finish over the full assembly; made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2025–2026 Toyota 4Runner (6th Gen), TRD Pro and Trailhunter trim levels only\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e161 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eTwo-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eD-ring mount thickness\u003c\/td\u003e\n      \u003ctd\u003e1 inch CNC-machined clevis mounts, accepts 3\/4-inch D-rings\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLight bar mount\u003c\/td\u003e\n      \u003ctd\u003eCenter position, fits one universal 30-inch dual-row LED light bar\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOptional skid plate\u003c\/td\u003e\n      \u003ctd\u003e3\/16-inch aluminum, SKU AC7111203NA, sold separately\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eUSA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eF7105131601NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis bumper suits 2025–2026 Toyota 4Runner owners on TRD Pro or Trailhunter trims who want a full-width front bumper with an integrated winch mount, dedicated recovery points, and a light bar position without giving up Toyota Safety Sense or OEM parking sensors. It is a strong fit for overlanding and off-road use where approach angle, recovery capability, and front-end lighting all matter.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis bumper does not fit any 2025–2026 4Runner trim level other than TRD Pro and Trailhunter, and it does not fit earlier 4Runner generations. The LED light bar, D-rings, and winch are not included. The optional aluminum skid plate (AC7111203NA) is sold separately. Installation requires trimming and riv-nut work in addition to the supplied hardware; two people are recommended, and professional installation is advised for those not comfortable with those steps.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich 4Runner trims does this bumper fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThis full-width winch front bumper fits the 2025–2026 Toyota 4Runner in TRD Pro and Trailhunter trim levels only. A separate bumper is available for all other 6th Gen 4Runner trim levels. It does not fit earlier 4Runner generations.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes the bumper include a winch, D-rings, or a light bar?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe bumper includes a concealed winch mount and two integrated 1-inch thick CNC D-ring clevis mounts sized for 3\/4-inch D-rings, but the winch, D-rings, and LED light bar are not included. The center mount accepts one universal 30-inch dual-row LED light bar, purchased separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill this bumper retain Toyota Safety Sense and my parking sensors?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Full-Width Winch Front Bumper is designed to retain Toyota Safety Sense, OEM parking sensors, and all factory drive assist features, so the 4Runner's pre-collision system, lane departure warning, and parking aids continue to function after installation.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does installation involve?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eInstalling this bumper requires trimming and riv-nut installation in addition to direct-fit mounting with the supplied hardware. Two people are recommended for best results. Buyers who are not comfortable with trimming or riv-nut work should consider professional installation.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs a skid plate included, and what options are available?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eA skid plate is not included with this bumper. An optional heavy-duty 3\/16-inch aluminum skid plate (SKU AC7111203NA) is available separately and is designed to pair with this full-width bumper to protect underbody components.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs this bumper compatible with a brush guard?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Full-Width Winch Front Bumper is designed to be expandable with a Rago Brush Guard, listed as a future release. No brush guard is currently included or available for purchase with this bumper.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621655384134,"sku":"F7105131601NA","price":1799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/Rago-Full-Width-4runner-front-bumper-sq.jpg?v=1791935941"},{"product_id":"rago-fabrication-subaru-forester-exterior-molle-panels","title":"Rago Fabrication Subaru Forester Exterior MOLLE Panels","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Exterior MOLLE Storage Panels are bolt-on, powder-coated panels for the 2019–2024 Subaru Forester (excluding Wilderness trim) that mount along the external rear side windows to add accessible gear-mounting surface without consuming interior cargo space. The top edge attaches to the OEM roof rails (no rail removal required), while the bottom is secured by a RAM Mounts heavy-duty suction cup against the rear side glass. Available as a driver-side panel, passenger-side panel, or as a pair.\u003c\/p\u003e\n\n\u003ch2\u003eExternal Storage Without Giving Up Cargo Room\u003c\/h2\u003e\n\u003cp\u003eBy positioning along the exterior rear side windows, the Rago Fabrication MOLLE panels use space that would otherwise go unused. Gear, tools, and trail essentials mount outside the cabin, leaving the Forester's interior cargo area free for passengers, luggage, or other equipment. That separation also keeps muddy or wet recovery gear away from the interior on the return leg of a trip.\u003c\/p\u003e\n\n\u003ch2\u003eStandard MOLLE Pattern With RotopaX Provisions Built In\u003c\/h2\u003e\n\u003cp\u003eEach panel features Rago Fabrication's standard MOLLE pattern, which accepts the broad ecosystem of MOLLE-compatible pouches, holsters, and tool mounts without adapters. Integrated mounting provisions are already built into the panel for adding RotopaX fuel or water containers, with no secondary bracket fabrication needed. For further expansion, the panels are designed to work alongside the Rago Fabrication Overland Crossbars for Factory Roof Rails (Part# AC8509501NA) and Rago Fabrication Quick Fist mounts (Part# R0000MSPQUICK).\u003c\/p\u003e\n\n\u003ch2\u003eMounts to Factory Rails, No Rail Removal Required\u003c\/h2\u003e\n\u003cp\u003eInstallation attaches the top of each panel directly to the Forester's OEM roof rails, so the factory hardware stays in place throughout the process. The lower attachment uses a RAM Mounts heavy-duty suction cup against the rear side window. The install does require drilling and riv-nut installation into the roof rail: this is a permanent, structural mount, not a clamp-on solution. A durable powder-coat finish protects the panel surface for long-term exterior use.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExternal rear side window placement:\u003c\/strong\u003e maximizes unused space along the Forester's exterior without reducing interior cargo volume\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard MOLLE pattern:\u003c\/strong\u003e compatible with a wide range of MOLLE pouches, tool mounts, and accessories\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated RotopaX provisions:\u003c\/strong\u003e built-in mounting points for RotopaX fuel and water containers\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory roof rail mount:\u003c\/strong\u003e attaches to OEM roof rails at the top; no rail removal required during installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRAM Mounts heavy-duty suction cup:\u003c\/strong\u003e secures the lower edge of each panel to the rear side glass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePowder-coat finish:\u003c\/strong\u003e durable exterior-grade coating for long-term use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2019–2024 Subaru Forester (all trims except Wilderness)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting: Top\u003c\/td\u003e\n      \u003ctd\u003eOEM factory roof rails (drilling and riv-nut installation required)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting: Bottom\u003c\/td\u003e\n      \u003ctd\u003eRAM Mounts heavy-duty suction cup to rear side glass\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003ePowder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMOLLE Pattern\u003c\/td\u003e\n      \u003ctd\u003eStandard MOLLE\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRotopaX Compatible\u003c\/td\u003e\n      \u003ctd\u003eYes, integrated mounting provisions included\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVariants \/ SKUs\u003c\/td\u003e\n      \u003ctd\u003eDriver (AC8509301NA) · Passenger (AC8509401NA) · Pair (AC8509201NA)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Accessories\u003c\/td\u003e\n      \u003ctd\u003eRago Fabrication Overland Crossbars (AC8509501NA), Rago Fabrication Quick Fist (R0000MSPQUICK)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese panels suit 2019–2024 Subaru Forester owners who want to add exterior gear-mounting capacity using the factory roof rails, particularly overlanders and trail drivers who need accessible tool or supply storage without giving up interior cargo space.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese panels do not fit the Subaru Forester Wilderness trim. Installation requires permanent drilling into the factory roof rails and riv-nut installation, so these are not a no-drill or reversible solution. The panels are not compatible with aftermarket roof rails that differ from the OEM configuration.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo I have to remove the factory roof rails to install these panels?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Exterior MOLLE Panels are designed to mount directly to the OEM roof rails without requiring their removal. Installation does require drilling into the factory roof rails and riv-nut installation to create a permanent, structural attachment point at the top of each panel.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill these fit the Subaru Forester Wilderness trim?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Rago Fabrication Exterior MOLLE Panels for the Forester are not compatible with the Wilderness trim. They are designed for all other 2019–2024 Subaru Forester trims that retain the standard OEM roof rail configuration.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat holds the bottom of each panel to the vehicle?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe lower edge of each Rago Fabrication MOLLE panel is secured to the rear side glass by a RAM Mounts heavy-duty suction cup. The top edge is permanently mounted to the OEM roof rails via drilling and riv-nut installation, so the suction cup works in combination with that fixed upper attachment rather than as the sole retention method.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan I mount RotopaX fuel or water containers directly to these panels?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. Each Rago Fabrication Exterior MOLLE Panel includes integrated mounting provisions specifically for RotopaX accessories, so no secondary bracket is required. RotopaX containers are sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eAre these sold as a pair, or do I need to buy each side separately?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Forester Exterior MOLLE Panels are available three ways: as a driver-side panel only (SKU AC8509301NA), a passenger-side panel only (SKU AC8509401NA), or as a pair (SKU AC8509201NA). Select the option that matches your build at checkout.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Driver","offer_id":50621657808966,"sku":"AC8509301NA","price":199.99,"currency_code":"USD","in_stock":true},{"title":"Passenger","offer_id":50621657841734,"sku":"AC8509401NA","price":199.99,"currency_code":"USD","in_stock":true},{"title":"Pair","offer_id":50621657874502,"sku":"AC8509201NA","price":379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2019-2024-Subaru-Forester-Exterior-Molle-Panel-Render-sq.jpg?v=1791936009"},{"product_id":"rago-fabrication-gx-550-a-pillar-light-mounts","title":"Rago Fabrication GX 550 A-Pillar Light Mounts","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication A-Pillar Light Mounts are bolt-on steel brackets designed specifically for the 2024–2026 Lexus GX 550, positioning auxiliary pod lights at the A-pillars with a low-profile fit that follows the factory cowl line. Each pair accommodates pod lights up to 6 inches and ships as a driver-and-passenger set finished in a dual-stage hammer black powder coat.\u003c\/p\u003e\n\n\u003ch2\u003eLow-Profile Fit That Preserves the Factory Look\u003c\/h2\u003e\n\u003cp\u003eThe GX 550 A-Pillar Light Mounts are shaped to blend into the cowl rather than stand away from it, so auxiliary lighting integrates with the vehicle's lines instead of reading as an afterthought. For a GX 550 owner who wants improved trail visibility without altering the exterior profile, that fitment precision means the brackets disappear into the body when lights are off and draw attention to the light output rather than the hardware when they're on.\u003c\/p\u003e\n\n\u003ch2\u003eAdjustable Angle and Integrated Wire Management\u003c\/h2\u003e\n\u003cp\u003eAn adjustable mounting angle lets you dial in light aim after installation rather than committing to a fixed position during the build. That flexibility matters when running different pod light models or when terrain changes how you want the beam pattern oriented. Integrated wire management routes the wiring cleanly behind the bracket, keeping leads secured and out of sight for a finished appearance that holds up over rough roads and repeated vibration.\u003c\/p\u003e\n\n\u003ch2\u003eBolt-On Installation, No Cutting Required\u003c\/h2\u003e\n\u003cp\u003eThe fully bolt-on design requires no cutting or drilling into the vehicle, which keeps the installation reversible and the factory sheetmetal intact. The dual-stage hammer black powder coat finish is built to resist the moisture, mud, and UV exposure that come with regular off-road use, so the brackets maintain their appearance through extended trail seasons without needing touch-up.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAccommodates up to 6-inch pod lights\u003c\/strong\u003e, compatible with a wide range of auxiliary lighting options\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustable mounting angle:\u003c\/strong\u003e fine-tune light aim after installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated wire management:\u003c\/strong\u003e routes and secures wiring for a clean, professional finish\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-stage hammer black powder coat:\u003c\/strong\u003e corrosion- and UV-resistant finish for harsh environments\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFully bolt-on installation:\u003c\/strong\u003e no cutting or drilling required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExpandable:\u003c\/strong\u003e compatible with Rago Extension Brackets (RACCDITEXT) and Rago HAM Antenna Extension (R0000ACCHAMEXT), each sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2024–2026 Lexus GX 550\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eSteel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eDual-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMax Pod Light Size\u003c\/td\u003e\n      \u003ctd\u003e6 inches\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting Style\u003c\/td\u003e\n      \u003ctd\u003eBolt-on, no cutting or drilling\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eQuantity\u003c\/td\u003e\n      \u003ctd\u003eSold as a pair (driver and passenger side)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese A-pillar light mounts suit 2024–2026 Lexus GX 550 owners who want to add auxiliary pod lighting at the A-pillars with a clean, factory-integrated appearance and no permanent modifications to the vehicle.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese brackets do not fit any other Lexus GX generation, any Toyota Land Cruiser variant, or any other vehicle. Pod lights, wiring harnesses, and switches are not included and must be sourced separately. The Rago Extension Brackets and HAM Antenna Extension are also sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Lexus GX 550 model years do these A-pillar light mounts fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication GX 550 A-Pillar Light Mounts are designed specifically for the 2024, 2025, and 2026 Lexus GX 550. They are not compatible with earlier GX generations (GX 460 or GX 470) or any other vehicle platform.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat size pod lights will these brackets accept?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe GX 550 A-Pillar Light Mounts accommodate pod lights up to 6 inches in diameter, which covers the majority of common auxiliary pod light options. Pod lights are not included and are sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDo these brackets require drilling or cutting into the vehicle?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The GX 550 A-Pillar Light Mounts use a fully bolt-on design that requires no cutting or drilling into the vehicle's body or sheetmetal, keeping the installation clean and reversible.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow many brackets are included, and which sides do they cover?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach purchase includes one pair of A-pillar light mounts (one driver-side bracket and one passenger-side bracket), finished in dual-stage hammer black powder coat.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the light angle be adjusted after installation?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The GX 550 A-Pillar Light Mounts feature an adjustable mounting angle, so pod light aim can be fine-tuned after the brackets are installed rather than being fixed at a single position.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eAre these brackets expandable with other Rago accessories?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe GX 550 A-Pillar Light Mounts are compatible with the Rago Extension Brackets (RACCDITEXT) and the Rago HAM Antenna Extension (R0000ACCHAMEXT), both of which are sold separately and allow the mounting platform to be extended for additional accessories.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621679730758,"sku":"AC8407701NA","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/Lexus-GX-550-A-Pillar-Light-Brackets-Render-sq.jpg?v=1791936064"},{"product_id":"rago-fabrication-lexus-gx-550-winch-front-bumper","title":"Rago Fabrication Lexus GX 550 Winch Front Bumper","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Winch Front Bumper is a direct-bolt-on front-end replacement built specifically for the 2024–2026 Lexus GX 550, integrating a concealed winch mount, dual CNC-machined D-ring clevis mounts, and mounts for a 30\" center light bar and two 10\" single-row light bars. The bumper retains the GX 550's Lexus Safety System, OEM parking sensors, and factory driver assist features throughout. Minor trimming and riv-nut installation are required to complete the fit.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Recovery Without Compromise\u003c\/h2\u003e\n\u003cp\u003eThe heavy-duty concealed winch mount is recessed into the bumper structure, keeping the winch low-profile and shielded from trail debris while accepting most standard winches. Dual 1\" thick CNC-machined D-ring clevis mounts are integrated at each end, sized for 3\/4\" D-rings, so dedicated recovery points are part of the bumper rather than an afterthought bolted on later. Having recovery hardware built into the structure means the attachment points share load with the bumper itself, a meaningful difference when pulling a vehicle out of a rut under tension.\u003c\/p\u003e\n\n\u003ch2\u003eLighting Ready from the Start\u003c\/h2\u003e\n\u003cp\u003eA center mount accommodates one universal 30\" LED light bar, and two side mounts each accept a universal 10\" single-row LED light bar. Routing and mounting positions are designed into the bumper, so there is no need to fabricate brackets or compromise the bumper's lines to add forward lighting. LED light bars and wiring are not included and sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eOEM Features Intact, Approach Angle Improved\u003c\/h2\u003e\n\u003cp\u003eThe GX 550 Winch Front Bumper retains full compatibility with the Lexus Safety System, OEM parking sensors, and all factory driver assist features, so the electronics that came with the vehicle keep working after the swap. High-clearance wings and an open wheel well design improve approach angles at the front tires and allow fitment of larger tires without the factory bumper becoming a limiting factor. The 2-stage hammer black powder coat finish is applied in two stages for durability against trail exposure and UV. The bumper is manufactured in Chandler, Arizona.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConcealed winch mount:\u003c\/strong\u003e heavy-duty integrated mount accepts most standard winches while keeping the profile low and protected\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual D-ring clevis mounts:\u003c\/strong\u003e 1\" thick CNC-machined mounts integrated at each end, sized for 3\/4\" D-rings\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated light mounts:\u003c\/strong\u003e one center mount for a 30\" LED light bar and two side mounts for 10\" single-row LED light bars\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM system retention:\u003c\/strong\u003e retains Lexus Safety System, OEM parking sensors, and all factory driver assist features\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-clearance design:\u003c\/strong\u003e open wheel well and high-clearance wings improve approach angle and allow oversized tire fitment\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2-stage hammer black powder coat:\u003c\/strong\u003e durable two-stage finish applied over direct bolt-on construction; made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2024–2026 Lexus GX 550\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWinch Mount\u003c\/td\u003e\n      \u003ctd\u003eHeavy-duty concealed, accepts most standard winches\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eD-Ring Clevis Mounts\u003c\/td\u003e\n      \u003ctd\u003e2 mounts, 1\" thick CNC-machined, for 3\/4\" D-rings\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLight Bar Mount (center)\u003c\/td\u003e\n      \u003ctd\u003e1 mount, universal 30\" LED light bar\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLight Bar Mounts (sides)\u003c\/td\u003e\n      \u003ctd\u003e2 mounts, universal 10\" single-row LED light bars\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003e2-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOptional Skid Plate\u003c\/td\u003e\n      \u003ctd\u003e3\/16\" aluminum (SKU AC8411203NA, sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eDirect bolt-on with supplied hardware; minor trimming and riv-nut installation required\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOrigin\u003c\/td\u003e\n      \u003ctd\u003eMade in USA (Chandler, Arizona)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eF8404227301NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Rago Fabrication GX 550 Winch Front Bumper suits 2024–2026 Lexus GX 550 owners building an overlanding or off-road rig who want a winch-ready, recovery-capable front end with integrated lighting positions and no loss of factory safety electronics.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis bumper fits only the 2024–2026 Lexus GX 550 and does not fit any earlier GX generation or other vehicle. LED light bars, the winch, D-rings, and wiring are not included. The optional 3\/16\" aluminum skid plate (SKU AC8411203NA) is sold separately. Installation requires minor trimming and riv-nut installation; professional installation is recommended if those steps are outside your skill set.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich winches fit the concealed mount?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe GX 550 Winch Front Bumper's concealed mount is designed to accept most standard winches. A specific winch capacity or brand compatibility list is not published for this mount; confirm your winch's footprint against the mount dimensions before purchasing. The winch is not included.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo the OEM parking sensors and Lexus Safety System still work after installation?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The GX 550 Winch Front Bumper is designed to retain the Lexus Safety System, OEM parking sensors, and all factory driver assist features, so the vehicle's stock electronics continue to function after the bumper swap.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat size light bars fit the integrated mounts?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe GX 550 Winch Front Bumper includes a center mount for one universal 30\" LED light bar and two side mounts each sized for a universal 10\" single-row LED light bar. Light bars and wiring are not included with the bumper and must be purchased separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow difficult is installation, and what does it require?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe GX 550 Winch Front Bumper uses direct bolt-on fitment with supplied hardware, but minor trimming and riv-nut installation are also required to complete the fit. An install guide is available. Professional installation is recommended if trimming or riv-nut work is outside your experience.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eAre D-rings included with the bumper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eD-rings are not included. The GX 550 Winch Front Bumper integrates two 1\" thick CNC-machined D-ring clevis mounts sized for 3\/4\" D-rings, but the D-rings themselves must be sourced separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs the skid plate included, and what is it made of?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe skid plate is not included with the GX 550 Winch Front Bumper. The optional heavy-duty 3\/16\" aluminum skid plate (SKU AC8411203NA) is available as a separate add-on for additional underbody protection.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621680779334,"sku":"F8404227301NA","price":1699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/LexusGX550WinchFrontBumperRender-sq.jpg?v=1791936148"},{"product_id":"rago-fabrication-lexus-gx-550-full-width-rear-bumper","title":"Rago Fabrication Lexus GX 550 Full-Width Rear Bumper","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Full-Width Rear Bumper is a replacement rear bumper built specifically for the 2024–2026 Lexus GX 550, delivering improved departure angles, expanded wheel well clearance for larger tires, and integrated side light mounts, all while retaining the factory parking sensors and blind spot monitoring system. Made in the USA, this bumper is finished in a 2-stage hammer black powder coat with satin black accents. Trimming is required for installation.\u003c\/p\u003e\n\n\u003ch2\u003eExpanded Clearance Where It Counts\u003c\/h2\u003e\n\u003cp\u003eThe Rago Fabrication GX 550 rear bumper increases the rear wheel well opening compared to the factory bumper, giving larger tires room to move without rubbing on trail. For GX 550 owners who have already upgraded or are planning to upgrade tire size, this clearance gain removes a common limiting factor: no need to trim the stock bumper or compromise on tire diameter. The higher rear profile raises the departure angle, so the bumper clears obstacles on descents and trail exits rather than dragging or catching on rocks and ruts.\u003c\/p\u003e\n\n\u003ch2\u003eIntegrated Light Mounts, No Custom Fabrication\u003c\/h2\u003e\n\u003cp\u003eSide light mounts are built into the bumper structure to accept two Baja Designs S2 lights or two Rigid Industries SRM lights. Rear-facing auxiliary lighting improves visibility when backing into a campsite, navigating a trail in reverse, or working around the vehicle after dark. Having the mount positions engineered into the bumper means the lights sit at a consistent, purposeful angle without requiring a separate bracket kit or custom welding.\u003c\/p\u003e\n\n\u003ch2\u003eOEM Safety Systems Stay Active\u003c\/h2\u003e\n\u003cp\u003eThe Rago Fabrication GX 550 rear bumper is designed to retain the factory parking sensors and blind spot monitoring sensors in their original positions. Keeping these systems functional means no warning lights on the dash, no dealer reprogramming visit, and no loss of the driver-assist features the GX 550 came with. The bumper delivers higher clearance and an aggressive aftermarket stance without trading away OEM sensor compatibility.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated side light mounts:\u003c\/strong\u003e accepts (2) Baja Designs S2 or (2) Rigid Industries SRM lights\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExpanded wheel well opening:\u003c\/strong\u003e increases clearance for larger tires\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigher rear profile:\u003c\/strong\u003e improves departure angle on trail\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM sensor retention:\u003c\/strong\u003e retains factory parking sensors and blind spot monitoring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2-stage hammer black powder coat:\u003c\/strong\u003e durable finish with satin black accents\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e manufactured domestically by Rago Fabrication\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2024–2026 Lexus GX 550\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStyle\u003c\/td\u003e\n      \u003ctd\u003eFull-width rear bumper\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003e2-stage hammer black powder coat with satin black accents\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLight Mount Compatibility\u003c\/td\u003e\n      \u003ctd\u003e(2) Baja Designs S2 or (2) Rigid Industries SRM (side positions)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOEM Sensor Compatibility\u003c\/td\u003e\n      \u003ctd\u003eRetains factory parking sensors and blind spot monitoring\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation Note\u003c\/td\u003e\n      \u003ctd\u003eTrimming required for proper fitment\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOrigin\u003c\/td\u003e\n      \u003ctd\u003eMade in the USA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis bumper suits 2024–2026 Lexus GX 550 owners who want improved departure angles and larger-tire clearance for off-road and overlanding use, and who want to add rear-facing auxiliary lighting without sourcing a separate bracket kit. It is a direct fit for that specific generation and model, retaining factory driver-assist sensor function.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis bumper does not fit any GX generation other than the 2024–2026 GX 550, and it does not fit other Lexus models. Auxiliary lights are not included; the bumper provides the mounts only. Installation is not a straightforward bolt-on swap; trimming is required for proper fitment.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this bumper keep the factory parking sensors and blind spot monitoring working?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication GX 550 Full-Width Rear Bumper is designed to retain the OEM parking sensors and blind spot monitoring sensors in their original positions, so both systems remain active after installation without requiring reprogramming or sensor relocation.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat lights fit the integrated side mounts?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe side mounts on this rear bumper are sized for two Baja Designs S2 lights or two Rigid Industries SRM lights. Lights are not included with the bumper and must be purchased separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes installing this bumper require cutting or trimming?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. Trimming is required for proper fitment of this GX 550 rear bumper. Buyers should plan for this step before beginning installation.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the finish on this bumper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication GX 550 Full-Width Rear Bumper is finished in a 2-stage hammer black powder coat with satin black accents, providing a durable, corrosion-resistant surface suited to off-road and outdoor environments.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs this bumper made in the United States?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication GX 550 Full-Width Rear Bumper is manufactured in the USA by Rago Fabrication.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621681336390,"sku":"R840235090103","price":1629.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/Lexus-GX-550-Full-Width-Rear-Bumper-Render-sq.jpg?v=1791936197"},{"product_id":"rago-fabrication-2024-2026-lexus-gx-550-front-bumper-skid-plate","title":"Rago Fabrication 2024-2026 Lexus GX 550 Front Bumper Skid Plate","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Lexus GX 550 Front Bumper Skid Plate is a bolt-on underbody shield machined from 3\/16-inch aluminum, designed exclusively for use with the Rago Full-Width Winch Front Bumper on 2024–2026 Lexus GX 550 trucks. It protects critical front-end components from rocks, debris, and trail obstacles while integrating flush with the bumper for a clean, purpose-built appearance.\u003c\/p\u003e\n\n\u003ch2\u003eUnderbody Protection Where the Trail Gets Technical\u003c\/h2\u003e\n\u003cp\u003eFront-end underbody components on the GX 550 sit exposed to whatever the trail throws up: rocks, stumps, compressed debris, and ledge strikes. The Rago skid plate positions 3\/16-inch aluminum directly in that impact zone, giving those components a first line of defense before trail hazards can reach them. That thickness is substantial enough to deflect glancing rock strikes without the weight penalty of steel, so the front axle load stays manageable and approach geometry is not compromised.\u003c\/p\u003e\n\n\u003ch2\u003eIntegrated Fit with the Rago Bumper System\u003c\/h2\u003e\n\u003cp\u003eBecause the skid plate is engineered specifically as an add-on for the Rago Full-Width Winch Front Bumper (Part # F8404227301NA), it mounts flush without gaps, brackets, or adapters. The satin black powder coat finish matches the bumper's own coating, so the two pieces read as a single unit rather than a field-expedient combination. Corrosion resistance from the powder coat matters in environments where trail mud, road salt, and standing water are routine.\u003c\/p\u003e\n\n\u003ch2\u003eRemovable for Routine Service\u003c\/h2\u003e\n\u003cp\u003eThe skid plate is designed to come off without pulling the bumper or blocking access to the oil drain and filter. Quick removal for oil changes or front-end inspections means the protection does not become a maintenance liability over time. That is a practical consideration for a vehicle used regularly both on trail and on road.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3\/16-inch aluminum construction:\u003c\/strong\u003e heavy-duty material that deflects trail impacts while keeping weight lower than a comparable steel plate\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSatin black powder coat finish:\u003c\/strong\u003e corrosion-resistant coating matched to the Rago bumper system's finish\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBumper-integrated mounting:\u003c\/strong\u003e engineered exclusively for the Rago Full-Width Winch Front Bumper (Part # F8404227301NA) for a flush, gap-free fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable design:\u003c\/strong\u003e allows quick access for oil changes and routine front-end maintenance without removing the bumper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2024–2026 Lexus GX 550 fitment:\u003c\/strong\u003e precision-fit to this generation only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003e3\/16-inch aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eSatin black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2024–2026 Lexus GX 550\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRequired Companion Part\u003c\/td\u003e\n      \u003ctd\u003eRago Full-Width Winch Front Bumper (Part # F8404227301NA)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC8411203NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis skid plate suits 2024–2026 Lexus GX 550 owners who have already installed or are purchasing the Rago Full-Width Winch Front Bumper and want integrated underbody protection for off-road and overlanding use.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis skid plate does not mount to the GX 550's factory bumper or any other aftermarket bumper. It requires the Rago Full-Width Winch Front Bumper (Part # F8404227301NA) as a prerequisite. It does not fit any Lexus GX generation other than the 2024–2026 GX 550, and the Rago bumper is sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill this skid plate fit my GX 550's factory bumper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication GX 550 Front Bumper Skid Plate is engineered exclusively for the Rago Full-Width Winch Front Bumper (Part # F8404227301NA). It is not compatible with the factory Lexus bumper or any other aftermarket bumper. The mounting points and profile are specific to the Rago bumper system.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat years and models does this skid plate fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago GX 550 skid plate fits 2024, 2025, and 2026 model-year Lexus GX 550 trucks. It does not fit earlier GX generations (GX 460 or GX 470) or any other Lexus model.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the skid plate made of?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe skid plate is constructed from 3\/16-inch aluminum and finished with a satin black powder coat for corrosion resistance. Aluminum at this thickness provides meaningful impact deflection against rocks and trail debris while adding less weight than a comparable steel plate.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan I remove the skid plate for oil changes?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago GX 550 skid plate is designed to be easily removable, allowing access for routine maintenance including oil changes and front-end service without requiring removal of the bumper itself.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs the Rago front bumper included with this skid plate?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Full-Width Winch Front Bumper (Part # F8404227301NA) is sold separately. This listing covers the skid plate only, which is an add-on component for that bumper system.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621683990598,"sku":"AC8411203NA","price":429.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/Lexus-GX-550-Skid-Plate-for-Rago-Front-Bumper-Render-sq.jpg?v=1791936264"},{"product_id":"rago-fabrication-subaru-forester-overland-crossbars-2019-2024","title":"Rago Fabrication Subaru Forester Overland Crossbars 2019-2024","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Subaru Forester Overland Crossbars are a five-piece steel crossbar set that mounts directly to the factory roof rails of 2019–2024 Subaru Foresters, adding a versatile, low-profile foundation for gear without requiring a full roof rack or interior disassembly. One set covers the standard Forester; these crossbars do not fit the 2022–2025 Forester Wilderness, which uses different factory roof rails.\u003c\/p\u003e\n\n\u003ch2\u003eNo Interior Teardown Required\u003c\/h2\u003e\n\u003cp\u003eMost aftermarket roof rack systems for the Forester require removing side door trim and headliner panels. That process can take several hours before a single crossbar goes on. The Rago Fabrication crossbars mount directly to the existing factory roof rails, bypassing that disassembly entirely. Installation does require drilling and riv-nut installation into the roof rails, but the process is straightforward compared to full rack systems that demand interior access. For buyers who want a capable roof platform without a weekend-long install, that difference is meaningful.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Expansion, Not Just the Day-One Load\u003c\/h2\u003e\n\u003cp\u003eThe crossbars ship with universal mounting patterns, so the same set that carries a rooftop tent today can be reconfigured for a bike rack, kayak carrier, or storage box without buying new hardware. Integrated RotopaX mounting provisions are built in, and the crossbars are L-Track compatible for modular load management. Rago's own E-MSP exterior MOLLE panels (sold separately) and Quick Fist mounts expand the system further, keeping the roof platform useful as a build evolves rather than locking an owner into one configuration.\u003c\/p\u003e\n\n\u003ch2\u003eSteel Construction, Low-Profile Fit\u003c\/h2\u003e\n\u003cp\u003eEach crossbar is constructed from steel and finished in a hammer black powder coat that resists corrosion and daily wear. The low-profile design keeps the overall roof height close to stock, which matters for garage clearance and highway wind noise. Because the crossbars follow the curve of the Forester's factory roof rails, longer items such as a large storage box, water tank, or rooftop tent may require removing the center crossmembers for flush mounting, or using half-inch spacers to align the mounting points. Buyers planning to run a full-length load should account for this before finalizing their accessory selection.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSet of five crossbars:\u003c\/strong\u003e sold as a complete set sized for the 2019–2024 Subaru Forester factory roof rails\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal mounting patterns:\u003c\/strong\u003e compatible with rooftop tents, storage boxes, bike racks, and kayak\/SUP carriers\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated RotopaX provisions:\u003c\/strong\u003e built-in mounting points for RotopaX fuel and water containers\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eL-Track compatible:\u003c\/strong\u003e accepts L-Track accessories for modular load organization\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSteel with hammer black powder coat:\u003c\/strong\u003e corrosion-resistant finish for on- and off-road use\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExpandable:\u003c\/strong\u003e compatible with Rago E-MSP exterior MOLLE panels and Quick Fist mounts (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2019–2024 Subaru Forester (standard factory roof rails only; does not fit 2022–2025 Forester Wilderness)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eQuantity\u003c\/td\u003e\n      \u003ctd\u003e5 crossbars per set\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eSteel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eHammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e54 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting\u003c\/td\u003e\n      \u003ctd\u003eRequires drilling and riv-nut installation into factory roof rails\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatibility\u003c\/td\u003e\n      \u003ctd\u003eL-Track; RotopaX; Rago E-MSP exterior MOLLE panels; Quick Fist mounts\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC8509501NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese crossbars suit 2019–2024 Subaru Forester owners who want to add a capable, modular roof platform to their existing factory roof rails without purchasing a full rack system or performing interior disassembly. They work well for overlanding builds, car camping setups, and daily-use configurations carrying rooftop tents, bike racks, storage boxes, or kayak carriers.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese crossbars do not fit the 2022–2025 Subaru Forester Wilderness, which uses different factory roof rails. They are not a standalone roof rack and cannot be installed on a Forester without factory roof rails already present. Longer items such as large storage boxes, water tanks, or full-size rooftop tents may not mount flush without removing the center crossmembers or adding half-inch spacers, which buyers should plan for before purchasing those accessories.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo these crossbars fit the Subaru Forester Wilderness?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Rago Fabrication Forester crossbars are not compatible with the 2022–2025 Subaru Forester Wilderness. The Wilderness uses different factory roof rails than the standard Forester, and these crossbars are designed specifically for the standard factory rail found on 2019–2024 non-Wilderness models.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. Mounting the Rago Fabrication Forester crossbars requires drilling and riv-nut installation into the factory roof rails. The crossbars then bolt onto those rail mounts. No interior disassembly of door trim or headliner panels is required, which distinguishes this system from most full roof rack options for the Forester.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow many crossbars come in the set?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Subaru Forester Overland Crossbars are sold as a set of five crossbars. All five are included in a single purchase and are sized for the factory roof rails of the 2019–2024 Subaru Forester.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill a rooftop tent or large storage box mount flush?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eDue to the curve in the Forester's factory roof rails, longer items such as a rooftop tent, large storage box, or water tank may not sit flush across all five crossbars. In those cases, the center crossmembers can be removed to allow flush mounting, or half-inch spacers can be used to align the mounting points. Buyers planning a full-length load should account for this before selecting accessories.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat accessories are compatible with these crossbars?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Forester crossbars feature universal mounting patterns and are compatible with rooftop tents, storage boxes, bike racks, and kayak\/SUP carriers. They also include integrated RotopaX mounting provisions, are L-Track compatible, and can be expanded with Rago E-MSP exterior MOLLE panels and Quick Fist mounts, which are sold separately.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621686022214,"sku":"AC8509501NA","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2019-2024-Subaru-Forester-SK-Crossmembers-Render-1-sq.jpg?v=1791936343"},{"product_id":"rago-fabrication-subaru-forester-rear-cargo-molle-pocket-panels","title":"Rago Fabrication Subaru Forester Rear Cargo MOLLE Pocket Panels","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Rear Cargo MOLLE Pocket Panels are steel-construction side-panel organizers built for the 2019–2024 Subaru Forester, adding a MOLLE mounting surface and a rear cubby to the otherwise unused space along each rear cargo sidewall. Available as a driver side panel, a passenger side panel, or both.\u003c\/p\u003e\n\n\u003ch2\u003eOrganized Cargo, Every Trip\u003c\/h2\u003e\n\u003cp\u003eLoose gear sliding around a cargo area is a real problem on trails and city streets alike. The Rear Cargo MOLLE Pocket Panels mount flush to the Forester's rear side panels, converting dead wall space into an active storage surface. The MOLLE webbing grid accepts standard MOLLE-compatible pouches, straps, and accessories, so camping supplies, recovery tools, pet essentials, and daily-carry items each have a fixed, repeatable place rather than shifting with every corner.\u003c\/p\u003e\n\u003cp\u003eBeyond the MOLLE surface itself, each panel creates a rear cubby: a recessed pocket that holds bulkier loose items without requiring a pouch or strap. That combination of structured mounting and open pocket space means the panels work for organized overlanders and casual weekend users equally well.\u003c\/p\u003e\n\n\u003ch2\u003eSteel Construction with a Durable Finish\u003c\/h2\u003e\n\u003cp\u003eEach panel is fabricated from steel and finished in a hammer black powder coat. Powder coat over steel resists chips, scratches, and moisture better than paint alone, which matters in a cargo area that sees wet gear, muddy boots, and constant loading. The one-piece design eliminates the flex points and fastener gaps that cause rattle on multi-piece panels. The panel stays quiet on rough roads.\u003c\/p\u003e\n\n\u003ch2\u003eDriver Side, Passenger Side, or Both\u003c\/h2\u003e\n\u003cp\u003eThe panels are sold individually by side, so buyers can equip one side to complement existing storage or both sides to maximize rear cargo organization. Rago's Quick Fist Mounts are compatible with these panels for additional mounting options and are sold separately. Note that the passenger side panel is not compatible with Forester vehicles equipped with the factory subwoofer.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMOLLE webbing grid:\u003c\/strong\u003e accepts standard MOLLE-compatible pouches and accessories for flexible, reconfigurable storage\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRear cubby pocket:\u003c\/strong\u003e open recessed space holds loose gear without requiring a separate pouch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSteel construction:\u003c\/strong\u003e one-piece fabrication with no rattle-prone joints or gaps\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHammer black powder coat:\u003c\/strong\u003e chip- and scratch-resistant finish suited to active cargo use\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDriver and passenger side variants:\u003c\/strong\u003e purchase one or both to suit your storage layout\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuick Fist Mount compatible:\u003c\/strong\u003e expandable with Rago Quick Fist Mounts (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2019–2024 Subaru Forester\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eSteel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eHammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight (each)\u003c\/td\u003e\n      \u003ctd\u003e5 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVariants\u003c\/td\u003e\n      \u003ctd\u003eDriver Side (AC8511601NA) · Passenger Side (AC8511701NA)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eDrilling and Riv-Nut installation required\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese panels suit 2019–2024 Subaru Forester owners who want to add organized, MOLLE-compatible storage to their rear cargo area, whether for overlanding, camping, pet travel, or daily use where loose gear needs a fixed place.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe passenger side panel does not fit Forester vehicles equipped with the factory subwoofer. Installation requires drilling and Riv-Nut work, so these panels are not a tool-free or reversible-mount option. Quick Fist Mounts are not included.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo I need to drill to install these panels?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication Rear Cargo MOLLE Pocket Panels require drilling and Riv-Nut installation to mount to the Forester's rear side panels. Separate install guides are available for the driver side and passenger side panels. This is not a no-drill or adhesive-mount installation.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill the passenger side panel fit my Forester if it has the factory subwoofer?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The passenger side Rear Cargo MOLLE Pocket Panel is not compatible with 2019–2024 Subaru Forester vehicles equipped with the factory subwoofer. The driver side panel does not carry this restriction. Confirm your vehicle's audio configuration before ordering the passenger side variant.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eAre these panels compatible with standard MOLLE pouches and accessories?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rear Cargo MOLLE Pocket Panels use a standard MOLLE webbing pattern, which accepts a wide range of MOLLE-compatible pouches, straps, and accessories from various brands. Rago's own Quick Fist Mounts are also compatible and are sold separately for additional mounting options.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan I buy just one side, or do I need to purchase both?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rear Cargo MOLLE Pocket Panels are sold individually by side: driver side and passenger side are separate SKUs. You can purchase one panel to add storage on a single side or both to maximize rear cargo organization across the full width of the Forester's cargo area.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included with each panel?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eHardware contents for each panel kit are not listed in the product specifications. Confirm what is included before purchase if a complete hardware kit is a deciding factor. Quick Fist Mounts are sold separately and are not included with either panel.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Passenger Side","offer_id":50621687595078,"sku":"AC8511701NA","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Driver Side","offer_id":50621687627846,"sku":"AC8511601NA","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2019-2024-Subaru-Forester-Rear-Cargo-Pocket-Molles-10-sq.jpg?v=1791936399"},{"product_id":"rago-fabrication-2019-2024-subaru-forester-ditch-light-brackets","title":"Rago Fabrication 2019-2024 Subaru Forester Ditch Light Brackets","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Ditch Light Brackets mount at the A-pillars of the 2019–2024 Subaru Forester, providing a low-profile, bolt-on solution for adding auxiliary lighting without cutting or drilling. Sold as a driver and passenger side pair, the brackets are built from steel and finished in a dual-stage hammer black powder coat. Slotted mounting holes accommodate 3-inch light pods and support lights up to 6 inches at each A-pillar.\u003c\/p\u003e\n\n\u003ch2\u003eClean Installation, No Modifications Required\u003c\/h2\u003e\n\u003cp\u003eThe fully bolt-on design means the brackets attach using existing mounting points on the 2019–2024 Forester: no cutting, no drilling, and no permanent changes to the vehicle. For owners who want a capable lighting setup without altering factory bodywork, that matters: the truck stays reversible, resale value is protected, and the install does not require body or fabrication work. The low-profile shape follows the factory A-pillar lines closely, so the brackets do not add visual bulk or interfere with the driver's field of view.\u003c\/p\u003e\n\n\u003ch2\u003eAdjustable Positioning for Precise Light Aim\u003c\/h2\u003e\n\u003cp\u003eSlotted mounting holes let the installer shift each bracket to dial in the exact lens angle before tightening down. Slotted holes allow the beam pattern to be set for the terrain and the specific lights being used, whether 3-inch pods or lights up to 6 inches, rather than accepting a fixed position. Integrated zip tie holes run alongside the mounting points, giving wiring a clean, organized path from the light to the cab without loose cables or aftermarket wire clips.\u003c\/p\u003e\n\n\u003ch2\u003eA Foundation for a Growing Build\u003c\/h2\u003e\n\u003cp\u003eThe brackets are compatible with Rago extension accessories, including additional light mounting extensions (Part # RACCDITEXT) and a HAM antenna extension (Part # R0000ACCHAMEXT), both sold separately. That expandability means the ditch-light position can serve more than one function as a build develops, a practical consideration for overlanders who add gear incrementally rather than all at once. The dual-stage hammer black powder coat finish is built to handle exposure to moisture, dust, and UV without flaking or fading.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold as a pair:\u003c\/strong\u003e includes driver and passenger side brackets\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLight pod compatibility:\u003c\/strong\u003e ideal for 3-inch pods; supports lights up to 6 inches at each A-pillar\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBolt-on installation:\u003c\/strong\u003e no cutting or drilling required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlotted mounting holes:\u003c\/strong\u003e adjustable for precise light positioning\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire management:\u003c\/strong\u003e integrated zip tie holes for a clean wiring run\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExpandable:\u003c\/strong\u003e compatible with Rago extension brackets (Part # RACCDITEXT) and HAM antenna extension (Part # R0000ACCHAMEXT), sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2019–2024 Subaru Forester\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eSteel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eDual-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLight Compatibility\u003c\/td\u003e\n      \u003ctd\u003eIdeal for 3-inch light pods; supports up to 6-inch lights at each A-pillar\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting\u003c\/td\u003e\n      \u003ctd\u003eFully bolt-on; slotted holes for adjustability\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eQuantity\u003c\/td\u003e\n      \u003ctd\u003eSold as a driver and passenger side pair\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC8507701NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese brackets suit 2019–2024 Subaru Forester owners who want to add A-pillar ditch lighting for overlanding, trail driving, or off-road use and prefer a bolt-on install that leaves the vehicle unmodified. They work with a wide range of 3-inch light pods and can accommodate lights up to 6 inches at each A-pillar.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese brackets do not fit Subaru Forester model years outside 2019–2024, and they are not confirmed to fit any other Subaru model or vehicle make. Lights, wiring harnesses, and Rago extension accessories are not included and must be purchased separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat vehicles do these ditch light brackets fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Ditch Light Brackets are designed specifically for the 2019–2024 Subaru Forester. They are not confirmed to fit any other Subaru model year, trim, or vehicle make, and fitment should not be assumed outside the stated range.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat size lights are compatible with these brackets?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Forester ditch light brackets are designed for 3-inch light pods and can also support lights up to 6 inches at each A-pillar location. Lights are not included and must be sourced separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDo these brackets require drilling or cutting to install?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Rago Fabrication Forester Ditch Light Brackets use a fully bolt-on design that attaches to existing mounting points. No cutting, drilling, or permanent modification to the vehicle is required.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow do the slotted mounting holes work?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe slotted mounting holes on these ditch light brackets allow the installer to shift each bracket's position before final tightening, making it possible to fine-tune the aim of the mounted light for the desired beam direction and coverage pattern.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eAre extension accessories or antenna mounts included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eExtension accessories are not included. The Rago Fabrication Forester Ditch Light Brackets are compatible with the Rago light mounting extension (Part # RACCDITEXT) and the Rago HAM antenna extension (Part # R0000ACCHAMEXT), both of which are sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow is the finish protected against weather and corrosion?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Forester Ditch Light Brackets are finished in a dual-stage hammer black powder coat, which is applied to the steel construction to resist moisture, dust, and environmental exposure during off-road and overlanding use.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621690085446,"sku":"AC8507701NA","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2019-2024-Subaru-Forester-SK-Ditch-Light-Brackets-sq.jpg?v=1791936487"},{"product_id":"rago-fabrication-rear-window-molle-storage-panels-for-subaru-forester","title":"Rago Fabrication Rear Window MOLLE Storage Panels for Subaru Forester","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Rear Window MOLLE Storage Panels are laser-cut steel panels that convert the unused space along the rear compartment windows of the 2019–2024 Subaru Forester into organized, accessible storage. Sold as a driver and passenger side pair, each panel is formed to follow the window contour so the mounting surface stays within the existing footprint without reducing cargo space.\u003c\/p\u003e\n\n\u003ch2\u003eStorage Where There Was None\u003c\/h2\u003e\n\u003cp\u003eThe rear side windows of the Forester leave a band of vertical real estate that most owners never use. These panels claim that space with a full MOLLE grid, giving you a fixed, repeatable mounting surface for pouches, med kits, tools, and flashlights. Because the panel follows the window contour rather than projecting inward, the cargo area floor plan stays intact. The panels add attachment points without reducing room for gear, dogs, or passengers.\u003c\/p\u003e\n\n\u003ch2\u003eA Pattern That Works With What You Already Own\u003c\/h2\u003e\n\u003cp\u003eThe standard MOLLE pattern on these panels is compatible with a wide range of MOLLE-compatible pouches, straps, and attachment systems. If you already run MOLLE gear in other parts of your vehicle, the same accessories transfer directly. The system is also expandable: the Rago Fabrication add-on shelf (Part# AC8503001NA) mounts to the panels to create a flat storage platform, and Quick Fist clamps (Part# R0000MSPQUICK) can be added to secure round or irregular items. Both are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eFinished to Last in an Interior Environment\u003c\/h2\u003e\n\u003cp\u003eThe panels are finished in hammer black powder coat, a textured coating that resists scratching and blends with the Forester's dark interior trim. Laser-cut steel construction means the MOLLE slots are consistent and precise, so attachment hardware seats and releases cleanly rather than binding or rattling over rough terrain.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold as a pair:\u003c\/strong\u003e includes driver side and passenger side panels\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLaser-cut steel construction:\u003c\/strong\u003e consistent MOLLE slot geometry throughout\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWindow-contour forming:\u003c\/strong\u003e maximizes mounting surface without reducing cargo floor space\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard MOLLE pattern:\u003c\/strong\u003e compatible with a variety of MOLLE attachment systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHammer black powder coat finish:\u003c\/strong\u003e textured, durable, blends with interior trim\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExpandable system:\u003c\/strong\u003e compatible with Rago Fabrication shelf (AC8503001NA) and Quick Fist clamps (R0000MSPQUICK), both sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2019–2024 Subaru Forester\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eQuantity\u003c\/td\u003e\n      \u003ctd\u003e2 panels (driver side and passenger side)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eLaser-cut steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eHammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e16 lb (pair)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eRequires drilling and riv-nut installation\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC8502801NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese panels suit 2019–2024 Subaru Forester owners who want to add organized, fixed MOLLE storage to the rear compartment without sacrificing cargo floor space. They work well for overlanding builds, emergency preparedness setups, and anyone who already runs MOLLE-compatible pouches or gear organizers.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese panels do not fit Forester model years outside 2019–2024. Installation requires drilling and riv-nut work. These panels are not a no-drill or adhesive-mount solution. The add-on shelf system (Part# AC8503001NA) and Quick Fist clamps (Part# R0000MSPQUICK) are not included and must be purchased separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eAre both driver and passenger side panels included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication Rear Window MOLLE Storage Panels ship as a pair (one driver side panel and one passenger side panel), so both rear compartment windows are covered in a single purchase.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does installation require?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eInstalling these MOLLE panels requires drilling and riv-nut installation. This is not a clip-in or adhesive-mount system. An install guide is available from Rago Fabrication; professional installation is an option if you are not comfortable with the process.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat MOLLE accessories are compatible with these panels?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe panels use a standard MOLLE pattern that is compatible with a variety of MOLLE attachment systems, including pouches, med kits, tool rolls, and strap-mount accessories. Any MOLLE-compatible gear you already own should work with the grid on these panels.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan I add a shelf to these panels later?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication add-on shelf system (Part# AC8503001NA) is designed to mount to these rear window MOLLE panels and adds a flat storage platform to the setup. Quick Fist clamps (Part# R0000MSPQUICK) can also be added for securing round or irregular items. Both accessories are sold separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo these panels fit all Subaru Forester years?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThese rear window MOLLE panels are designed specifically for the 2019–2024 Subaru Forester. They are not confirmed to fit earlier or later Forester generations, and fitment should not be assumed outside that model year range.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621691658310,"sku":"AC8502801NA","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2019-2024-Subaru-Forester-SK-Rear-Window-Molle-Panels-Render-sq.jpg?v=1791936572"},{"product_id":"rago-fabrication-subaru-forester-molle-panel-storage-shelf","title":"Rago Fabrication Subaru Forester MOLLE Panel Storage Shelf","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Subaru Forester MOLLE Panel Storage Shelf is a flat cargo platform designed for 2019–2024 Subaru Forester (SK) owners who want organized, accessible storage across the upper rear cargo area. The shelf mounts directly to Rago's Rear Window MOLLE Panels (PN# AC8502801NA, sold separately) and features a standard MOLLE pattern on both the top and bottom surfaces, so pouches, med kits, and gear can be attached from either side.\u003c\/p\u003e\n\n\u003ch2\u003eA Platform That Works With Your Cargo Area, Not Against It\u003c\/h2\u003e\n\u003cp\u003eAdding a flat shelf to the upper cargo area of a Forester creates a second tier of usable space without blocking the load floor below. Because the Rago Fabrication shelf is compatible with the factory retractable rear cargo cover, owners do not have to choose between an organized cargo setup and the privacy and weather protection the OE cover provides. The shelf sits above the cover's travel path, so both can be used together without modification.\u003c\/p\u003e\n\n\u003ch2\u003eMOLLE Access From Both Sides\u003c\/h2\u003e\n\u003cp\u003eThe shelf carries Rago's standard MOLLE pattern on both the top and bottom surfaces. Top-side attachment is useful for items that need to stay flat and accessible: med kits, document pouches, or pet essentials. Bottom-side attachment lets gear hang into the cargo area without consuming floor space. Because the pattern is standard MOLLE, it is compatible with a wide range of aftermarket pouches and attachment systems already in most overlanders' kits.\u003c\/p\u003e\n\n\u003ch2\u003eAdjustable Height, Expandable Setup\u003c\/h2\u003e\n\u003cp\u003eMultiple mounting positions allow the shelf height to be set where it works best for a given load-out, whether that means maximizing clearance below for taller cargo or raising the platform to suit a specific pouch depth. The shelf is also expandable with Rago Fabrication Quick Fist mounts (PN# R0000MSPQUICK, sold separately), which add clamping points for handled gear such as flashlights, recovery tools, and similar items.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-surface MOLLE pattern:\u003c\/strong\u003e standard MOLLE webbing on both top and bottom surfaces for flexible attachment from either side\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMultiple mounting positions:\u003c\/strong\u003e adjustable height to suit different cargo configurations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOE cargo cover compatible:\u003c\/strong\u003e works alongside the factory retractable rear cargo cover without modification\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuick Fist expandable:\u003c\/strong\u003e accepts Rago Fabrication Quick Fist mounts (PN# R0000MSPQUICK, sold separately) for securing handled tools and gear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHammer black powder coat finish:\u003c\/strong\u003e textured black coating for durability and appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFitment\u003c\/td\u003e\n      \u003ctd\u003e2019–2024 Subaru Forester (SK)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eHammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting requirement\u003c\/td\u003e\n      \u003ctd\u003eRequires Rago Fabrication Rear Window MOLLE Panels, PN# AC8502801NA (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOE cargo cover compatibility\u003c\/td\u003e\n      \u003ctd\u003eCompatible with factory retractable rear cargo cover\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC8503001NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis shelf suits 2019–2024 Subaru Forester (SK) owners who have installed Rago Fabrication's Rear Window MOLLE Panels (PN# AC8502801NA) or plan to, and want to add a flat, MOLLE-compatible storage platform to the upper cargo area for pouches, med kits, camping gear, pet essentials, or tools.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe shelf does not mount to the vehicle on its own. Installation requires the Rago Fabrication Rear Window MOLLE Panels (PN# AC8502801NA), which are sold separately. It is not compatible with Forester generations outside the 2019–2024 SK body style, and Quick Fist mounts for securing handled gear are also sold separately (PN# R0000MSPQUICK).\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this shelf mount directly to the Forester, or does it require other Rago parts?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Forester MOLLE Panel Storage Shelf does not mount directly to the vehicle. Installation requires Rago Fabrication's Rear Window MOLLE Panels (PN# AC8502801NA), which are sold separately. The shelf attaches to those panels and spans the upper cargo area of the 2019–2024 Subaru Forester (SK).\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill the shelf interfere with the factory retractable rear cargo cover?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Forester MOLLE Panel Storage Shelf is compatible with the factory retractable rear cargo cover. The shelf mounts in the upper cargo area in a position that allows the OE cover to operate normally, so owners can use both without removing either.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan I attach gear to the underside of the shelf, or only the top?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Forester MOLLE Panel Storage Shelf features a standard MOLLE pattern on both the top and bottom surfaces. Pouches, med kits, and other MOLLE-compatible accessories can be attached from either side, allowing gear to hang into the cargo area below or sit flat on top of the platform.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan I adjust the height of the shelf?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication Forester MOLLE Panel Storage Shelf offers multiple mounting positions, allowing the height to be set to suit different cargo configurations, whether to maximize clearance below for taller items or to position the platform at a depth that works best for a specific pouch or kit.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow do I secure flashlights or tools with handles to the shelf?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Forester MOLLE Panel Storage Shelf is expandable with Rago Fabrication Quick Fist mounts (PN# R0000MSPQUICK), which add clamping points for handled gear such as flashlights and recovery tools. Quick Fist mounts are sold separately.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621692248134,"sku":"AC8503001NA","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2019-2024-Subaru-Forester-SK-Rear-Molle-Shelf-Render-2-sq.jpg?v=1791936628"},{"product_id":"rago-fabrication-7075-t6-billet-aluminum-winch-fairlead","title":"Rago Fabrication 7075-T6 Billet Aluminum Winch Fairlead","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Winch Fairlead is CNC-machined from 7075-T6 billet aluminum and built around a patented interlocking mechanism that locks a recovery hook in place under load. Independent third-party testing rates the Open Hook configuration to 20,000 lbs and the Closed Hook configuration to 30,000 lbs. Both configurations are designed for use with synthetic winch rope only and are available as separate variants.\u003c\/p\u003e\n\n\u003ch2\u003eMachined, Not Cast\u003c\/h2\u003e\n\u003cp\u003eCNC machining removes material from solid 7075-T6 billet aluminum rather than pouring molten metal into a mold. That process produces tighter dimensional tolerances and a denser grain structure throughout the part, qualities that matter when a fairlead is absorbing shock loads during a recovery. The low-profile, compact form keeps forward projection to a minimum while preserving maximum material thickness at the highest-stress points.\u003c\/p\u003e\n\n\u003ch2\u003eA Hook That Stays Put\u003c\/h2\u003e\n\u003cp\u003eThe patented interlocking design mechanically captures a recovery hook rather than relying on friction or gravity alone. Under the dynamic loads of a winch pull (direction changes, slack-and-tension cycles, uneven terrain) the hook remains positively retained. This reduces the risk of the hook walking out of the fairlead mid-recovery, which can redirect rope load unpredictably.\u003c\/p\u003e\n\n\u003ch2\u003eFinish Built for Trail Conditions\u003c\/h2\u003e\n\u003cp\u003eThe hard black anodized finish is built up with a custom-baked top coating and laser-etched detailing. Hard anodizing converts the aluminum surface into aluminum oxide, which resists abrasion, trail dust, and UV degradation more effectively than paint or standard anodizing. The laser-etched detailing is recessed into the surface rather than applied on top, so it does not peel or fade. Mounting hardware is color-matched black stainless steel, included.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e CNC-machined 7075-T6 billet aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePatented interlocking mechanism:\u003c\/strong\u003e mechanically retains the recovery hook under load\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad ratings:\u003c\/strong\u003e Open Hook rated to 20,000 lbs; Closed Hook rated to 30,000 lbs, each independently third-party tested\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e hard black anodized with custom-baked top coating and laser-etched detailing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e color-matched black stainless steel hardware included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRope compatibility:\u003c\/strong\u003e synthetic winch rope only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eOpen Hook\u003c\/th\u003e\n      \u003cth\u003eClosed Hook\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd colspan=\"2\"\u003e7075-T6 billet aluminum (CNC-machined)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd colspan=\"2\"\u003eHard black anodized, custom-baked top coating, laser-etched detailing\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLoad Rating\u003c\/td\u003e\n      \u003ctd\u003e20,000 lbs\u003c\/td\u003e\n      \u003ctd\u003e30,000 lbs\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTesting\u003c\/td\u003e\n      \u003ctd colspan=\"2\"\u003eIndependently verified by third-party lab\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHardware Included\u003c\/td\u003e\n      \u003ctd colspan=\"2\"\u003eColor-matched black stainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRope Compatibility\u003c\/td\u003e\n      \u003ctd colspan=\"2\"\u003eSynthetic winch rope only\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC9910490NA\u003c\/td\u003e\n      \u003ctd\u003eAC9910390NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Rago Winch Fairlead suits overlanders and off-road recovery builds running synthetic winch rope on common winch setups. The Open Hook is independently verified to 20,000 lbs and the Closed Hook to 30,000 lbs, making either configuration appropriate for serious recovery use where hook retention under dynamic load matters.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Rago Winch Fairlead is not compatible with wire or steel cable winch rope; it is designed for synthetic rope only. No specific winch brand mounting dimensions are confirmed in available product data, so buyers should verify bolt-pattern compatibility with their winch before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between the Open Hook and Closed Hook configurations?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Winch Fairlead Open Hook is independently rated to 20,000 lbs and the Closed Hook is independently rated to 30,000 lbs. Both use the same patented interlocking mechanism and 7075-T6 billet aluminum construction; the hook geometry differs, which affects how the recovery hook is captured and what load the assembly is rated to sustain.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill this fairlead work with wire or steel cable winch rope?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Winch Fairlead is designed for synthetic winch rope only. It is not rated or intended for use with wire or steel cable rope. Buyers running steel cable should not use this fairlead.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat mounting hardware is included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Winch Fairlead ships with color-matched black stainless steel mounting hardware. No additional hardware purchases are required for the fairlead itself, though buyers should confirm their winch's mounting hole pattern matches before ordering.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow was the load rating verified?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eBoth configurations of the Rago Winch Fairlead have been independently tested and verified by a third-party laboratory under extreme load conditions: the Open Hook is rated to 20,000 lbs and the Closed Hook to 30,000 lbs.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow durable is the finish in trail and weather conditions?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Winch Fairlead carries a hard black anodized finish with a custom-baked top coating and laser-etched detailing. Hard anodizing converts the aluminum surface into aluminum oxide, which resists abrasion, UV exposure, and trail dust. The laser-etched markings are recessed into the surface and do not peel or fade the way applied coatings can.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Closed","offer_id":50621696049222,"sku":"AC9910390NA","price":249.99,"currency_code":"USD","in_stock":true},{"title":"Open","offer_id":50621696081990,"sku":"AC9910490NA","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/Rago-Winch-Fairlead-Closed-Hook-6-sq.jpg?v=1791936701"},{"product_id":"rago-fabrication-2024-lexus-gx-550-center-mount-rear-bumper","title":"Rago Fabrication 2024+ Lexus GX 550 Center Mount Rear Bumper","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Center Mount Rear Bumper is a steel, hammer-black powder-coated rear bumper engineered for the 2024 and newer Lexus GX 550 across all trim levels. It retains the factory parking sensors, blind spot monitoring sensors, and OEM hitch receiver, and adds integrated side light mounts for two Baja Designs S2 or two Rigid Industries SRM lights. Some trimming of factory components is required during installation. Made in America.\u003c\/p\u003e\n\n\u003ch2\u003eNo Compromises on Factory Safety Systems\u003c\/h2\u003e\n\u003cp\u003eReplacing a rear bumper on a modern luxury SUV often means losing active safety features that are built into the factory fascia. The Rago Fabrication bumper is designed around the GX 550's OEM sensor layout, keeping the parking sensors and blind spot monitoring sensors in their factory positions. Buyers retain the full function of those systems without dealer reprogramming or aftermarket sensor relocation kits. The factory hitch receiver also carries over, so towing capacity and trailer wiring connections are unaffected.\u003c\/p\u003e\n\n\u003ch2\u003eIntegrated Light Mounts, Ready to Wire\u003c\/h2\u003e\n\u003cp\u003eThe bumper includes integrated mounts in the sides for two Baja Designs S2 lights or two Rigid Industries SRM lights, positioned for rear illumination during nighttime trail use, camp setups, or vehicle recovery. Because the mount positions are built into the bumper structure rather than bolted on afterward, the result is a cleaner install with no additional fabrication. Lights are not included and are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eSteel Construction with a Low-Profile, OEM-Inspired Profile\u003c\/h2\u003e\n\u003cp\u003eThe bumper is built from heavy-duty steel and finished in a dual-stage hammer black powder coat chosen to complement the GX 550's factory styling rather than visually dominate it. The center-mount design keeps the overall profile close to the roofline and body lines of the stock bumper, so the upgrade reads as purposeful rather than aggressive. Rago Fabrication builds this bumper in America, and fitment is engineered specifically for the 2024+ GX 550 platform rather than adapted from a universal template.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Sensor Retention:\u003c\/strong\u003e retains factory parking sensors and blind spot monitoring sensors in their stock positions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory Hitch Compatibility:\u003c\/strong\u003e preserves the OEM hitch receiver without modification\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated Light Mounts:\u003c\/strong\u003e side mounts sized for two Baja Designs S2 or two Rigid Industries SRM lights\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSteel Construction:\u003c\/strong\u003e heavy-duty steel with dual-stage hammer black powder coat finish\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAll-Trim Fitment:\u003c\/strong\u003e engineered for all 2024+ Lexus GX 550 trim levels\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in America:\u003c\/strong\u003e manufactured by Rago Fabrication in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2024+ Lexus GX 550, all trim levels\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMount Style\u003c\/td\u003e\n      \u003ctd\u003eCenter mount\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eHeavy-duty steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eDual-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Lights\u003c\/td\u003e\n      \u003ctd\u003eTwo Baja Designs S2 or two Rigid Industries SRM (lights not included)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOEM Systems Retained\u003c\/td\u003e\n      \u003ctd\u003eParking sensors, blind spot monitoring sensors, factory hitch receiver\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eMade in America\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eR840255090103\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis bumper suits 2024 and newer Lexus GX 550 owners who want to add off-road durability and rear lighting capability without giving up factory parking sensors, blind spot monitoring, or the OEM hitch receiver. It works across all GX 550 trim levels and is a strong fit for overlanding builds where a low-profile, OEM-compatible look is the goal.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis bumper does not fit the GX 460 or any pre-2024 GX model. Installation requires some trimming of factory components and is not a tool-free, drop-in replacement. Baja Designs S2 and Rigid Industries SRM lights are not included. This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill this bumper work with the factory parking sensors and blind spot monitoring on the GX 550?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication Center Mount Rear Bumper for the 2024+ Lexus GX 550 is designed to retain the OEM parking sensors and blind spot monitoring sensors in their factory positions, so both systems continue to function without relocation or reprogramming.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat lights fit the integrated mounts on this bumper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe integrated side light mounts on this rear bumper are sized for two Baja Designs S2 lights or two Rigid Industries SRM lights. Lights are not included with the bumper and are sold separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this bumper keep the factory hitch receiver?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication GX 550 rear bumper is designed to retain the OEM hitch receiver, so towing connections and trailer wiring remain intact without modification to the hitch assembly.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes installation require cutting or trimming the vehicle?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eSome trimming of factory components is required to install this rear bumper on the 2024+ Lexus GX 550. The bumper is engineered for precise fitment across all trim levels, but the installation is not a tool-free, drop-in swap. Rago Fabrication provides an install guide for this product.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the finish on this bumper, and how is it applied?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication GX 550 rear bumper is finished in a dual-stage hammer black powder coat. This two-stage process is applied over the steel construction to provide a durable, corrosion-resistant surface that complements the GX 550's factory exterior styling.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621696475206,"sku":"R840255090103","price":1149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/GX-550-Rear-Bumper-Render-sq.jpg?v=1791936721"},{"product_id":"rago-fabrication-2025-toyota-4runner-full-width-winch-front-bumper","title":"Rago Fabrication 2025+ Toyota 4Runner Full-Width Winch Front Bumper","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Full-Width Winch Front Bumper is a direct-fit front bumper for the 2025 and newer (6th generation) Toyota 4Runner, built to add recovery capability and trail-ready protection while retaining Toyota Safety Sense, OEM parking sensors, and all factory drive assist features. It ships at 161 lb and is manufactured in Chandler, Arizona. This bumper fits standard 4Runner trims; TRD Pro and Trailhunter trims require a separate version.\u003c\/p\u003e\n\n\u003ch2\u003eRecovery-Ready from the Start\u003c\/h2\u003e\n\u003cp\u003eThe Rago Fabrication 4Runner Full-Width Winch Bumper includes a heavy-duty concealed winch mount and two integrated 1-inch thick CNC-machined D-ring clevis mounts sized for 3\/4-inch D-rings. Having a dedicated winch mount and clevis points built into the bumper structure means recovery hardware is always in position, with no add-on plates to source, align, or torque separately before a trip. The concealed mount keeps the winch tucked behind the bumper face, protecting it from debris and preserving the bumper's clean profile.\u003c\/p\u003e\n\n\u003ch2\u003eClearance and Visibility for Technical Terrain\u003c\/h2\u003e\n\u003cp\u003eHigh-clearance sides open the wheel well to accommodate oversized tires and maximize approach angles at the front axle. On technical terrain where tire contact and approach angle determine whether a line is drivable, the extra clearance removes a constraint that a full-width factory bumper would otherwise impose. The integrated center light mount accepts one universal 30-inch dual-row LED light bar, placing supplemental lighting at bumper height where it illuminates the trail surface directly ahead. The light bar is sold separately and not included with the bumper.\u003c\/p\u003e\n\n\u003ch2\u003eOEM Technology Stays Intact\u003c\/h2\u003e\n\u003cp\u003eThe 4Runner Full-Width Winch Bumper is designed to retain full functionality of Toyota Safety Sense, OEM parking sensors, and all factory drive assist features. Aftermarket bumpers that block or relocate sensor arrays can disable pre-collision warnings, lane departure alerts, and adaptive cruise control. This bumper's fitment geometry preserves those systems so daily-driver capability is not traded away for trail protection. The finish is a durable two-stage hammer black powder coat applied over the steel structure.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConcealed winch mount:\u003c\/strong\u003e heavy-duty integrated mount hidden behind the bumper face\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eD-ring clevis mounts:\u003c\/strong\u003e two 1-inch thick CNC-machined mounts accepting 3\/4-inch D-rings for recovery rigging\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e30-inch light bar mount:\u003c\/strong\u003e integrated center mount for one universal 30-inch dual-row LED light bar (light bar sold separately)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-clearance sides:\u003c\/strong\u003e open wheel-well design supports oversized tires and maximizes front approach angle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTSS and sensor retention:\u003c\/strong\u003e retains Toyota Safety Sense, OEM parking sensors, and all factory drive assist features\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo-stage hammer black powder coat:\u003c\/strong\u003e durable finish applied at the Chandler, Arizona facility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2025+ Toyota 4Runner (6th generation), standard trims. TRD Pro and Trailhunter trims require a separate version.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShipping Weight\u003c\/td\u003e\n      \u003ctd\u003e161 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eD-Ring Clevis Mounts\u003c\/td\u003e\n      \u003ctd\u003eTwo integrated, 1-inch thick CNC-machined, accepts 3\/4-inch D-rings\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLight Bar Mount\u003c\/td\u003e\n      \u003ctd\u003eCenter mount for one universal 30-inch dual-row LED light bar\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOptional Skid Plate\u003c\/td\u003e\n      \u003ctd\u003e3\/16-inch aluminum, sold separately (part AC7111203NA)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eTwo-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOrigin\u003c\/td\u003e\n      \u003ctd\u003eMade in USA (Chandler, Arizona)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eF7105031601NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis bumper suits 2025 and newer Toyota 4Runner owners on standard trims who wheel regularly and want a recovery-ready front end with an integrated winch mount, D-ring clevis points, and a light bar position, without giving up Toyota Safety Sense or OEM parking sensors for daily driving.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis bumper does not fit 2025+ 4Runner TRD Pro or Trailhunter trims, which require a separate Rago Fabrication version. The winch, 30-inch LED light bar, D-rings, and skid plate are not included; the optional aluminum skid plate is sold separately as part AC7111203NA. Installation requires trimming, riv-nut installation, and two people.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich 4Runner years and trims does this bumper fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThis Rago Fabrication Full-Width Winch Front Bumper fits 2025 and newer Toyota 4Runner in standard trims (6th generation). TRD Pro and Trailhunter trims are not compatible with this version. Rago Fabrication offers a separate bumper for those trims.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs a winch included, and what size winch will fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe bumper includes a heavy-duty concealed winch mount, but no winch is included. Winch mount capacity and maximum pull rating are not published for this bumper; confirm winch dimensions against the mount before purchasing a winch separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat recovery hardware is included with the bumper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication 4Runner Full-Width Winch Bumper includes two integrated 1-inch thick CNC-machined D-ring clevis mounts that accept 3\/4-inch D-rings. D-rings themselves are not included and must be sourced separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this bumper retain Toyota Safety Sense and OEM parking sensors?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication Full-Width Winch Front Bumper is designed to retain full functionality of Toyota Safety Sense, OEM parking sensors, and all factory drive assist features on the 2025+ 4Runner.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does installation require?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eInstalling this bumper requires trimming and riv-nut installation in addition to direct-fit mounting with the supplied hardware. Rago Fabrication recommends two people for the installation. An install guide is available from the product page.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs the skid plate included, and what is it made of?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe skid plate is not included. An optional heavy-duty 3\/16-inch aluminum skid plate (part AC7111203NA) is available as a separate add-on purchase for additional underbody protection beneath this bumper.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621702242374,"sku":"F7105031601NA","price":1699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/Rago-Full-Width-4runner-front-bumper-sq_b0a4932f-5d26-46d4-80ad-dc421ee7134f.jpg?v=1791936866"},{"product_id":"rago-fabrication-rear-hatch-ladder-for-toyota-4runner-2010-2024","title":"Rago Fabrication Rear Hatch Ladder for Toyota 4Runner 2010-2024","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Rear Hatch Ladder is a hatch-mounted step system built for 2010-2024 Toyota 4Runner owners who regularly access a roof rack, rooftop tent, or gear stored on the roof. Double-wall aluminum side rails pair with steel mounting components for a secure attachment to the rear hatch, while extruded aluminum steps with integrated rubber traction pads deliver confident footing on wet, dusty, or uneven terrain. One configuration covers all 5th Gen 4Runner model years from 2010 through 2024.\u003c\/p\u003e\n\n\u003ch2\u003eAluminum Construction, Steel-Backed Mounting\u003c\/h2\u003e\n\u003cp\u003eThe Rear Hatch Ladder uses double-wall aluminum side rails to balance structural rigidity with weight efficiency. At 18 lb, the ladder adds meaningful roof-access capability without loading the hatch unnecessarily. Steel mounting components handle the attachment points where stress concentrates, keeping the ladder secure whether the vehicle is parked on a slope or returning from a rough trail. The hammer black powder coat finish resists corrosion across seasons of outdoor exposure, and brushed aluminum accents give the ladder a purposeful, purpose-built appearance.\u003c\/p\u003e\n\n\u003ch2\u003eFull-Length Accessory Rail\u003c\/h2\u003e\n\u003cp\u003eAccessory mounting points run the entire length of each side rail, not just at fixed intervals. That continuous track lets owners position trail tools, recovery gear, or lighting accessories where they make sense for a specific build rather than where a fixed bracket happens to land. The Rear Hatch Ladder is designed to integrate with Rago Fabrication roof racks, so the accessory rail aligns with the rack's mounting geometry when both are installed together.\u003c\/p\u003e\n\n\u003ch2\u003eGrip Where It Counts\u003c\/h2\u003e\n\u003cp\u003eExtruded aluminum steps provide a consistent, flat surface underfoot, and each step carries integrated rubber traction pads that maintain grip when steps are wet, muddy, or coated in trail dust. That combination matters most during the moments when safe roof access is least convenient: unloading camp gear in the rain, reaching a rooftop tent in the dark, or recovering equipment after a dusty run. The traction pads are part of the step construction, not adhesive strips that can peel away with repeated use.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble-wall aluminum side rails:\u003c\/strong\u003e structural rigidity with a lightweight 18 lb total weight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSteel mounting components:\u003c\/strong\u003e secure hatch attachment at high-stress connection points\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtruded aluminum steps with integrated rubber traction pads:\u003c\/strong\u003e confident footing in wet, dusty, or off-road conditions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull-length accessory mounting points:\u003c\/strong\u003e continuous track along each side rail for positioning trail gear or accessories\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHammer black powder coat with brushed aluminum accents:\u003c\/strong\u003e corrosion-resistant finish for daily and trail use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2010-2024 Toyota 4Runner (5th Gen)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSide Rail Material\u003c\/td\u003e\n      \u003ctd\u003eDouble-wall aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting Components\u003c\/td\u003e\n      \u003ctd\u003eSteel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStep Material\u003c\/td\u003e\n      \u003ctd\u003eExtruded aluminum with integrated rubber traction pads\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eHammer black powder coat with brushed aluminum accents\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e18 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC6610201NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Rago Fabrication Rear Hatch Ladder suits 2010-2024 Toyota 4Runner owners who have installed or plan to install a roof rack, rooftop tent, or overhead storage and need a reliable, repeatable way to reach the roof on pavement, at a trailhead, or in camp.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis ladder is designed exclusively for the 5th Gen Toyota 4Runner (2010-2024) and does not fit other vehicle makes, models, or 4Runner generations. A roof rack and crossbars are not included and must be purchased separately.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich 4Runner years and generations does this ladder fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Rear Hatch Ladder is designed for the 2010-2024 Toyota 4Runner, covering the full 5th Gen production run. It does not fit earlier 4Runner generations or other Toyota models. One configuration covers all 5th Gen model years, so no year-specific variant selection is needed.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the ladder made of?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rear Hatch Ladder uses double-wall aluminum side rails, extruded aluminum steps with integrated rubber traction pads, and steel mounting components at the hatch attachment points. The finish is a hammer black powder coat with brushed aluminum accents for long-term corrosion resistance.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes the ladder come with a roof rack?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Rear Hatch Ladder does not include a roof rack or crossbars. The ladder is designed to pair with Rago Fabrication roof racks, but those are separate products sold independently. The ladder functions as a standalone hatch-mounted step system.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow does the ladder attach to the 4Runner?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rear Hatch Ladder mounts to the 4Runner's rear hatch using steel mounting components integrated into the ladder's construction. For hardware details, torque specifications, and step-by-step instructions, consult the Rago Fabrication install guide before beginning installation.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill the ladder hold up in wet or muddy conditions?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach step on the Rear Hatch Ladder carries integrated rubber traction pads designed to maintain grip when steps are wet, dusty, or muddy. The hammer black powder coat finish provides corrosion resistance for extended outdoor exposure. The traction pads are part of the step construction, not adhesive-applied strips that can degrade with repeated use.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621702668358,"sku":"AC6610201NA","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/5th-Gen-4Runner-Hatch-Ladder-sq.jpg?v=1791936911"},{"product_id":"rago-fabrication-land-cruiser-gx-550-overland-crossbars","title":"Rago Fabrication Land Cruiser GX 550 Overland Crossbars","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Overland Crossbars are a set of five steel crossbars that mount to the factory roof rails on 2024 and newer Toyota Land Cruiser and Lexus GX 550 models, adding a structured platform for lights, storage boxes, rooftop tents, recovery gear, and RotoPAX fuel and water containers without replacing the OEM rails. Mounting requires drilling and riv-nut installation into the factory roof rails.\u003c\/p\u003e\n\n\u003ch2\u003eBuild Out Your Roof Without Buying a Full Rack\u003c\/h2\u003e\n\u003cp\u003eFor Land Cruiser and GX 550 owners who already have factory roof rails, the Rago Fabrication Overland Crossbars let a roof build begin without committing to a complete rack system. The five crossbars span the existing rails and immediately open up mounting real estate for the accessories that matter most on a given trip: lights for night navigation, a rooftop tent for base camp, or tie-down rings for strapping down cargo. That modularity means the setup can grow incrementally as needs and budget allow, rather than requiring a single large purchase up front.\u003c\/p\u003e\n\n\u003ch2\u003eOne-Piece Rails for Consistent Weight Distribution\u003c\/h2\u003e\n\u003cp\u003eEach crossbar uses a one-piece construction that spreads load evenly across its span rather than concentrating stress at a single attachment point. On rough terrain, where gear shifts and dynamic loads spike well above static weight, consistent distribution reduces the risk of localized flex or fatigue at the mounting points. The result is a platform that stays rigid and predictable whether the vehicle is crawling a rocky trail or running a highway at speed.\u003c\/p\u003e\n\n\u003ch2\u003eLow Profile That Works With the Vehicle's Lines\u003c\/h2\u003e\n\u003cp\u003eThe crossbars sit close to the roofline, which limits the frontal area added above the vehicle and reduces the wind resistance penalty that taller rack systems introduce. Beyond aerodynamics, the low-profile stance preserves the proportions of the Land Cruiser and GX 550 rather than stacking a visually heavy structure above them. The 2-stage hammer black powder coat finish is durable against trail debris and weather, and its texture reads as a deliberate part of the exterior rather than an afterthought.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal mounting pattern:\u003c\/strong\u003e compatible with Rago Fabrication lights, storage boxes, rooftop tents, Quick Fists, and Universal Accessory Mounts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated RotoPAX provisions:\u003c\/strong\u003e dedicated mounting points for RotoPAX fuel and water containers\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eL-track compatible:\u003c\/strong\u003e accepts L-track tie-down rings for securing cargo\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExpandable with Rago E-MSPs:\u003c\/strong\u003e crossbars accept Rago External MOLLE Storage Panels for additional mounting surface\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOne-piece crossbar design:\u003c\/strong\u003e promotes even weight distribution across the full span\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2-stage hammer black powder coat:\u003c\/strong\u003e durable steel construction with a resilient textured finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eSteel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003e2-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eQuantity\u003c\/td\u003e\n      \u003ctd\u003eSet of 5 crossbars\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e54 lb (set)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2024+ Toyota Land Cruiser \/ Lexus GX 550\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting\u003c\/td\u003e\n      \u003ctd\u003eFactory OEM roof rails; drilling and riv-nut installation into roof rails required\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese crossbars suit 2024 and newer Toyota Land Cruiser and Lexus GX 550 owners who want to expand roof-mounted storage and accessory capacity using the factory roof rails as a foundation, without purchasing a complete aftermarket roof rack. They work well for overlanders and campers building out a modular roof system incrementally with Rago Fabrication accessories.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese crossbars do not fit vehicles other than the 2024+ Toyota Land Cruiser and Lexus GX 550. Drilling and riv-nut installation into the factory roof rails is required; this is not a clamp-on or tool-free mount. No load rating is published for this product; buyers with specific weight-capacity requirements should confirm with Rago Fabrication before purchasing.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat vehicles do these crossbars fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Overland Crossbars are designed for 2024 and newer Toyota Land Cruiser and Lexus GX 550 models equipped with factory OEM roof rails. No fitment data is available for earlier Land Cruiser generations, other Toyota models, or other makes.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat installation is required to mount these crossbars?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eInstalling the Rago Fabrication Overland Crossbars requires drilling into the factory roof rails and installing riv-nuts to create threaded mounting points. This is not a clamp-on or tool-free installation; buyers should be comfortable with drilling into the OEM rails or plan to have the work done by a qualified installer.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat accessories are compatible with these crossbars?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe crossbars feature a universal mounting pattern compatible with Rago Fabrication lights, storage boxes, rooftop tents, Quick Fists, and Universal Accessory Mounts. They also include integrated RotoPAX provisions for fuel and water containers, accept L-track tie-down rings for cargo, and can be expanded with Rago External MOLLE Storage Panels.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow many crossbars are included, and what is the finish?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Overland Crossbars are sold as a complete set of five crossbars. Each crossbar is made from steel and finished in a 2-stage hammer black powder coat for durability against trail debris and weather exposure.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621705158726,"sku":"AC7709501NA","price":389.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/GX-550-and-LC-250-Crossmembers-Main-sq.jpg?v=1791937017"},{"product_id":"rago-fabrication-front-bumper-skid-plate-for-2025-toyota-4runner","title":"Rago Fabrication Front Bumper Skid Plate for 2025+ Toyota 4Runner","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Front Bumper Skid Plate is a bolt-on armor panel for the 6th Generation Toyota 4Runner (2025 and newer), designed specifically as a companion piece to the Rago Full-Width Winch Front Bumper (F7105031601NA). Built from 3\/16-inch aluminum with a satin black powder coat finish, it shields the front end of the truck from rock strikes, ruts, and trail debris that reach underneath the bumper.\u003c\/p\u003e\n\n\u003ch2\u003eFront-End Protection Where the Trail Hits First\u003c\/h2\u003e\n\u003cp\u003eThe underside of a front bumper is one of the first surfaces to contact rocks, ledges, and compacted trail debris on technical terrain. The Rago Front Bumper Skid Plate positions a solid aluminum barrier across that exposure zone, giving the 6th Gen 4Runner's front end a deflection surface that absorbs and redirects impacts before they reach brake lines, steering components, or the bumper structure itself. That protection is most meaningful on slow, deliberate rock crawls where the truck's weight is fully loaded onto the obstacle.\u003c\/p\u003e\n\n\u003ch2\u003eAluminum Construction Keeps Weight in Check\u003c\/h2\u003e\n\u003cp\u003eAt 3\/16-inch wall thickness, the aluminum used here provides meaningful rigidity against trail impacts without the weight penalty of steel. For a truck already carrying recovery gear, fuel, and camp equipment, keeping added armor weight low preserves approach-angle clearance and reduces unsprung mass at the front axle. The material also resists the surface corrosion that bare steel develops after repeated exposure to mud, water, and road salt. That resistance is a practical advantage for trucks that see both trail use and daily driving.\u003c\/p\u003e\n\n\u003ch2\u003eFinish Built for Long-Term Trail Use\u003c\/h2\u003e\n\u003cp\u003eThe satin black powder coat applied to the skid plate provides a hard, abrasion-resistant surface that holds up to the scuffing and scraping that comes with regular off-road use. The finish also matches the appearance of the Rago Full-Width Winch Front Bumper it mounts to, keeping the front end visually consistent rather than mismatched between components.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3\/16-inch aluminum construction:\u003c\/strong\u003e provides a balance of impact resistance and reduced weight compared to steel alternatives\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSatin black powder coat finish:\u003c\/strong\u003e abrasion-resistant coating that resists corrosion and complements the Rago Full-Width Winch Front Bumper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect add-on fitment:\u003c\/strong\u003e designed specifically for use with the Rago Full-Width Winch Front Bumper (F7105031601NA) on the 6th Gen 4Runner\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTrail impact deflection:\u003c\/strong\u003e shields front-end components from rocks, ruts, and debris encountered on technical terrain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003e3\/16-inch aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eSatin black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Bumper\u003c\/td\u003e\n      \u003ctd\u003eRago Full-Width Winch Front Bumper (F7105031601NA)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2025+ Toyota 4Runner (6th Generation)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis skid plate suits 6th Generation Toyota 4Runner owners (2025 and newer) who have already installed or are purchasing the Rago Full-Width Winch Front Bumper and want to add underside protection for technical off-road use, rock crawling, or trail driving where front-end contact with obstacles is likely.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis skid plate does not fit any Toyota 4Runner generation prior to 2025, and it is not compatible with any bumper other than the Rago Full-Width Winch Front Bumper (F7105031601NA). It is not a standalone front skid plate for the factory bumper or for third-party bumpers.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich bumper is this skid plate designed to work with?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Front Bumper Skid Plate is designed exclusively as a direct add-on for the Rago Full-Width Winch Front Bumper, part number F7105031601NA. It is engineered to mount to that specific bumper on the 2025 and newer Toyota 4Runner and is not designed to fit any other bumper configuration.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat generation of 4Runner does this fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThis skid plate fits the 6th Generation Toyota 4Runner, model year 2025 and newer. It does not fit 5th Generation or earlier 4Runner models, which have different front-end geometry and bumper mounting points.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhy is aluminum used instead of steel for a skid plate?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Front Bumper Skid Plate uses 3\/16-inch aluminum to provide trail impact resistance while keeping added weight lower than a comparable steel panel. Aluminum also resists surface corrosion from mud, water, and road salt without requiring paint or additional coating beyond the powder coat finish already applied.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat finish does the skid plate have, and will it match the bumper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe skid plate carries a satin black powder coat finish, the same finish used on the Rago Full-Width Winch Front Bumper it mounts to. The matching finish keeps the front end visually consistent across both components.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs there a California Proposition 65 warning for this product?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621705322566,"sku":"AC7111203NA","price":429.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/6thGen4Runner-Skid-Plate-Render-sq.jpg?v=1791937031"},{"product_id":"rago-fabrication-land-cruiser-250-gx-550-external-molle-storage-panels","title":"Rago Fabrication Land Cruiser 250 \/ GX 550 External MOLLE Storage Panels","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication External MOLLE Storage Panels are steel, powder-coated panels that mount to the factory roof rails of the 2024+ Toyota Land Cruiser 250 and Lexus GX 550, putting recovery tools, camping gear, and RotoPAX fuel or water containers within reach on the outside of the vehicle. Panels are available as a driver side, passenger side, or matched pair so the setup scales to the storage space each build actually needs.\u003c\/p\u003e\n\n\u003ch2\u003eExternal Storage Without Sacrificing Interior Space\u003c\/h2\u003e\n\u003cp\u003ePositioning gear on the exterior rear side windows keeps the cabin and cargo area clear for passengers and luggage. The Rago Fabrication standard MOLLE pattern accepts a wide range of compatible pouches, straps, and attachment systems, so recovery tools, first-aid kits, and trail supplies mount securely and stay accessible without digging through interior storage. Because the panels attach to the roof rails rather than the glass or body, they do not obstruct rear visibility beyond the footprint of the rails themselves.\u003c\/p\u003e\n\n\u003ch2\u003eFuel and Water Ready From the Start\u003c\/h2\u003e\n\u003cp\u003eEach panel includes integrated mounting provisions for RotoPAX accessories, allowing reserve fuel or water containers to ride on the outside of the vehicle rather than taking up bed or cargo space. The provisions are built into the panel at the design stage, so no secondary bracket or adapter is needed to add a RotoPAX canister once the panel is installed.\u003c\/p\u003e\n\n\u003ch2\u003eRoom to Grow With Your Build\u003c\/h2\u003e\n\u003cp\u003eThe External MOLLE Storage Panels are compatible with Rago Fabrication Roof Rail Crossbars, which span between the panels to create a platform for additional gear. Rago Fabrication Quick Fists can also be added to the panels for securing round-bodied tools such as hi-lift jacks, shovels, or fuel cans. Both expansion options use the same roof rail mounting system, so the overall setup stays modular and can be reconfigured as the build evolves.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard Rago MOLLE Pattern:\u003c\/strong\u003e compatible with Rago Fabrication accessories and a wide range of third-party MOLLE attachment systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRotoPAX Provisions:\u003c\/strong\u003e integrated mounting points for RotoPAX fuel and water containers, no secondary bracket required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Roof Rail Mount:\u003c\/strong\u003e attaches directly to the factory roof rails of the 2024+ Land Cruiser 250 and Lexus GX 550\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExpandable System:\u003c\/strong\u003e compatible with Rago Fabrication Roof Rail Crossbars and Quick Fists for additional load-carrying capacity\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2-Stage Hammer Black Powder Coat:\u003c\/strong\u003e steel construction finished in 2-stage hammer black powder coat with satin black mounts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlexible Purchase Options:\u003c\/strong\u003e sold as a pair, driver side only, or passenger side only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003ePair\u003c\/th\u003e\n      \u003cth\u003eDriver Side\u003c\/th\u003e\n      \u003cth\u003ePassenger Side\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC7709201NA\u003c\/td\u003e\n      \u003ctd\u003eAC7709301NA\u003c\/td\u003e\n      \u003ctd\u003eAC7709401NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e46 lb\u003c\/td\u003e\n      \u003ctd\u003e23 lb\u003c\/td\u003e\n      \u003ctd\u003e23 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd colspan=\"3\"\u003eSteel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd colspan=\"3\"\u003e2-stage hammer black powder coat; satin black mounts\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting\u003c\/td\u003e\n      \u003ctd colspan=\"3\"\u003eFactory OEM roof rails (drilling and riv-nut installation required)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd colspan=\"3\"\u003e2024+ Toyota Land Cruiser 250 \/ Lexus GX 550\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese panels suit 2024+ Toyota Land Cruiser 250 and Lexus GX 550 owners who want to move recovery tools, camping gear, and RotoPAX fuel or water containers to the exterior of the vehicle, freeing interior and cargo space for passengers and luggage. The modular design works equally well for a dedicated overlander building out a full system and for a weekend camper adding a single side panel.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese panels do not fit any vehicle other than the 2024+ Toyota Land Cruiser 250 and Lexus GX 550. Installation requires drilling and riv-nut installation into the factory roof rails; this is not a no-drill or reversible-mount product. Rago Fabrication Roof Rail Crossbars and Quick Fists are sold separately.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes installing these panels require drilling into the vehicle?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. Mounting the Rago Fabrication External MOLLE Storage Panels to the factory roof rails requires drilling and riv-nut installation into the roof rails. This is a permanent-style installation; buyers who need a fully reversible, no-drill solution should note this requirement before purchasing.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan I buy just one side, or do I have to purchase a pair?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication External MOLLE Storage Panels are available in three configurations: a matched pair, a driver side panel only, or a passenger side panel only. Each single-panel option weighs 23 lb; the pair weighs 46 lb. Choose the configuration that fits the storage layout of the build.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat MOLLE accessories are compatible with these panels?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe panels use Rago Fabrication's standard MOLLE pattern, which is compatible with Rago Fabrication's own accessories as well as a wide range of third-party MOLLE pouches and attachment systems. Integrated provisions for RotoPAX fuel and water containers are built into each panel. Rago Fabrication Quick Fists and Roof Rail Crossbars are also compatible and sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhich vehicles do these panels fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication External MOLLE Storage Panels are designed specifically for the 2024+ Toyota Land Cruiser 250 and the 2024+ Lexus GX 550. They mount to the factory OEM roof rails on those vehicles and are not designed to fit any other make, model, or year.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDo the panels come with RotoPAX canisters, crossbars, or Quick Fists included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication External MOLLE Storage Panels include the panels and their mounting hardware for the factory roof rails. RotoPAX canisters, Rago Fabrication Roof Rail Crossbars, and Rago Fabrication Quick Fists are sold separately and are not included with the panels.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Pair","offer_id":50621706502214,"sku":"AC7709201NA","price":479.99,"currency_code":"USD","in_stock":true},{"title":"Driver","offer_id":50621706534982,"sku":"AC7709301NA","price":249.99,"currency_code":"USD","in_stock":true},{"title":"Passenger","offer_id":50621706567750,"sku":"AC7709401NA","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/GX-550-and-LC-250-E-MSP-Main-sq.jpg?v=1791937121"},{"product_id":"rago-fabrication-universal-off-road-light-mount-kit","title":"Rago Fabrication Universal Off-Road Light Mount Kit","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Universal Off-Road Light Mount Kit mounts to select bumpers and crossbars and accepts lights from multiple brands and sizes, including light bars. The kit ships complete with all brackets needed for installation, so no additional hardware sourcing is required before mounting.\u003c\/p\u003e\n\n\u003ch2\u003eFlexibility Across Light Brands and Sizes\u003c\/h2\u003e\n\u003cp\u003eThe Universal Off-Road Light Mount Kit accepts lights from multiple brands and in multiple form factors, so buyers are not locked into a single lighting ecosystem. Swapping to a different light brand or upgrading to a larger bar later does not require a new mount; the kit accommodates the change. That flexibility matters when lighting technology evolves or when a specific light goes on sale from a brand you prefer.\u003c\/p\u003e\n\n\u003ch2\u003eComplete Kit, No Extra Hardware Run\u003c\/h2\u003e\n\u003cp\u003eThe Universal Off-Road Light Mount Kit includes all brackets in the box. Arriving at an install with a partial kit (missing a bracket or fastener) is a common delay on build days. Shipping as a full kit means the hardware needed to complete the mount is already accounted for before the vehicle goes up on stands.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-brand light compatibility:\u003c\/strong\u003e accepts lights from multiple brands and in multiple sizes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLight bar adaptation:\u003c\/strong\u003e adapts light bars to your specific bumper or crossbar setup\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete kit:\u003c\/strong\u003e all brackets included, no additional hardware required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eACNA158501NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e20 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting Compatibility\u003c\/td\u003e\n      \u003ctd\u003eSelect bumpers and crossbars\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Universal Off-Road Light Mount Kit suits overlanders and off-road builders who want to mount aftermarket lights (including light bars) to a compatible bumper or crossbar and prefer not to be restricted to a single lighting brand or size.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis kit does not include a bumper or crossbar; those are sold separately. Compatibility is limited to select bumpers and crossbars; a specific compatibility list is not published on the product page, so confirm fitment with the mounting platform you intend to use before ordering.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this light mount kit work with any bumper or crossbar?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Universal Off-Road Light Mount Kit is designed for use with select bumpers and crossbars. A specific compatibility list is not published; buyers should confirm that their existing or planned bumper or crossbar is a supported mounting platform before purchasing.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat lights are compatible with this kit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Universal Off-Road Light Mount Kit accepts lights from multiple brands and in multiple sizes, including light bars. It is not limited to a single brand's lighting lineup, which allows buyers to choose or upgrade lights independently of the mount.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes the kit include everything needed for installation?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Universal Off-Road Light Mount Kit ships as a complete kit with all brackets included. No additional brackets are required. Specific fastener counts and hardware details are not listed on the product page; confirm any tool requirements before beginning installation.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs professional installation recommended?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe product page does not specify an installation difficulty rating or explicitly recommend professional installation for the Universal Off-Road Light Mount Kit. Buyers who are not comfortable with fabrication-level mounting work on a bumper or crossbar may want to consult a shop familiar with off-road builds.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621707878470,"sku":"ACNA158501NA","price":98.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/universal-light-mount-kit_051fddf2-29a4-4118-91c0-2d68eb429d-sq.jpg?v=1791937148"},{"product_id":"rago-fabrication-2025-toyota-4runner-rear-hatch-ladder","title":"Rago Fabrication 2025+ Toyota 4Runner Rear Hatch Ladder","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Rear Hatch Ladder is a vehicle-specific roof-access ladder for the 2025+ Toyota 4Runner (6th Gen), built from double-wall aluminum side rails with reinforced steel mounting points and extruded aluminum steps fitted with rubber traction pads. A permanent, drilled mount keeps the ladder rigid under load and eliminates the flex or fatigue common to bolt-on universal designs. One fitment is available: 2025 and newer 6th Gen 4Runner only.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to Stay Rigid Under Load\u003c\/h2\u003e\n\u003cp\u003eDouble-wall aluminum side rails paired with reinforced steel mounting points give the Rago Fabrication Rear Hatch Ladder a structural advantage over single-wall or all-aluminum designs. The combination resists lateral flex when a loaded climber shifts weight and holds its geometry over years of trail use without the gradual loosening that plagues lighter-duty ladders. For an overlander who accesses a rooftop tent or roof rack regularly, a ladder that stays tight to the vehicle is a safety baseline, not a luxury.\u003c\/p\u003e\n\n\u003ch2\u003eSecure Footing in Any Condition\u003c\/h2\u003e\n\u003cp\u003eEach step is formed from extruded aluminum and finished with a rubber traction pad. Rubber-over-aluminum grip matters most in the conditions where roof access is most common: wet morning dew on a rooftop tent, dusty desert two-track, or muddy forest roads where boots carry debris onto every surface. The traction pads give a climber confident purchase without relying on boot tread alone, reducing the risk of a slip when hands are occupied with gear.\u003c\/p\u003e\n\n\u003ch2\u003eFull-Length Accessory Mounting Points\u003c\/h2\u003e\n\u003cp\u003eAccessory mounting points run the full length of both side rails, adding tie-down and gear-mounting locations along the entire ladder structure. These points integrate directly with Rago Fabrication roof racks, letting a 4Runner owner build a cohesive, brand-matched system rather than mixing hardware from separate ecosystems. The mounting points also provide flexibility for future additions, including a light bar, a flag mount, or additional cargo management, without modifying the ladder itself.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble-Wall Aluminum Side Rails:\u003c\/strong\u003e paired with reinforced steel mounting points for rigidity under load and long-term fatigue resistance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtruded Aluminum Steps:\u003c\/strong\u003e high-quality extrusion with rubber traction pads for secure footing in wet, dusty, or uneven conditions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull-Length Accessory Mounting Points:\u003c\/strong\u003e run the length of both side rails for tie-down and gear-mounting integration\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHammer-Black Powder-Coat Finish:\u003c\/strong\u003e with brushed aluminum accents for a durable, vehicle-complementary appearance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermanent Drilled Mount:\u003c\/strong\u003e drilling required for installation; provides a secure, vehicle-specific fit with no movement under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2025+ Toyota 4Runner (6th Gen)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSide Rail Material\u003c\/td\u003e\n      \u003ctd\u003eDouble-wall aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting Points\u003c\/td\u003e\n      \u003ctd\u003eReinforced steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStep Material\u003c\/td\u003e\n      \u003ctd\u003eExtruded aluminum with rubber traction pads\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eHammer-black powder-coat with brushed aluminum accents\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e24 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eDrilling required\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC7110201NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Rago Fabrication Rear Hatch Ladder suits 2025 and newer Toyota 4Runner owners who want a permanent, vehicle-specific roof-access solution, particularly those running or planning a Rago Fabrication roof rack, rooftop tent, or overland build where reliable, repeated roof access is part of the daily routine.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis ladder does not fit any 4Runner generation prior to 2025 (5th Gen and earlier are not compatible) and is not a universal or removable design. Installation requires drilling into the vehicle for a permanent mount. A roof rack is not included and is sold separately.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill this ladder fit my 5th Gen or older 4Runner?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Rear Hatch Ladder is designed exclusively for the 2025 and newer 6th Gen Toyota 4Runner. It is not compatible with 5th Gen or earlier 4Runner platforms, which have different hatch geometry and mounting locations.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication Rear Hatch Ladder uses a permanent drilled mount for a secure, vehicle-specific fit. This is not a clamp-on or no-drill design. Buyers who prefer a removable solution should note this before purchasing.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eAre the steps slip-resistant?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach step on the Rago Fabrication Rear Hatch Ladder is formed from extruded aluminum and fitted with a rubber traction pad. The rubber surface provides grip in wet, dusty, and muddy conditions where bare aluminum would be significantly more slippery.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan I mount accessories or gear directly to the ladder?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eAccessory mounting points run the full length of both side rails on the Rago Fabrication Rear Hatch Ladder, providing locations for tie-downs, light mounts, flag mounts, or other gear-mounting hardware along the entire ladder structure.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this ladder integrate with Rago Fabrication roof racks?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Rear Hatch Ladder is designed to pair with Rago Fabrication roof racks for the 6th Gen 4Runner. The accessory mounting points on the side rails are intended to integrate cleanly with that roof rack ecosystem. Roof racks are sold separately.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621710467142,"sku":"AC7110201NA","price":569.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/6th-Gen-4Runner-Rear-Hatch-Ladder-1-sq.jpg?v=1791937245"},{"product_id":"rago-fabrication-2025-toyota-4runner-device-dash-mount","title":"Rago Fabrication 2025+ Toyota 4Runner Device Dash Mount","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Device Dash Mount is a drilled-in, permanent-fit platform for the 2025+ Toyota 4Runner (6th Gen) that positions phones, GPS units, tablets, and trail electronics directly above and beside the factory 8-inch audio multimedia display. Threaded 10-24 mounting points, an integrated dual-USB 12V charging port, and full RAM Mounts compatibility are built in. It ships in one variant sized specifically for the 6th Gen 4Runner dash.\u003c\/p\u003e\n\n\u003ch2\u003eOEM-Like Integration, Off-Road Stability\u003c\/h2\u003e\n\u003cp\u003eThe mount's low-profile design sits flush with the 4Runner's dash contours rather than projecting on a generic arm, which means less visual clutter and fewer vibration-induced rattles on rough terrain. Because it bolts directly to the dash with a drilled, permanent fit, the mounting base stays rigid under the sustained vibration of washboard roads and rock crawling. Friction-fit and suction-cup solutions loosen under those same conditions over time. The result is a platform that feels factory-installed rather than added on.\u003c\/p\u003e\n\n\u003ch2\u003ePower Where You Need It, Factory USB Intact\u003c\/h2\u003e\n\u003cp\u003eThe integrated dual-USB 12V charging port puts device power at the mount itself, so phones and GPS units stay charged through long trail days without running cables to the center console or cigarette lighter. The mount retains full access to the factory radio USB port: both the factory USB connection and the integrated dual-USB 12V charging port remain usable simultaneously.\u003c\/p\u003e\n\n\u003ch2\u003eRAM Mounts Compatible Out of the Box\u003c\/h2\u003e\n\u003cp\u003eThe threaded 10-24 mounting points are the standard interface for RAM Mounts hardware, so any RAM ball, arm, or cradle drops straight onto this base without adapters. That compatibility keeps your device setup flexible: swap between a phone cradle, a tablet arm, or a GPS bracket without replacing the dash mount itself.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory 8-Inch Display Compatibility:\u003c\/strong\u003e designed exclusively for 2025+ 4Runner with the factory 8-inch audio multimedia display\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThreaded 10-24 Mounting Points:\u003c\/strong\u003e multiple points for RAM Mounts hardware and other 10-24 accessories\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated Dual-USB 12V Charging Port:\u003c\/strong\u003e built-in power for devices at the mount location\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory USB Port Access Retained:\u003c\/strong\u003e does not block the factory radio USB port\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHammer Black Powder Coat Finish:\u003c\/strong\u003e durable coating suited to daily use and off-road vibration\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrilling Required:\u003c\/strong\u003e permanent installation for a rigid, rattle-free fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eHammer Black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting Interface\u003c\/td\u003e\n      \u003ctd\u003eMultiple threaded 10-24 points\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCharging Port\u003c\/td\u003e\n      \u003ctd\u003eDual USB, 12V integrated\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRAM Mounts Compatible\u003c\/td\u003e\n      \u003ctd\u003eYes\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eDrilling required\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e5 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2025+ Toyota 4Runner (6th Gen)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDisplay Compatibility\u003c\/td\u003e\n      \u003ctd\u003eFactory 8-inch audio multimedia display only\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC7110901NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis mount suits 2025+ Toyota 4Runner (6th Gen) owners running the factory 8-inch audio multimedia display who want a permanent, rattle-free platform for phones, GPS units, or tablets and prefer RAM Mounts hardware for their device cradles.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis mount does not fit 4Runners with aftermarket head units or any display other than the factory 8-inch unit, and it does not fit any earlier 4Runner generation or other vehicle. Because installation requires drilling, it is not suited to buyers who need a removable or no-drill solution.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill this mount work if I have an aftermarket head unit installed?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication 4Runner Dash Mount is designed specifically around the factory 8-inch audio multimedia display. It is not compatible with aftermarket head units or display sizes other than the factory 8-inch unit. Fitment and clearances are built to that exact OEM configuration.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat devices can I mount on this?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe dash mount's threaded 10-24 points accept RAM Mounts balls, arms, and cradles, which cover phones, tablets, GPS units, and most trail electronics. Device cradles and arms are sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes installation really require drilling, and is it reversible?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes, drilling is required for the Rago Fabrication dash mount to achieve its permanent, rattle-free fit. This is a drilled installation, not a clip-on or adhesive solution, so it is not easily reversible without patching the dash.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes the mount block the factory radio USB port?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Rago Fabrication 4Runner Dash Mount is designed to retain full access to the factory radio USB port. Both the factory USB connection and the mount's integrated dual-USB 12V charging port remain usable simultaneously.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs this compatible with RAM Mounts hardware I already own?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The dash mount includes multiple threaded 10-24 mounting points, which is the standard interface for RAM Mounts balls and bases. Existing RAM hardware that uses 10-24 threads mounts directly without adapters.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this product carry a California Proposition 65 warning?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. This product can expose you to chemicals including crystalline silica, which is known to the State of California to cause cancer. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621711220806,"sku":"AC7110901NA","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/6th-Gen-4Runner-Device-Dash-Mount-1-sq.jpg?v=1791937291"},{"product_id":"rago-fabrication-2025-toyota-4runner-wifey-block-mount","title":"Rago Fabrication 2025+ Toyota 4Runner Wifey Block Mount","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Wifey Block Mount is a brushed aluminum adapter bracket designed for 2025+ Toyota 4Runner builds running the Rago Air Compressor Mount. It bolts directly to the Rago Air Compressor Mount (AC7110700NA) and positions the Wifey Air System Manifold alongside the compressor, keeping the air system consolidated in one under-hood location. This mount is a component of a larger system and requires the Rago Air Compressor Mount to install.\u003c\/p\u003e\n\n\u003ch2\u003eManifold Placement Where It Belongs\u003c\/h2\u003e\n\u003cp\u003eRouting an air system manifold to a random bracket or zip-tied location means longer hose runs, awkward connections, and a setup that looks unfinished. The Wifey Block Mount solves that by giving the Wifey Air System Manifold a dedicated, fixed home directly adjacent to the compressor. With the manifold and compressor sharing the same mount footprint, hose runs stay short and the entire air system reads as a single, intentional installation rather than a collection of parts.\u003c\/p\u003e\n\n\u003ch2\u003eBolt-On Installation, No Fabrication Required\u003c\/h2\u003e\n\u003cp\u003eThe Wifey Block Mount installs with a straightforward bolt-on process onto the Rago Air Compressor Mount. No drilling, no custom brackets, and no modifications to the vehicle are required beyond what the compressor mount itself already handles. For builders who want a clean result without shop time, that simplicity matters. The bracket goes on, the manifold mounts to it, and the system is ready to use.\u003c\/p\u003e\n\n\u003ch2\u003eExpandable Air System Foundation\u003c\/h2\u003e\n\u003cp\u003eThe Wifey Block Mount is compatible with the Rago Fabrication Wifey Air System (R60FTWIFEYAIRSYSTEM) and Rago Fabrication Universal Air Mounts (R0000WIFEYAIRMOUNT), so the air system can grow as the build does. Adding outlets, relocating connections, or expanding the manifold configuration all remain possible without replacing the core mounting hardware.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDedicated manifold positioning:\u003c\/strong\u003e mounts the Wifey Air System Manifold directly alongside the compressor on the Rago Air Compressor Mount\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrushed aluminum construction:\u003c\/strong\u003e lightweight, corrosion-resistant material suited to under-hood use\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBolt-on installation:\u003c\/strong\u003e attaches directly to the Rago Air Compressor Mount with no drilling or vehicle modification\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSystem expandability:\u003c\/strong\u003e compatible with the Rago Wifey Air System and Universal Air Mounts for future additions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eBrushed Aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2025+ Toyota 4Runner\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRequired Component\u003c\/td\u003e\n      \u003ctd\u003eRago Fabrication 2025+ Toyota 4Runner Air Compressor Mount (AC7110700NA)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Expansions\u003c\/td\u003e\n      \u003ctd\u003eRago Fabrication Wifey Air System (R60FTWIFEYAIRSYSTEM); Rago Fabrication Universal Air Mounts (R0000WIFEYAIRMOUNT)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC7110800NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Wifey Block Mount is for 2025+ Toyota 4Runner owners who are building out the Rago Air Compressor Mount system and want to integrate the Wifey Air System Manifold in a clean, compressor-adjacent location. It suits overlanders and off-road builders who prioritize a tidy, expandable under-hood air setup.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis bracket does not fit any vehicle other than the 2025+ Toyota 4Runner, and it cannot be installed without the Rago Fabrication Air Compressor Mount (AC7110700NA). It does not include the air compressor, the Wifey Air System Manifold, or any other air system components. All are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the Wifey Block Mount be installed without the Rago Air Compressor Mount?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Wifey Block Mount is designed to bolt directly onto the Rago Fabrication 2025+ Toyota 4Runner Air Compressor Mount (AC7110700NA). That compressor mount is a required component; the block mount has no independent mounting point and cannot be installed without it.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the Wifey Block Mount actually hold?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Wifey Block Mount provides a mounting location for the Rago Fabrication Wifey Air System Manifold, positioning it directly alongside the compressor. The compressor itself is held by the Rago Air Compressor Mount, to which this bracket attaches.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this kit include the air compressor or the Wifey Air System?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Wifey Block Mount is a bracket component only. The air compressor, the Wifey Air System Manifold, and the Wifey Air System are all sold separately. The block mount is one piece of a larger system that must be assembled from compatible Rago Fabrication components.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the Wifey Block Mount made of?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Wifey Block Mount is constructed from brushed aluminum, a lightweight and corrosion-resistant material appropriate for under-hood mounting environments on the 2025+ Toyota 4Runner.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs there a California Proposition 65 warning for this product?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Wifey Block Mount carries a California Proposition 65 warning: this product can expose you to chemicals including crystalline silica, which is known to the State of California to cause cancer. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621714792518,"sku":"AC7110800NA","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/6th-Gen-4Runner-Wifey-Block-Mount-1-sq.jpg?v=1791937414"},{"product_id":"rago-fabrication-6th-gen-toyota-4runner-exterior-molle-storage-panels","title":"Rago Fabrication 6th Gen Toyota 4Runner Exterior MOLLE Storage Panels","description":"\u003cp class=\"product-lead\"\u003eRago Fabrication's Exterior MOLLE Storage Panels mount to the factory roof rails of the 2025+ Toyota 4Runner (6th Gen), turning the rear exterior into a functional gear-mounting surface for overlanding and trail use. Steel construction and a dual-stage hammer black powder coat finish keep the panels durable and visually consistent with the 4Runner's exterior. The panels are available as a pair or as individual driver-side and passenger-side units.\u003c\/p\u003e\n\n\u003ch2\u003eOrganized Gear Within Reach\u003c\/h2\u003e\n\u003cp\u003eThe full MOLLE grid accepts bolts, straps, zip ties, Quick Fists, and other MOLLE-compatible attachment systems, so shovels, axes, recovery straps, and soft gear can be secured flat against the vehicle rather than buried in the bed or cargo area. Keeping tools on the exterior means faster access when conditions change on the trail, with no unpacking required. Carriage bolt slots built into the panel face add a second mounting method for long-handled tools that don't pair naturally with MOLLE loops.\u003c\/p\u003e\n\n\u003ch2\u003eRotopax-Ready Mounting Points\u003c\/h2\u003e\n\u003cp\u003eIntegrated mounting points sized for Rotopax mounts let the panels carry fuel or water containers directly on the exterior, freeing interior cargo space for gear that needs to stay dry or temperature-stable. Reserve fuel or water secured on the exterior reduces the planning overhead for remote routes where resupply isn't guaranteed. Rotopax mounts are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eRoof-Rail and Crossbar Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe tops of the panels attach to the 4Runner's factory roof rails, so no additional structure is required to get started. For builds that already include Rago's Overland Crossbars, the panels attach to those instead, integrating the storage surface into a larger roof-mounted system. The bottoms of the panels secure to the rear windows using the two included RAM Mount suction cups per panel, anchoring the lower edge without permanent modification to the glass or body.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull MOLLE Grid:\u003c\/strong\u003e compatible with bolts, straps, zip ties, Quick Fists, and MOLLE-compatible attachment systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated Rotopax Mount Points:\u003c\/strong\u003e dedicated mounting locations for Rotopax fuel and water containers (Rotopax mounts sold separately)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCarriage Bolt Slots:\u003c\/strong\u003e built-in slots for securing long-handled tools such as shovels and axes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-Stage Hammer Black Powder Coat:\u003c\/strong\u003e durable finish over steel construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded RAM Mount Suction Cups:\u003c\/strong\u003e two heavy-duty suction cups per panel secure the lower edge to the rear window\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThree Purchase Configurations:\u003c\/strong\u003e available as a pair, driver side only, or passenger side only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eSteel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eDual-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2025+ Toyota 4Runner (6th Gen)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTop Mounting\u003c\/td\u003e\n      \u003ctd\u003eFactory roof rails or Rago Overland Crossbars\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBottom Mounting\u003c\/td\u003e\n      \u003ctd\u003eRAM Mount suction cups (2 included per panel) to rear window\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConfigurations Available\u003c\/td\u003e\n      \u003ctd\u003ePair; Driver Side Only; Passenger Side Only\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eRequires drilling and riv-nuts\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese panels suit 2025+ Toyota 4Runner (6th Gen) owners who want exterior MOLLE-based gear storage, particularly overlanders and trail drivers who need fast access to tools, recovery equipment, or reserve fuel and water containers without consuming interior cargo space. Buyers comfortable with a drill-and-riv-nut installation, or willing to have it done professionally, will get the most from this setup.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese panels do not fit 4Runner models equipped with an ARB Roof Rack. They are not a bolt-on, tool-free installation: drilling and riv-nuts are required. Rotopax mounts and Rago Overland Crossbars are not included and must be purchased separately if needed.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does installation require?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eInstalling the Rago Fabrication Exterior MOLLE Storage Panels requires drilling and riv-nuts. The tops of the panels attach to the factory roof rails or Rago Overland Crossbars, and the bottoms secure to the rear windows using the two included RAM Mount suction cups per panel. This is not a tool-free installation.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill these panels fit a 4Runner that has an ARB Roof Rack installed?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Rago Fabrication Exterior MOLLE Storage Panels are not compatible with ARB Roof Racks. They are designed to mount to the 2025+ Toyota 4Runner's factory roof rails or Rago's own Overland Crossbars only.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDo I need Rago's Overland Crossbars to install these panels?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eRago's Overland Crossbars are not required. The tops of the Exterior MOLLE Storage Panels mount directly to the 4Runner's factory roof rails. The Rago Overland Crossbars are a compatible option for builds that include them, but they are sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan I mount a Rotopax fuel or water container to these panels?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication Exterior MOLLE Storage Panels include integrated mounting points designed for Rotopax mounts, making them a natural location for Rotopax fuel or water containers. Rotopax mounts are sold separately and are not included with the panels.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat MOLLE accessories and attachment methods are compatible?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe MOLLE grid on these panels accepts bolts, straps, zip ties, Quick Fists, and other standard MOLLE-compatible attachment systems. Carriage bolt slots built into the panel face provide an additional mounting method for long-handled tools such as shovels and axes.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Pair","offer_id":50621715775558,"sku":"AC7109201NA","price":429.99,"currency_code":"USD","in_stock":true},{"title":"Driver Side","offer_id":50621715808326,"sku":"AC7109301NA","price":237.99,"currency_code":"USD","in_stock":true},{"title":"Passenger Side","offer_id":50621715841094,"sku":"AC7109401NA","price":237.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/6th-gen-4Runner-Exterior-Molle-Storage-Panels-for-Factory-Ro-sq.jpg?v=1791937548"},{"product_id":"rago-fabrication-2016-2023-toyota-tacoma-rear-bumper","title":"Rago Fabrication 2016-2023 Toyota Tacoma Rear Bumper","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Rear Bumper for 2016–2023 Toyota Tacoma (3rd Gen) is a steel-construction replacement bumper with a low-profile fitment, two integrated 1-inch thick CNC-cut D-ring mounts, and a pair of pod-light mount positions compatible with Baja Designs S2 or SRM lights. The bumper retains OEM parking sensors, recovery points, license plate lights, and trailer plug and wiring, and carries a 2-stage hammer black powder coat finish with satin black powder-coated aluminum accent panels. Made in the USA.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Recovery Without Sacrificing Daily Utility\u003c\/h2\u003e\n\u003cp\u003eThe two integrated 1-inch thick CNC-cut D-ring mounts give the Tacoma a dedicated recovery anchor at the rear without requiring bolt-on hardware after the fact. Having recovery points machined directly into the bumper structure means they are positioned and rated as part of the bumper itself, not as an afterthought. For a truck that sees both trail use and daily driving, that reliability matters when a recovery situation is not planned.\u003c\/p\u003e\n\u003cp\u003eRago's engineering retains the factory parking sensors, OEM recovery points, license plate lights, and trailer plug and wiring. Replacing a rear bumper often means losing one or more of these features; this bumper is designed so none of them require relocation or deletion. The truck continues to function as it did from the factory for towing, reversing in tight spaces, and roadside compliance.\u003c\/p\u003e\n\n\u003ch2\u003eRear Lighting Ready for Trail or Camp\u003c\/h2\u003e\n\u003cp\u003eThe bumper includes a pair of pod-light mount positions sized for Baja Designs S2 or SRM lights (lights sold separately). Mounting positions built into the bumper structure place rear auxiliary lighting lower and wider than a roof or bed-rail mount, improving visibility directly behind the truck when backing into a campsite or navigating a tight trail reversal at night. No separate bracket fabrication or drilling is required.\u003c\/p\u003e\n\n\u003ch2\u003eFinish and Construction\u003c\/h2\u003e\n\u003cp\u003eThe bumper body is steel construction with a 2-stage hammer black powder coat finish. Aluminum accent panels carry a satin black powder coat. The low-profile fitment keeps the bumper close to the truck's body lines rather than adding significant rear overhang, which preserves departure angle on steep exits. Rago Fabrication products are made in the USA.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated D-ring mounts:\u003c\/strong\u003e two 1-inch thick CNC-cut D-ring mounts built into the bumper structure for rear vehicle recovery\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePod-light mount positions:\u003c\/strong\u003e pair of mounts compatible with Baja Designs S2 or SRM lights (lights sold separately)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM feature retention:\u003c\/strong\u003e retains factory parking sensors, recovery points, license plate lights, and trailer plug and wiring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2-stage powder coat finish:\u003c\/strong\u003e hammer black powder coat on the steel body; satin black powder coat on aluminum accent panels\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow-profile fitment:\u003c\/strong\u003e stays close to factory body lines to limit added rear overhang\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eMade in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2016–2023 Toyota Tacoma (3rd Gen)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBody Material\u003c\/td\u003e\n      \u003ctd\u003eSteel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAccent Panel Material\u003c\/td\u003e\n      \u003ctd\u003ePowder-coated aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish (Body)\u003c\/td\u003e\n      \u003ctd\u003e2-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish (Accent Panels)\u003c\/td\u003e\n      \u003ctd\u003eSatin black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eD-Ring Mounts\u003c\/td\u003e\n      \u003ctd\u003e(2) 1-inch thick, CNC cut, integrated\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePod-Light Mount Positions\u003c\/td\u003e\n      \u003ctd\u003ePair; compatible with Baja Designs S2 or SRM (lights sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOEM Features Retained\u003c\/td\u003e\n      \u003ctd\u003eParking sensors, recovery points, license plate lights, trailer plug and wiring\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBlind-Spot Monitor Compatibility\u003c\/td\u003e\n      \u003ctd\u003eNot compatible with factory blind-spot monitors on equipped models\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eMade in the USA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eR6802350901NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis bumper suits 2016–2023 Toyota Tacoma owners who want a steel rear bumper with integrated recovery points and rear auxiliary lighting capability while keeping all factory sensors, trailer wiring, and license plate lighting intact. It is a strong fit for overlanders and off-road drivers who need a functional, low-profile rear bumper that works on the trail and on the street without modification to factory systems.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis bumper does not fit Tacoma model years outside 2016–2023 or any other vehicle. It is not compatible with factory blind-spot monitoring systems on equipped Tacoma models. Baja Designs pod lights are not included. Prior to installation, the factory ADAS\/TSS system must be confirmed in proper working condition; if recalibration is required, it must be performed with OEM equipment and the factory bumper before this bumper is installed, as recalibration cannot be performed with this aftermarket bumper in place.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this bumper retain the factory parking sensors and trailer wiring?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication Tacoma Rear Bumper is engineered to retain the OEM parking sensors, factory recovery points, license plate lights, and trailer plug and wiring. No relocation or deletion of these features is required during installation.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs this bumper compatible with the factory blind-spot monitoring system?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Rago Fabrication Tacoma Rear Bumper is not compatible with the factory blind-spot monitors on Tacoma models equipped with that system. Buyers with blind-spot monitoring should confirm this limitation before purchasing.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat pod lights fit the built-in mount positions?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Tacoma Rear Bumper includes a pair of pod-light mount positions compatible with Baja Designs S2 or SRM lights. The lights themselves are sold separately and are not included with the bumper.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat do I need to know about my ADAS system before installing this bumper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eBefore installing the Rago Fabrication Tacoma Rear Bumper, confirm that the factory ADAS\/TSS system is in proper working condition. If recalibration is needed, it must be completed using OEM equipment with the factory bumper still installed; recalibration cannot be performed once this aftermarket bumper is in place.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat years and trim levels does this bumper fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Rear Bumper fits 2016–2023 Toyota Tacoma (3rd Gen). It does not fit Tacoma model years outside that range or any other vehicle make or model. Fitment does not vary by trim level, but blind-spot monitor compatibility is a separate consideration for equipped models.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621715873862,"sku":"R6802350901NA","price":1249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2016-2023-Toyota-Tacoma-Rear-Bumper-sq.jpg?v=1791937552"},{"product_id":"rago-fabrication-2025-toyota-4runner-center-mount-rear-bumper","title":"Rago Fabrication 2025+ Toyota 4Runner Center Mount Rear Bumper","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Center Mount Rear Bumper is a steel, low-profile replacement rear bumper built for the 2025+ Toyota 4Runner (6th Gen). Designed for overlanding and off-road use, it retains the factory blind spot monitoring and parking sensors while adding two integrated pod light mounts. The bumper is finished in a dual-stage hammer black powder coat and is made in the USA.\u003c\/p\u003e\n\n\u003ch2\u003eLow-Profile Design for Serious Trail Use\u003c\/h2\u003e\n\u003cp\u003eThe Center Mount Rear Bumper's low-profile geometry keeps the rear approach angle clear of obstacles that a taller, more protruding bumper would catch. On technical terrain (rocky descents, tight switchbacks, rutted two-track), that clearance translates directly into fewer hung-up moments and more confident reversals. The design integrates with the 4Runner's factory body lines rather than adding bulk that changes how the vehicle handles tight spots.\u003c\/p\u003e\n\n\u003ch2\u003eIntegrated Pod Light Mounts for Rear Visibility\u003c\/h2\u003e\n\u003cp\u003eTwo built-in pod light mounts accept Baja Designs S2 or RIGID SR-M lights without additional fabrication or brackets. Rear-facing auxiliary lighting is one of the most practical additions for camp setup in the dark, reversing on unlit trails, or signaling position during convoy runs. Having the mounts machined into the bumper itself means the lights sit at a consistent, purpose-built angle rather than wherever a clamp happened to land.\u003c\/p\u003e\n\n\u003ch2\u003eFactory Safety Systems Stay Intact\u003c\/h2\u003e\n\u003cp\u003eThe bumper is engineered to retain the 4Runner's OEM blind spot monitoring and parking sensors. Replacing a rear bumper often means losing those systems or paying for recalibration. This bumper is designed to avoid that trade-off. Drivers who rely on blind spot alerts in daily driving or tight campground maneuvering keep that functionality without modification.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow-profile fitment:\u003c\/strong\u003e designed to maximize rear departure clearance on the 2025+ 4Runner\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual pod light mounts:\u003c\/strong\u003e compatible with Baja Designs S2 or RIGID SR-M pod lights\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM sensor retention:\u003c\/strong\u003e retains factory blind spot monitoring and parking sensors\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-stage hammer black powder coat:\u003c\/strong\u003e resilient finish applied in two stages for durability\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSteel construction:\u003c\/strong\u003e durable steel build for off-road protection\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in USA:\u003c\/strong\u003e manufactured domestically\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eSteel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eDual-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePod Light Mounts\u003c\/td\u003e\n      \u003ctd\u003e2 (compatible with Baja Designs S2 or RIGID SR-M)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOEM Sensor Compatibility\u003c\/td\u003e\n      \u003ctd\u003eRetains factory blind spot monitoring and parking sensors\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2025+ Toyota 4Runner (6th Gen)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eUSA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eR710255090103\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis bumper suits 2025+ Toyota 4Runner (6th Gen) owners who wheel on rocky or technical terrain and want rear protection with integrated pod light capability and a factory-compatible sensor setup. It is a strong fit for overlanders who want a purpose-built steel bumper without sacrificing OEM driver-assist features.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis bumper does not fit any 4Runner generation prior to the 2025 6th Gen, and it is not compatible with other Toyota models. Installation requires trimming and is not a direct bolt-on replacement. Pod lights (Baja Designs S2, RIGID SR-M) are sold separately. Professional installation is recommended given the trimming requirement.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes installing this bumper require cutting or trimming?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Center Mount Rear Bumper requires trimming during installation on the 2025+ Toyota 4Runner. Professional installation is recommended for buyers who are not comfortable with bodywork modifications.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill this bumper interfere with the 4Runner's blind spot monitoring or parking sensors?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Rago Fabrication Center Mount Rear Bumper is designed to retain the 2025+ 4Runner's factory blind spot monitoring system and parking sensors. Both systems remain functional after installation without requiring recalibration or relocation of the sensor hardware.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat pod lights fit the built-in mounts on this bumper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe two integrated pod light mounts on the Rago Fabrication Center Mount Rear Bumper are compatible with Baja Designs S2 and RIGID SR-M pod lights. The lights themselves are sold separately and are not included with the bumper.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat finish does this bumper have, and how durable is it?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Center Mount Rear Bumper is finished in a dual-stage hammer black powder coat. The two-stage application process provides a resilient surface intended to resist chipping and corrosion from trail use and weather exposure.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs there a California Proposition 65 warning for this product?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621719740486,"sku":"R710255090103","price":998.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/6th-Gen-4Runner-Center-Mount-Rear-Bumper-1-sq.jpg?v=1791937679"},{"product_id":"rago-fabrication-6th-gen-4runner-overland-crossbars-for-factory-roof-r","title":"Rago Fabrication 6th Gen 4Runner Overland Crossbars for Factory Roof Rails","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication 6th Gen 4Runner Overland Crossbars are a set of five steel crossbars that mount to the factory roof rails of 2025 and newer Toyota 4Runner models, creating a sturdy rooftop platform for a rooftop tent, cargo box, or other gear without requiring a full roof rack. Each crossbar includes integrated L-Track receiver mounts and Rotopax-compatible attachment points for a wide range of rooftop storage configurations. Installation requires drilling and riv-nut installation into the factory roof rails.\u003c\/p\u003e\n\n\u003ch2\u003eA Capable Roof Platform Without the Bulk\u003c\/h2\u003e\n\u003cp\u003eA full roof rack adds significant weight and height and can affect fuel economy and clearance even when nothing is loaded on it. The Rago Fabrication crossbars give the 2025+ 4Runner a genuine rooftop mounting platform (one that handles a rooftop tent or heavy cargo) while keeping the vehicle's roofline low and its exterior profile close to stock when the rack is empty or lightly loaded. For overlanders who want capability without committing to a full rack's permanent presence, the low-profile crossbar approach is a practical middle ground.\u003c\/p\u003e\n\n\u003ch2\u003eVersatile Mounting Built Into Every Bar\u003c\/h2\u003e\n\u003cp\u003eEach of the five crossbars ships with integrated L-Track receiver mounts, which accept a wide range of L-Track-compatible accessories, including tie-down rings, cargo stops, and gear mounts, without additional drilling or adapters. The crossbars also include integrated attachment points compatible with Rotopax fuel and water container mounts, so liquid storage can be positioned on the roof rather than consuming bed or interior space. A universal mounting hole pattern across all five bars means the crossbars are also compatible with Rago's own Exterior MOLLE Storage Panels designed for the 4Runner's OEM roof rails, allowing the system to expand as the build grows.\u003c\/p\u003e\n\n\u003ch2\u003eSteel Construction, Durable Finish\u003c\/h2\u003e\n\u003cp\u003eThe crossbars are fabricated from heavy-duty steel and finished in a dual-stage hammer black powder coat. The two-stage powder coat process builds a thicker, more resilient surface layer than a single-stage finish, which matters for a component that lives on the exterior of the vehicle and takes direct exposure to weather, road debris, and UV. The hammer texture also reduces the visual impact of minor scuffs compared with a smooth gloss finish.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSet of Five Crossbars:\u003c\/strong\u003e complete set mounts across the full span of the factory roof rails\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated L-Track Receiver Mounts:\u003c\/strong\u003e built into each crossbar for tool-free accessory attachment\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRotopax-Compatible Attachment Points:\u003c\/strong\u003e integrated mounting points accept Rotopax fuel and water container mounts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal Mounting Pattern:\u003c\/strong\u003e compatible with Rago's Exterior MOLLE Storage Panels for OEM roof rails\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow-Profile Fitment:\u003c\/strong\u003e sits close to the roofline to preserve exterior styling when not fully loaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-Stage Hammer Black Powder Coat:\u003c\/strong\u003e two-stage finish over heavy-duty steel construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2025+ Toyota 4Runner (6th Gen) with factory roof rails\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eQuantity\u003c\/td\u003e\n      \u003ctd\u003eSet of 5 crossbars\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eHeavy-duty steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eDual-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShipping Weight\u003c\/td\u003e\n      \u003ctd\u003e56 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eRequires drilling and riv-nut installation; factory roof rails required\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC7109501NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese crossbars suit 2025 and newer Toyota 4Runner owners who have the factory roof rails installed and want a rooftop mounting platform for a rooftop tent, Rotopax containers, or L-Track-compatible cargo gear without installing a full roof rack. They are a strong fit for overlanders who want to preserve the 4Runner's exterior profile when the roof is unloaded.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese crossbars do not fit any 4Runner generation prior to the 2025 6th Gen, and they do not fit 2025+ 4Runner models that are not equipped with the factory roof rails. Installation requires drilling and riv-nut work; the crossbars are not a no-drill, clamp-on solution.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich 4Runner generations and years do these crossbars fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Overland Crossbars are designed specifically for the 2025 and newer Toyota 4Runner (6th generation). They do not fit 5th Gen or earlier 4Runner models. The factory roof rails must be present on the vehicle; the crossbars mount to those rails and cannot be installed without them.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDo I need to drill to install these crossbars?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication 6th Gen 4Runner Overland Crossbars require drilling and the use of riv-nuts for installation. This is a permanent or semi-permanent modification to the vehicle's roof rail area. Buyers who prefer a no-drill mounting solution should look for a clamp-based crossbar system instead.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat accessories can I mount to these crossbars?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach crossbar includes integrated L-Track receiver mounts, which accept the broad range of L-Track-compatible accessories, including tie-downs, cargo stops, and gear mounts, without additional hardware. The crossbars also include integrated attachment points compatible with Rotopax fuel and water container mounts. The universal mounting hole pattern makes the set compatible with Rago's Exterior MOLLE Storage Panels designed for the 4Runner's OEM roof rails.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan I mount a rooftop tent to these crossbars?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication crossbars are designed to support a rooftop tent on the 2025+ 4Runner without requiring a full roof rack. No load rating is published for this set; buyers planning to mount a rooftop tent should confirm the tent's mounting requirements against the crossbars' capacity before purchasing.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eAre riv-nuts and hardware included in the set?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eInstallation requires drilling and the use of riv-nuts; whether riv-nuts and installation hardware are included in the set is not specified. Confirm what is included with TerrainVault before ordering if this affects your installation plan.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621720330310,"sku":"AC7109501NA","price":389.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2025_Toyota4RunnerCrossmembersforFactoryRoofRails-sq.jpg?v=1791937733"},{"product_id":"rago-fabrication-2025-toyota-4runner-trailing-arm-skid-plates","title":"Rago Fabrication 2025+ Toyota 4Runner Trailing Arm Skid Plates","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Trailing Arm Skid Plates are frame-mounted steel skid plates designed to protect the trailing arms of the 2025+ Toyota 4Runner (6th Gen) from rocks, stumps, and other trail obstacles. A drafted leading face channels impacts away from the trailing arms rather than letting them absorb a direct hit, reducing the risk of suspension misalignment on technical terrain. Sold as a pair.\u003c\/p\u003e\n\n\u003ch2\u003eDrafted to Deflect, Not Just Absorb\u003c\/h2\u003e\n\u003cp\u003eThe angled leading face of each skid plate functions as a ramp, not a flat shield. When the skid contacts a rock or ledge, the geometry redirects the force upward and outward, letting the vehicle glide over rather than stop against the obstacle. That difference matters on repeated hits: a trailing arm that absorbs direct impacts accumulates stress that can bend or knock it out of alignment, while a deflecting skid spreads the load and keeps the suspension geometry where it belongs.\u003c\/p\u003e\n\n\u003ch2\u003eFrame-Mounted for Structural Rigidity\u003c\/h2\u003e\n\u003cp\u003eMounting directly to the 4Runner's frame rather than to body panels means the skid plates share the vehicle's primary load path. There is no flex or give from a body-mounted bracket between the skid and the chassis, so the protection stays in position when it matters most. Frame mounting also keeps the skid plates from transferring impact energy into body panels or interior trim.\u003c\/p\u003e\n\n\u003ch2\u003eDual-Stage Hammer Black Powder Coat\u003c\/h2\u003e\n\u003cp\u003eEach skid plate leaves the shop with a two-stage hammer black powder coat finish. The textured hammer pattern resists scratching and scuffing better than a smooth coat, and the dual-stage process builds a thicker, more adhesion-resistant barrier against moisture and trail debris. The finish is consistent across both plates in the pair.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrame-mount design:\u003c\/strong\u003e bolts directly to the 4Runner's frame for a rigid, stable connection\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrafted leading face:\u003c\/strong\u003e angled geometry deflects rocks and obstacles away from trailing arms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavy-duty steel construction:\u003c\/strong\u003e built to absorb and redirect trail impacts without deforming\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-stage hammer black powder coat:\u003c\/strong\u003e textured two-stage finish for corrosion and abrasion resistance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold as a pair:\u003c\/strong\u003e both driver- and passenger-side skid plates included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2025+ Toyota 4Runner (6th Gen)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eHeavy-duty steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eDual-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMount Type\u003c\/td\u003e\n      \u003ctd\u003eFrame-mounted\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eQuantity\u003c\/td\u003e\n      \u003ctd\u003eSold as a pair\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC7106801NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese skid plates are built for 2025+ Toyota 4Runner (6th Gen) owners who run technical off-road terrain and want to protect their trailing arms and suspension geometry from rock strikes and trail debris. They suit overlanders and off-road drivers who prioritize frame-mounted, purpose-built protection over universal or body-mounted alternatives.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese skid plates do not fit 1st through 5th Gen Toyota 4Runner models. They protect the trailing arms specifically and do not replace or include any suspension components. No suspension parts, mounting hardware counts, or other skid plates are included beyond the pair described.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich 4Runner generations do these skid plates fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Trailing Arm Skid Plates are designed specifically for the 2025+ Toyota 4Runner, which is the 6th generation of the model. They are not compatible with 1st through 5th Gen 4Runner vehicles, which use a different frame and trailing arm geometry.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eAre both driver- and passenger-side skid plates included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication Trailing Arm Skid Plates are sold as a pair, meaning both the driver-side and passenger-side plates are included in a single purchase. No additional set purchase is needed to cover both trailing arms.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow do these mount to the vehicle?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Trailing Arm Skid Plates mount directly to the 4Runner's frame rather than to body panels. Frame mounting provides a rigid, stable connection that keeps the skid plates in position under repeated trail impacts without transferring force into body or trim components.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the drafted leading face do?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe drafted leading face is an angled surface at the front of each skid plate that redirects rocks and trail obstacles upward and outward rather than letting the trailing arm absorb a direct hit. This deflection geometry reduces the cumulative stress on the trailing arms and helps maintain suspension alignment on technical terrain.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat finish do these skid plates have, and how durable is it?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach Rago Fabrication Trailing Arm Skid Plate is finished in a dual-stage hammer black powder coat. The textured hammer pattern resists surface scratching and scuffing, and the two-stage application builds a thicker barrier against moisture and trail debris than a single-stage smooth coat.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621722361926,"sku":"AC7106801NA","price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/6th-Gen-4Runner-Trailing-Arm-Skid-Plates-Offtruck-1-sq.jpg?v=1791937812"},{"product_id":"rago-fabrication-2025-toyota-4runner-rear-shock-guards","title":"Rago Fabrication 2025+ Toyota 4Runner Rear Shock Guards","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Rear Shock Guards are a sold-as-a-pair steel undercarriage protection set built for the 6th Generation Toyota 4Runner (2025 and newer). A drafted leading face deflects rocks, roots, and trail debris away from the shock body before impact loads can build, and double sheared mounts anchor each guard with maximum structural rigidity at the attachment points.\u003c\/p\u003e\n\n\u003ch2\u003eDrafted to Deflect, Not Just Absorb\u003c\/h2\u003e\n\u003cp\u003eThe leading face of each shock guard is drafted, angled so that rocks and roots are redirected rather than stopped dead. When a trail obstacle strikes a flat surface, the full impact transfers into whatever is behind it; a drafted face converts that same energy into a glancing deflection, letting the 4Runner's undercarriage continue moving forward rather than taking a direct hit. For rear shocks, which are among the first undercarriage components to contact obstacles on steep descents and rocky terrain, that geometry difference is the margin between a scuffed guard and a damaged shock body.\u003c\/p\u003e\n\n\u003ch2\u003eDouble Sheared Mounts for Structural Confidence\u003c\/h2\u003e\n\u003cp\u003eEach guard uses double sheared mounts: a fabrication method that shears the mounting tab on both faces rather than one, producing a cleaner, more consistent cut and a stronger load path at the joint. On a component that takes repeated lateral and vertical impacts off-road, mount integrity determines whether the guard stays in position and keeps protecting, or shifts and leaves the shock exposed. Heavy-duty steel construction and a 2-stage hammer black powder coat finish complete the build: the powder coat resists chipping and corrosion from the same rocks and mud the guard is designed to deflect.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrafted Leading Face:\u003c\/strong\u003e angled geometry deflects rocks, roots, and trail debris away from shock bodies\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble Sheared Mounts:\u003c\/strong\u003e sheared on both faces for maximum strength at attachment points\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Steel Construction:\u003c\/strong\u003e built to absorb and redirect repeated trail impacts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2-Stage Hammer Black Powder Coat:\u003c\/strong\u003e resilient finish resists chipping and corrosion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold as a Pair:\u003c\/strong\u003e one purchase covers both rear shocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2025+ Toyota 4Runner (6th Generation)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eHeavy-duty steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003e2-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eQuantity\u003c\/td\u003e\n      \u003ctd\u003eSold as a pair\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC7102001NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese shock guards are built for 6th Generation Toyota 4Runner owners (2025 and newer) who run rocky, rooted, or technical terrain and want to protect their rear shocks from direct trail impacts before damage occurs.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese guards do not fit 5th Generation or earlier Toyota 4Runner models, and no fitment data is available for any other vehicle. They protect the rear shock bodies specifically. These guards are not a full undercarriage skid system and do not cover other drivetrain or suspension components.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat exactly do these guards protect against?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Rear Shock Guards shield the 4Runner's rear shock bodies from direct contact with rocks, roots, and trail debris. The drafted leading face redirects impacts rather than absorbing them flat-on, reducing the force transferred into the shock body during technical off-road driving.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDo these fit 5th Generation or older 4Runner models?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. These rear shock guards are designed specifically for the 6th Generation Toyota 4Runner (2025 and newer) and are not compatible with 5th Generation or earlier 4Runner models. No cross-generation fitment data is available.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eAre both sides included, or do I need to buy two?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eOne purchase of the Rago Fabrication Rear Shock Guards includes a pair, one guard for each rear shock. No additional purchase is needed to cover both sides of the vehicle.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the finish, and how does it hold up off-road?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe guards are finished in a 2-stage hammer black powder coat, a layered application that resists chipping and corrosion from the rocks, mud, and moisture these guards are designed to encounter on the trail.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs there a California Proposition 65 warning for this product?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. This product can expose you to chemicals including crystalline silica, which is known to the State of California to cause cancer. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621723312198,"sku":"AC7102001NA","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/6th-Gen-4Runner-Rear-Shock-Guards-Render-1-sq.jpg?v=1791937846"},{"product_id":"rago-fabrication-2025-toyota-4runner-external-molle-storage-panels","title":"Rago Fabrication 2025+ Toyota 4Runner External MOLLE Storage Panels","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication External MOLLE Storage Panels are steel rear-window panels designed for the 2025+ Toyota 4Runner (6th Gen) that bolt onto a Rago roof rack and seal to the rear windows with heavy-duty RAM Mount suction cups, giving overlanders a rattle-free external mounting surface for fire extinguishers, recovery gear, fuel containers, and hand tools. Available as a driver panel, a passenger panel, or a pair.\u003c\/p\u003e\n\n\u003ch2\u003eGear Where You Need It, Outside the Cab\u003c\/h2\u003e\n\u003cp\u003eMoving supplies to the exterior of the 4Runner keeps the cabin clear and puts trail-critical gear within arm's reach the moment you stop. Fire extinguishers, recovery straps, and shovels mount to the MOLLE grid without consuming interior or bed space that's already spoken for on a loaded rig.\u003c\/p\u003e\n\n\u003ch2\u003eA Mounting System That Grows With Your Build\u003c\/h2\u003e\n\u003cp\u003eThe panels are compatible with the full range of standard MOLLE accessories and attachment systems, so the same hardware that works on a pack or a cab panel works here. Integrated mounting points accept Rotopax fuel and water containers directly, without adapters. Dedicated slots support carriage bolt mounting for shovels, axes, and long-handled tools. Three attachment methods on one panel means the loadout can change trip to trip without modifying the panel itself.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to Stay Put on the Trail\u003c\/h2\u003e\n\u003cp\u003eEach panel is fabricated from durable steel and finished in a two-stage hammer black powder coat. The bolt-on connection to the Rago roof rack handles the structural load, while two RAM Mount suction cups per panel seal against the rear glass to eliminate rattle and flex over rough terrain. The result is a panel that feels integrated with the vehicle rather than bolted on as an afterthought.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMOLLE grid design:\u003c\/strong\u003e compatible with standard MOLLE accessories and attachment systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRotopax integration:\u003c\/strong\u003e integrated mounting points accept Rotopax fuel and water container mounts directly\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCarriage bolt slots:\u003c\/strong\u003e dedicated slots for mounting shovels, axes, and long-handled tools\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRAM Mount suction cups:\u003c\/strong\u003e two heavy-duty suction cups included per panel for rattle-free window seal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSteel construction:\u003c\/strong\u003e durable steel with a two-stage hammer black powder coat finish\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBolt-on installation:\u003c\/strong\u003e mounts directly to Rago 6th Gen 4Runner roof racks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003ePair\u003c\/th\u003e\n      \u003cth\u003eDriver\u003c\/th\u003e\n      \u003cth\u003ePassenger\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC7107601NA\u003c\/td\u003e\n      \u003ctd\u003eAC7108201NA\u003c\/td\u003e\n      \u003ctd\u003eAC7108301NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e42 lb\u003c\/td\u003e\n      \u003ctd\u003e21 lb\u003c\/td\u003e\n      \u003ctd\u003e21 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd colspan=\"3\"\u003eDurable steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd colspan=\"3\"\u003eTwo-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded hardware\u003c\/td\u003e\n      \u003ctd colspan=\"3\"\u003e2 RAM Mount suction cups per panel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle fitment\u003c\/td\u003e\n      \u003ctd colspan=\"3\"\u003e2025+ Toyota 4Runner (6th Gen)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRequired accessory\u003c\/td\u003e\n      \u003ctd colspan=\"3\"\u003eRago 6th Gen 4Runner Roof Rack (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese panels suit 2025+ Toyota 4Runner (6th Gen) owners who have already installed a Rago roof rack (or are building toward one) and want to add external MOLLE storage for overlanding and off-road use without sacrificing interior or bed space.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese panels will not install on any vehicle other than the 2025+ Toyota 4Runner (6th Gen), and they cannot be mounted without a compatible Rago 6th Gen 4Runner Roof Rack, which is sold separately. MOLLE accessories, Rotopax containers, and carriage bolt tools are not included.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs a Rago roof rack required to install these panels?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication External MOLLE Storage Panels bolt directly onto a Rago 6th Gen 4Runner Roof Rack, which is sold separately. The panels cannot be installed without a compatible Rago rack already in place on the 2025+ Toyota 4Runner.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat MOLLE accessories will fit these panels?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe External MOLLE Storage Panels are compatible with standard MOLLE accessories and attachment systems. Any pouches, holsters, or mounts designed for a standard MOLLE grid will attach. Rotopax fuel and water container mounts attach at the integrated Rotopax mounting points specifically.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow do the panels stay secure against the rear windows?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach panel includes two heavy-duty RAM Mount suction cups that seal against the rear glass. Combined with the bolt-on connection to the Rago roof rack, the suction cups eliminate rattle and flex, keeping the panel stable over rough terrain without drilling into the vehicle body.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan I purchase a single panel rather than a pair?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication External MOLLE Storage Panels are available as a driver-side panel, a passenger-side panel, or as a pair. Each single panel weighs 21 lb and includes its own two RAM Mount suction cups.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat tools or hardware are included for mounting shovels and axes?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe panels include dedicated slots designed for carriage bolt mounting of shovels, axes, and similar long-handled tools. Carriage bolts and the tools themselves are not included; the slots are sized to accept standard carriage bolt hardware.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Pair","offer_id":50621737992262,"sku":"AC7107601NA","price":429.99,"currency_code":"USD","in_stock":true},{"title":"Driver","offer_id":50621738025030,"sku":"AC7108201NA","price":237.99,"currency_code":"USD","in_stock":true},{"title":"Passenger","offer_id":50621738057798,"sku":"AC7108301NA","price":237.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/6th-gen-4Runner-External-Molle-Storage-Panels-sq.jpg?v=1791937951"},{"product_id":"rago-fabrication-lp6-round-light-mount-for-toyota-roof-racks","title":"Rago Fabrication LP6 Round Light Mount for Toyota Roof Racks","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication LP6 Round Light Mount is a bolt-on aluminum bracket designed to add up to six Baja Designs LP6 Round Lights to Rago Fabrication Toyota roof racks. Its low-profile design keeps the roofline clean, and integrated wire management routes cabling without exposed runs. The mount is compatible with both Rago Solid Front Fairing and Light Pocket Toyota roof rack configurations.\u003c\/p\u003e\n\n\u003ch2\u003eLow-Profile Fit That Keeps the Rack Clean\u003c\/h2\u003e\n\u003cp\u003eThe LP6 Round Light Mount sits close to the rack's existing profile rather than adding bulk above it. For overlanders who have invested in a purpose-built roof rack, a mount that preserves the rack's visual line matters. Gear stacked high catches wind and draws attention on the road. The low-profile geometry means the lights integrate with the rack rather than sitting on top of it as an afterthought.\u003c\/p\u003e\n\n\u003ch2\u003eIntegrated Wire Management\u003c\/h2\u003e\n\u003cp\u003eRouting wiring on a roof rack without a dedicated channel typically means zip ties, exposed runs, and eventual chafing against metal edges. The LP6 Round Light Mount includes integrated wire management, so cabling for up to six LP6 lights has a defined path from the mount to the cab entry point. Cleaner routing also simplifies troubleshooting if a light circuit needs attention down the road.\u003c\/p\u003e\n\n\u003ch2\u003eBolt-On Installation, No Fabrication Required\u003c\/h2\u003e\n\u003cp\u003eThe LP6 Round Light Mount installs fully bolt-on to compatible Rago Fabrication Toyota roof racks: no drilling, welding, or modification to the rack is required. Aluminum construction keeps the mount lightweight without sacrificing the rigidity needed to hold six lights securely at highway speed and over rough terrain. The satin black powder coat finish resists corrosion and matches the finish used across Rago's Toyota rack lineup.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e mounts up to six Baja Designs LP6 Round Lights\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e durable and lightweight aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e satin black powder coat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire management:\u003c\/strong\u003e integrated routing channel for light cabling\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e fully bolt-on, no modification to the rack required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e low-profile design preserves the rack's roofline\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eSatin black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLight capacity\u003c\/td\u003e\n      \u003ctd\u003eUp to 6 × Baja Designs LP6 Round Lights\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eFully bolt-on\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatibility\u003c\/td\u003e\n      \u003ctd\u003eRago Fabrication Toyota Roof Racks (Solid Front Fairing and Light Pocket configurations)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC710910301\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe LP6 Round Light Mount suits Toyota owners who have already installed or are building a Rago Fabrication roof rack and want to run up to six Baja Designs LP6 Round Lights in a clean, integrated configuration with managed wiring.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis mount fits only Rago Fabrication Toyota roof racks and is not a universal roof rack light mount. Baja Designs LP6 Round Lights are not included and must be purchased separately. This mount is designed specifically for the LP6 Round form factor and is not confirmed for other Baja Designs light sizes or shapes.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eAre the Baja Designs LP6 lights included with this mount?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe LP6 Round Light Mount does not include Baja Designs LP6 Round Lights. The mount holds up to six LP6 Round Lights, which must be purchased separately. Only the mounting bracket itself is included in this listing.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhich Rago Fabrication roof racks is this mount compatible with?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe LP6 Round Light Mount is compatible with Rago Fabrication Toyota roof racks, including both the Solid Front Fairing and Light Pocket configurations. Fitment with Rago racks built for other vehicle platforms is not confirmed.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat Toyota models and years does this mount fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eFitment for the LP6 Round Light Mount depends on the specific Rago Fabrication Toyota roof rack it is installed on. The mount itself is listed as compatible with Rago Toyota roof racks broadly; confirm the correct rack for your Toyota make, model, and year before ordering this mount.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes installation require drilling or modifying the roof rack?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe LP6 Round Light Mount installs fully bolt-on to compatible Rago Fabrication Toyota roof racks. No drilling, welding, or permanent modification to the rack is required. An install guide is available from Rago Fabrication for step-by-step instructions.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the mount made from, and how is it finished?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe LP6 Round Light Mount is constructed from aluminum for a lightweight and durable build. It is finished in a satin black powder coat that resists corrosion and matches the finish used across Rago Fabrication's Toyota roof rack lineup.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621739073606,"sku":"AC710910301","price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/4Runner-Tacoma-Baja-Designs-Roof-Rack-Light-Mount-Offtruck-1-sq.jpg?v=1791937981"},{"product_id":"rago-fabrication-2022-toyota-tundra-rear-bumper","title":"Rago Fabrication 2022+ Toyota Tundra Rear Bumper","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Rear Bumper for the 2022+ Toyota Tundra (3rd Gen) is a low-profile steel bumper built for off-road use, offering two integrated pod light mounts and full retention of the factory parking sensors and blind spot monitoring. It is available in two configurations: Standard, which includes two 1-inch thick D-ring mounts for vehicle recovery, and No D-Rings for a cleaner profile. Both variants are finished in a dual-stage hammer black powder coat and made in the USA.\u003c\/p\u003e\n\n\u003ch2\u003eLow-Profile Design for Real Clearance Gains\u003c\/h2\u003e\n\u003cp\u003eThe Tundra Rear Bumper's low-profile geometry reduces the overhang at the rear of the truck, which directly improves departure angle when cresting ledges, descending steep trails, or navigating rock gardens. A factory-height bumper that catches on terrain can stop a run or cause damage; a lower profile keeps the rear end moving through obstacles that would otherwise hang the truck up. The difference is most noticeable on technical trails where rear-end clearance is the limiting factor.\u003c\/p\u003e\n\n\u003ch2\u003ePod Light Mounts Built Into the Bumper\u003c\/h2\u003e\n\u003cp\u003eTwo dedicated mounts sized for Baja Designs S2 or RIGID SR-M pod lights are integrated into the bumper structure, not bolted on as an afterthought. Mounting lights at bumper height puts the beam low and wide, cutting through dust and illuminating the ground directly behind the truck during camp setup, reversing on dark trails, or backing a trailer. Because the mounts are part of the bumper itself, there is no separate bracket to source or fabricate.\u003c\/p\u003e\n\n\u003ch2\u003eOEM Sensors Retained, Steel Construction Throughout\u003c\/h2\u003e\n\u003cp\u003eThe bumper is engineered to retain the Tundra's factory parking sensors and blind spot monitoring system, so the truck's driver-assist features continue to function after installation. The steel construction resists the impacts, scrapes, and abrasion that come with off-road use, and the dual-stage hammer black powder coat finish provides a durable, corrosion-resistant surface. Rago Fabrication builds this bumper in the USA.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow-profile fitment:\u003c\/strong\u003e reduces rear overhang to improve departure angle off-road\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo pod light mounts:\u003c\/strong\u003e compatible with Baja Designs S2 or RIGID SR-M pod lights\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptional 1-inch D-ring mounts:\u003c\/strong\u003e included on the Standard variant for vehicle recovery rigging\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM sensor retention:\u003c\/strong\u003e retains factory parking sensors and blind spot monitoring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-stage hammer black powder coat:\u003c\/strong\u003e durable, corrosion-resistant finish\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e built by Rago Fabrication\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eStandard (with D-Rings)\u003c\/th\u003e\n      \u003cth\u003eNo D-Rings\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd colspan=\"2\"\u003e2022+ Toyota Tundra (3rd Gen)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eR7602350901NA\u003c\/td\u003e\n      \u003ctd\u003eR7602850901NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd colspan=\"2\"\u003eSteel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd colspan=\"2\"\u003eDual-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePod Light Mounts\u003c\/td\u003e\n      \u003ctd colspan=\"2\"\u003e2 (Baja Designs S2 \/ RIGID SR-M compatible)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eD-Ring Mounts\u003c\/td\u003e\n      \u003ctd\u003e2 × 1-inch thick\u003c\/td\u003e\n      \u003ctd\u003eNone\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e63 lb\u003c\/td\u003e\n      \u003ctd\u003e60 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOEM Sensor Retention\u003c\/td\u003e\n      \u003ctd colspan=\"2\"\u003eParking sensors and blind spot monitoring\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd colspan=\"2\"\u003eUSA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation Note\u003c\/td\u003e\n      \u003ctd colspan=\"2\"\u003eSome trimming required\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis bumper suits 2022+ Toyota Tundra (3rd Gen) owners who run off-road trails and want improved departure-angle clearance, integrated pod light positions, and the option to add recovery D-rings, with full retention of factory parking sensors and blind spot monitoring.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis bumper does not fit Tundra model years before 2022 or any other vehicle. It does not include a winch mount. Installation requires some trimming, so it is not a drop-in replacement for buyers expecting a no-modification fit. The No D-Rings variant does not include recovery attachment points.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Tundra model years does this bumper fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Rear Bumper is designed for the 2022 and newer Toyota Tundra (3rd Gen). It does not fit earlier Tundra generations. If your truck is a pre-2022 model, this bumper is not compatible.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between the Standard and No D-Rings variants?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Standard variant includes two 1-inch thick D-ring mounts for attaching recovery straps or shackles, and weighs 63 lb. The No D-Rings variant omits those mounts for a cleaner rear profile and weighs 60 lb. Both variants are otherwise identical in construction, finish, and pod light mounting.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat pod lights are compatible with the bumper's light mounts?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe two integrated pod light mounts on this Tundra rear bumper are sized for Baja Designs S2 or RIGID SR-M pod lights. Pod lights are not included with the bumper and are sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill my factory parking sensors and blind spot monitoring still work after installation?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication Tundra Rear Bumper is engineered to retain the factory parking sensors and blind spot monitoring system, so those driver-assist features remain functional after the bumper is installed.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes installation require cutting or trimming?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. Some trimming is required to install this rear bumper on the 2022+ Tundra. Buyers who are not comfortable with that step should plan for professional installation.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the bumper made of and how is it finished?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Tundra Rear Bumper is constructed from steel and finished in a dual-stage hammer black powder coat, which provides a durable, corrosion-resistant surface suited to off-road and outdoor use.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Standard","offer_id":50621742022726,"sku":"R7602350901NA","price":1299.99,"currency_code":"USD","in_stock":true},{"title":"No D-Rings","offer_id":50621742055494,"sku":"R7602850901NA","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2022-2025ToyotaTundraRearBumper-sq.jpg?v=1791938118"},{"product_id":"rago-fabrication-2022-toyota-tundra-center-mount-winch-front-bumper","title":"Rago Fabrication 2022+ Toyota Tundra Center Mount Winch Front Bumper","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Center Mount Winch Front Bumper is a steel replacement front bumper for the 2022 and newer Toyota Tundra (3rd Gen) that adds a hidden winch mount, three light bar mounting positions, and a pair of 1-inch-thick D-ring recovery points while retaining the factory front camera, parking sensors, Toyota Safety Sense, and fog lights. The bumper ships in a single variant and fits most Tundra trims; see fitment notes below for excluded trims and the Hybrid condition.\u003c\/p\u003e\n\n\u003ch2\u003eLow-Profile Steel Construction for Real Approach Clearance\u003c\/h2\u003e\n\u003cp\u003eThe bumper is built from steel and finished in a dual-stage hammer black powder coat. Its low-profile design keeps the front face closer to the factory envelope than a full-width tube bumper, which translates directly to a shallower approach angle when climbing ledges or cresting steep off-camber terrain. That extra clearance can be the difference between a clean line and a hung-up front end. The steel construction adds front-end mass that absorbs trail impacts without deforming, protecting the radiator, intercooler, and chassis rails behind it.\u003c\/p\u003e\n\n\u003ch2\u003eThree Light Mounts and a Hidden Winch Mount Ready at the Same Time\u003c\/h2\u003e\n\u003cp\u003eThe bumper integrates a 30-inch single-row light bar mount in the center, a 20-inch single-row light bar mount in the grille opening, and two 3-inch pod light mounts. All three positions can be populated simultaneously without adapters or fabrication. Buyers who run a full lighting setup can fill every position from a single bumper. The winch mount is hidden behind the bumper face, keeping the front profile clean when a winch is not installed and protecting the winch from direct trail debris when it is. Two 1-inch-thick D-ring mounts are included for vehicle recovery, giving both a mechanical winch pull and a static strap point from the same bumper.\u003c\/p\u003e\n\n\u003ch2\u003eFactory Driver-Assist Technology Stays Active\u003c\/h2\u003e\n\u003cp\u003eReplacing a front bumper on a modern Tundra can disable the adaptive cruise control radar, front camera, parking sensors, and fog lights if the new bumper does not account for their mounting locations. This bumper is designed to retain all of those systems: the OEM front camera, parking sensors, Toyota Safety Sense (including the ACC radar), and fog lights. The truck's driver-assist features are intended to remain functional after installation. Buyers who rely on Toyota Safety Sense daily do not need to choose between trail capability and factory safety tech.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHidden center winch mount:\u003c\/strong\u003e heavy-duty, concealed behind the bumper face\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThree light bar positions:\u003c\/strong\u003e 30-inch center mount, 20-inch grille mount, and two 3-inch pod light mounts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1-inch-thick D-ring mounts:\u003c\/strong\u003e pair included for recovery strap and shackle attachment\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory system retention:\u003c\/strong\u003e OEM front camera, parking sensors, Toyota Safety Sense, and fog lights all retained\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-stage hammer black powder coat:\u003c\/strong\u003e applied over steel construction\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eMade in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2022+ Toyota Tundra (3rd Gen, see fitment notes for excluded trims)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eSteel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eDual-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e72 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWinch Mount\u003c\/td\u003e\n      \u003ctd\u003eHidden heavy-duty center mount\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLight Bar Mounts\u003c\/td\u003e\n      \u003ctd\u003e(1) 30-inch single-row center, (1) 20-inch single-row grille\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePod Light Mounts\u003c\/td\u003e\n      \u003ctd\u003e(2) 3-inch\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eD-Ring Mounts\u003c\/td\u003e\n      \u003ctd\u003ePair, 1-inch thick\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFactory Skid Plate\u003c\/td\u003e\n      \u003ctd\u003eNot retained; optional 3\/16-inch aluminum skid plate sold separately\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOrigin\u003c\/td\u003e\n      \u003ctd\u003eMade in the USA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eF7603622001NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis bumper suits 2022 and newer Toyota Tundra owners on most trims who want to add winch recovery capability, a full complement of auxiliary lighting positions, and D-ring recovery points without disabling factory driver-assist systems. It is a strong fit for overlanders and off-road drivers who need a functional, low-profile front end that can carry a winch and lights simultaneously.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe bumper does not fit the Limited i-FORCE MAX, Platinum i-FORCE MAX, 1794 Edition i-FORCE MAX, TRD Pro, or Capstone trims. Hybrid trim compatibility requires the Hybrid Active Front Spoiler Delete, sold separately. The bumper does not retain the factory front skid plate; the optional 3\/16-inch aluminum skid plate is a separate purchase. Installation requires cutting, and professional installation is advisable for buyers not comfortable with that process.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich 2022+ Tundra trims does this bumper fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Tundra Center Mount Winch Front Bumper fits most 2022 and newer Toyota Tundra (3rd Gen) trims. It is not compatible with the Limited i-FORCE MAX, Platinum i-FORCE MAX, 1794 Edition i-FORCE MAX, TRD Pro, or Capstone trims. Hybrid trim fitment requires the Hybrid Active Front Spoiler Delete, which is sold separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the bumper come with a winch, lights, or D-ring shackles?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication front bumper includes the winch mount and the pair of 1-inch-thick D-ring mounts as part of the bumper assembly. A winch, light bars, pod lights, and D-ring shackles are not included and must be sourced separately. The bumper is designed to accept a standard center-mount winch and all three light bar positions simultaneously.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes installing this bumper require cutting?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. Cutting is required to install the Rago Fabrication Tundra Center Mount Winch Front Bumper. Buyers who are not comfortable with cutting during installation should plan for professional installation.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill factory parking sensors, the front camera, and Toyota Safety Sense still work after installation?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Tundra front bumper is designed to retain the OEM front camera, parking sensors, Toyota Safety Sense (including adaptive cruise control), and factory fog lights. These systems are intended to remain fully functional after the bumper is installed, provided installation is completed correctly.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the bumper include or retain the factory front skid plate?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Tundra Center Mount Winch Front Bumper does not retain the factory front skid plate. An optional 3\/16-inch aluminum front skid plate designed for this bumper is available separately for buyers who want undercarriage protection.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621742153798,"sku":"F7603622001NA","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/3rd-Gen-Tundra-Center-Mount-Winch-Front-Bumper-sq.jpg?v=1791938126"},{"product_id":"rago-fabrication-2022-toyota-tundra-front-skid-plate","title":"Rago Fabrication 2022+ Toyota Tundra Front Skid Plate","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication 2022+ Toyota Tundra Front Skid Plate is a 3\/16-inch aluminum skid designed to protect the front undercarriage of third-generation Tundras from rocks, shrubs, and trail debris. Weighing 20 lb, it mounts directly to Rago Fabrication's Center Mount Winch Front Bumper, which is sold separately and required for installation. It is not compatible with Limited i-FORCE MAX, Platinum i-FORCE MAX, 1794 Edition i-FORCE MAX, TRD Pro, or Capstone trim levels.\u003c\/p\u003e\n\n\u003ch2\u003eTrail-Ready Undercarriage Protection\u003c\/h2\u003e\n\u003cp\u003eThe front undercarriage of a third-generation Tundra carries components that are expensive to repair and difficult to reach after damage has already occurred. The Rago Fabrication Front Skid Plate places a 3\/16-inch aluminum barrier between those components and the rocks, ledges, and debris a trail puts in the way. Aluminum at this thickness absorbs glancing impacts and deflects smaller obstacles without the weight penalty of steel, so the truck's front-end balance and approach angle are not meaningfully affected.\u003c\/p\u003e\n\n\u003ch2\u003eA Finish Built for Repeated Trail Use\u003c\/h2\u003e\n\u003cp\u003eThe skid plate is finished in a satin black powder coat that resists corrosion, abrasion, and the kind of surface wear that comes from repeated contact with brush and rock. A durable finish on a skid plate matters because the coating is the first line of defense against rust once the aluminum surface is scratched. On a skid plate, surface contact is expected, not accidental.\u003c\/p\u003e\n\n\u003ch2\u003eIntegrated Fitment with the Rago Center Mount Winch Front Bumper\u003c\/h2\u003e\n\u003cp\u003eThis skid plate is engineered specifically to mount to Rago Fabrication's Center Mount Winch Front Bumper for the third-generation Tundra. That integration means the skid aligns correctly with the bumper's geometry and provides continuous coverage across the front-end profile the bumper establishes. A universal or aftermarket skid not designed for this bumper would leave gaps in coverage or require modification to fit.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3\/16-inch aluminum construction:\u003c\/strong\u003e lightweight and impact-resistant material sized for trail use\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSatin black powder coat finish:\u003c\/strong\u003e corrosion- and abrasion-resistant surface treatment\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesigned for Rago's Center Mount Winch Front Bumper:\u003c\/strong\u003e mounts directly to that bumper, sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThird-generation Tundra fitment:\u003c\/strong\u003e fits 2022 and newer Toyota Tundra (select trims, see compatibility note)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003e3\/16-inch aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eSatin black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e20 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2022+ Toyota Tundra (3rd Gen)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncompatible Trims\u003c\/td\u003e\n      \u003ctd\u003eLimited i-FORCE MAX, Platinum i-FORCE MAX, 1794 Edition i-FORCE MAX, TRD Pro, Capstone\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRequired Companion Part\u003c\/td\u003e\n      \u003ctd\u003eRago Fabrication Center Mount Winch Front Bumper (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC7606903NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis skid plate suits 2022 and newer Toyota Tundra owners who have already purchased or are purchasing Rago Fabrication's Center Mount Winch Front Bumper and want integrated front undercarriage protection for off-road and overlanding use on trails with rock, brush, and debris hazards.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis skid plate does not fit Tundra trims designated Limited i-FORCE MAX, Platinum i-FORCE MAX, 1794 Edition i-FORCE MAX, TRD Pro, or Capstone. It cannot be installed without the Rago Fabrication Center Mount Winch Front Bumper. It is not a standalone or universal skid plate and will not mount to the factory bumper or other aftermarket bumpers.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this skid plate work with the factory Tundra bumper or other aftermarket bumpers?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication 2022+ Tundra Front Skid Plate is designed exclusively to mount to Rago Fabrication's Center Mount Winch Front Bumper for the third-generation Tundra. It is not compatible with the factory bumper or other aftermarket bumpers.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Tundra trims are not compatible with this skid plate?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Tundra Front Skid Plate is not compatible with the following 2022+ Tundra trims: Limited i-FORCE MAX, Platinum i-FORCE MAX, 1794 Edition i-FORCE MAX, TRD Pro, and Capstone. Buyers with these trims should confirm compatibility before purchasing.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the skid plate made of, and how does it hold up to impacts?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Tundra Front Skid Plate is constructed from 3\/16-inch aluminum, a material that balances impact resistance with low weight. The satin black powder coat finish adds a layer of corrosion and abrasion resistance to handle repeated contact with rocks and trail debris.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs the Rago Center Mount Winch Front Bumper included with this skid plate?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Center Mount Winch Front Bumper is not included with this skid plate and is sold separately. The skid plate mounts to that bumper and cannot be installed without it. Buyers who do not already own the bumper will need to purchase it before this skid plate can be fitted.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621744676934,"sku":"AC7606903NA","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2022_-Toyota-Tundra-Front-Skid-Plate-for-Center-Mount-Front--sq_e8865919-b54f-4a55-864d-603da9b90a2e.jpg?v=1791938241"},{"product_id":"rago-fabrication-6th-gen-4runner-rear-molle-panel-system-pair","title":"Rago Fabrication 6th Gen 4Runner Rear MOLLE Panel System, Pair","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Rear MOLLE Panel System is a pair of steel, powder-coated cargo panels designed for the 2025+ Toyota 4Runner (6th generation) that bolt to four factory-adjacent install points inside the rear cargo area, giving overlanders and off-road drivers a structured, rattle-free surface for mounting tools, pouches, recovery gear, and other accessories directly to the rear windows.\u003c\/p\u003e\n\n\u003ch2\u003eOrganized Gear Within Reach\u003c\/h2\u003e\n\u003cp\u003eMOLLE webbing opens up the rear cargo area to a wide range of attachment hardware: bolts, straps, zip ties, Quick Fist mounts, and other tactical fasteners all work with the grid. That flexibility means a med-kit, fire extinguisher, air hose, or knife sheath can each go exactly where it makes sense for your kit rather than sliding loose in the cargo floor. Keeping critical gear mounted and visible saves time at the trailhead and reduces the chance of leaving something behind.\u003c\/p\u003e\n\n\u003ch2\u003eFour-Point Mounting for a Rattle-Free Ride\u003c\/h2\u003e\n\u003cp\u003eEach panel mounts at four install points, distributing load across the structure so gear stays put on washboard roads and rocky terrain. A panel that flexes or rattles under load is a distraction and a potential source of damage to whatever is mounted on it; the four-point design addresses both. The panels follow the factory lines of the 4Runner's rear windows, so the finished installation reads as intentional rather than aftermarket.\u003c\/p\u003e\n\n\u003ch2\u003eDual-Stage Hammer Black Powder Coat\u003c\/h2\u003e\n\u003cp\u003eThe finish is a dual-stage hammer black powder coat applied over steel construction. Powder coat provides a harder, more impact-resistant surface than paint, which matters in a cargo area where gear shifts during transit. The hammer texture also reduces visible scuffs from regular use. The black finish is chosen to complement the 4Runner's factory interior trim rather than contrast with it.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMOLLE webbing grid:\u003c\/strong\u003e compatible with bolts, straps, zip ties, Quick Fist mounts, and other tactical attachment systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFour install points per panel:\u003c\/strong\u003e rigid mounting that resists flex and rattle on rough terrain\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-stage hammer black powder coat:\u003c\/strong\u003e applied over steel for durability and interior color match\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory window line profile:\u003c\/strong\u003e panels follow the 4Runner's rear window contour for a clean, integrated look\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold as a pair:\u003c\/strong\u003e left and right panels included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptional shelf compatibility:\u003c\/strong\u003e designed to pair with the Rago Fabrication Molle Storage Shelf (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2025+ Toyota 4Runner (6th generation)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eSteel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eDual-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstall Points\u003c\/td\u003e\n      \u003ctd\u003e4 per panel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eQuantity\u003c\/td\u003e\n      \u003ctd\u003ePair (left and right)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eRequires drilling and riv-nuts\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e22 lb (shipping weight)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese panels suit 2025+ Toyota 4Runner (6th generation) owners who want a permanent, structured MOLLE storage solution in the rear cargo area for overlanding, off-road driving, or vehicle-based camping where quick access to mounted gear matters.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese panels do not fit any 4Runner generation prior to the 2025 6th generation, and they do not fit any other vehicle make or model. Installation requires drilling and riv-nut installation; buyers seeking a no-drill or reversible solution should not purchase these panels. The compatible Rago Fabrication Molle Storage Shelf and any dome lights are sold separately and are not included.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes installation require any drilling?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication Rear MOLLE Panel System requires drilling and riv-nut installation to mount securely at the four install points. Buyers who are not comfortable with this type of installation should plan for professional installation before purchasing.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs this a pair, or do I need to buy each panel separately?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Rear MOLLE Panel System is sold as a pair. One left panel and one right panel are included in a single purchase. No additional panel purchase is needed to cover both rear cargo windows.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat attachment hardware works with the MOLLE grid?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe MOLLE panels are compatible with bolts, straps, zip ties, Quick Fist mounts, and other standard tactical attachment solutions. This covers a wide range of pouches, tool holders, knife sheaths, air hose mounts, fire extinguisher brackets, and recovery gear organizers designed for MOLLE webbing.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan I add a storage shelf to these panels?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Rear MOLLE Panel System is designed to pair with the Rago Fabrication Molle Storage Shelf, which is sold separately. Adding the shelf extends the usable cargo storage area in the 4Runner's rear compartment beyond what the panels alone provide.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill these panels fit earlier 4Runner generations?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Rago Fabrication Rear MOLLE Panel System is designed specifically for the 2025+ Toyota 4Runner (6th generation). The panels follow the factory window lines of the 6th gen body, and fitment has not been stated for any prior 4Runner generation.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621744906310,"sku":"AC7102801NA","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/6th-gen-4Runner-Rear-Molle-Storage-Panel-System-Pair-sq.jpg?v=1791938261"},{"product_id":"rago-fabrication-2025-toyota-4runner-molle-panel-storage-shelf","title":"Rago Fabrication 2025+ Toyota 4Runner MOLLE Panel Storage Shelf","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication MOLLE Panel Storage Shelf adds a dual-zone cargo platform to the rear cargo area of the 2025+ Toyota 4Runner (6th Gen), mounting directly to Rago's Rear Window MOLLE Storage Panel System. Heavy-duty steel construction and a dual-stage hammer black powder coat finish make it a durable, purpose-built addition to a fully built rig or a work-in-progress build.\u003c\/p\u003e\n\n\u003ch2\u003eTwo Usable Surfaces, One Shelf\u003c\/h2\u003e\n\u003cp\u003eThe shelf creates cargo space above and below a single footprint. The top surface holds bulkier gear: sleeping bags, blankets, duffel bags, straps, and storage boxes. The underside features a full MOLLE panel grid for mounting pouches, med-kits, knife sheaths, and tools. Keeping frequently accessed small items on the underside and larger gear on top means less digging through a pile when you need something quickly at camp or on the trail.\u003c\/p\u003e\n\n\u003ch2\u003eAdjustable Height for Changing Loads\u003c\/h2\u003e\n\u003cp\u003eThe shelf's mounting height adjusts along Rago's Rear Window MOLLE Panel System, so the split between above-shelf and below-shelf space can shift to match what you're carrying on a given trip. A setup optimized for a long-haul overlanding kit can be reconfigured for a weekend car-camping load without removing the shelf entirely. Raised edges on the front and back lip keep gear from sliding off during movement on rough terrain or during hard braking.\u003c\/p\u003e\n\n\u003ch2\u003eBroad Attachment Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe shelf works with straps, bolts, Quick Fist mounts, zip ties, and any other MOLLE-compatible attachment system for securing gear both above and below the surface. That range of compatible hardware means the shelf integrates with accessories already in a typical overlanding kit rather than requiring proprietary fasteners. Fabricated in Chandler, Arizona, and finished in a dual-stage hammer black powder coat, the shelf is built to the same standard as the rest of the Rago Fabrication lineup.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-zone storage:\u003c\/strong\u003e MOLLE panel grid on the underside; open top surface for larger gear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustable mounting height:\u003c\/strong\u003e repositions along Rago's Rear Window MOLLE Panel System to suit different load configurations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRaised front and rear edges:\u003c\/strong\u003e keep gear in place during off-road driving\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBroad attachment compatibility:\u003c\/strong\u003e works with straps, bolts, Quick Fists, zip ties, and MOLLE-compatible systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavy-duty steel construction:\u003c\/strong\u003e dual-stage hammer black powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2025+ Toyota 4Runner (6th Gen)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eHeavy-duty steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eDual-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e38 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC7103001NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eRequired accessory (sold separately):\u003c\/strong\u003e Rago Fabrication Rear Window MOLLE Storage Panel System for the 2025+ Toyota 4Runner. The shelf cannot be installed without it.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis shelf suits 2025+ Toyota 4Runner (6th Gen) owners who want to maximize organized cargo storage in the rear of their rig, particularly overlanders and off-road drivers who already run or plan to install Rago's Rear Window MOLLE Storage Panel System and want a dedicated surface for both large gear and MOLLE-mounted accessories.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe shelf does not fit any 4Runner generation prior to the 2025 6th Gen, and it cannot be installed without Rago's Rear Window MOLLE Storage Panel System, which is sold separately. It is not a freestanding shelf and does not mount to any other brand's MOLLE panel system.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this shelf include the MOLLE panels it mounts to?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication MOLLE Panel Storage Shelf does not include the Rear Window MOLLE Storage Panel System. The panel system is a required, separately purchased accessory; the shelf cannot be installed without it. Both are available on TerrainVault.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhich 4Runner years and generations does this shelf fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication MOLLE Panel Storage Shelf is designed specifically for the 2025+ Toyota 4Runner, which is the 6th generation. It does not fit 5th Gen or earlier 4Runner models.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat can I store on top of the shelf?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe top surface of the Rago Fabrication MOLLE Panel Storage Shelf is designed to hold larger items such as sleeping bags, blankets, duffel bags, straps, and storage boxes. Raised edges on the front and rear keep gear from sliding off during driving.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat can I attach to the underside of the shelf?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe underside of the Rago Fabrication MOLLE Panel Storage Shelf features a MOLLE panel grid compatible with pouches, med-kits, knife sheaths, tools, and any other MOLLE-compatible accessory. Straps, bolts, Quick Fist mounts, and zip ties all work with the grid.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan I adjust how high or low the shelf sits?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication MOLLE Panel Storage Shelf has an adjustable mounting height along the Rear Window MOLLE Panel System, so the amount of space above and below the shelf can be changed to suit different gear configurations or trip types.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the shelf made of and how is it finished?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication MOLLE Panel Storage Shelf is constructed from heavy-duty steel and finished in a dual-stage hammer black powder coat. It is fabricated in Chandler, Arizona.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621748412486,"sku":"AC7103001NA","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/6th-Gen-4Runner-Molle-Panel-Storage-Shelf-sq.jpg?v=1791938368"},{"product_id":"rago-fabrication-6th-gen-4runner-center-console-molle-panels","title":"Rago Fabrication 6th Gen 4Runner Center Console MOLLE Panels","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Center Console MOLLE Panels are a driver-and-passenger-side steel panel pair designed for the 2025+ Toyota 4Runner (6th generation, automatic transmission only), bringing MOLLE-compatible gear organization and AMPS-standard device mounting within arm's reach of both front seats. The panels follow the factory console lines for a clean, integrated appearance and retain full access to OEM handles, controls, the charging station, and cup holders.\u003c\/p\u003e\n\n\u003ch2\u003eArm's-Reach Gear Organization\u003c\/h2\u003e\n\u003cp\u003eMounting knives, multi-tools, pouches, radios, and holsters on the center console puts critical gear exactly where a driver or passenger can reach it without turning around or opening a bag. The MOLLE grid accepts straps, bolts, and zip-ties alongside any standard MOLLE-compatible attachment system, so the same panels work whether the priority is medical pouches one trip or radio holsters the next. Because both a driver-side and a passenger-side panel are included, each occupant has dedicated real estate for their own loadout.\u003c\/p\u003e\n\n\u003ch2\u003eIntegrated Device-Mount System\u003c\/h2\u003e\n\u003cp\u003ePEM nuts threaded for 10-24 bolts are located on top of both panels, providing solid anchor points for phone, tablet, and GPS mounts without additional drilling at those locations. The accessory mounting holes follow the AMPS standard at 1.9-inch \/ 48.5 mm spacing, making the panels directly compatible with Ram Diamond Base Mounts, Bulletpoint Mounting Solutions, and Quad Lock Systems and Base Plates. A secure, vibration-resistant device mount at console height keeps navigation and communication tools visible without blocking sightlines through the windshield.\u003c\/p\u003e\n\n\u003ch2\u003eFactory-Line Fit, Full Feature Access\u003c\/h2\u003e\n\u003cp\u003eThe panels are designed to closely follow the factory contours of the 6th generation 4Runner center console, avoiding the bulky look of universal-fit solutions. Installation does require some drilling, and the result retains complete access to the factory handles, controls, charging station, and cup holders. The dual-stage hammer black powder coat finish matches the texture and durability expected of interior components that see daily handling.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDriver and Passenger Side Pair:\u003c\/strong\u003e both panels included, giving each front-seat occupant dedicated MOLLE storage space\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMOLLE-Compatible Grid:\u003c\/strong\u003e accepts straps, bolts, zip-ties, and standard MOLLE attachment systems for knives, pouches, radios, holsters, and more\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAMPS-Standard Accessory Holes:\u003c\/strong\u003e 1.9-inch \/ 48.5 mm spacing compatible with Ram Diamond Base Mounts, Bulletpoint Mounting Solutions, and Quad Lock Systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePEM Nuts for 10-24 Bolts:\u003c\/strong\u003e integrated on top of both panels for secure device-mount attachment\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRetains OEM Features:\u003c\/strong\u003e factory handles, controls, charging station, and cup holders remain fully accessible after installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-Stage Hammer Black Powder Coat:\u003c\/strong\u003e durable steel construction with a textured finish suited to daily interior use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eSteel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eDual-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAccessory Hole Spacing\u003c\/td\u003e\n      \u003ctd\u003e1.9 in \/ 48.5 mm (AMPS Standard)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePEM Nut Thread Size\u003c\/td\u003e\n      \u003ctd\u003e10-24\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Device-Mount Systems\u003c\/td\u003e\n      \u003ctd\u003eRam Diamond Base Mounts, Bulletpoint Mounting Solutions, Quad Lock Systems \/ Base Plates\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2025+ Toyota 4Runner (6th generation)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTransmission Requirement\u003c\/td\u003e\n      \u003ctd\u003eAutomatic transmission only\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShip Weight\u003c\/td\u003e\n      \u003ctd\u003e4 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese panels suit 2025+ Toyota 4Runner owners with automatic transmissions who want organized, arm's-reach storage for daily carry gear (knives, radios, pouches, holsters) and a stable mount point for phones, GPS units, or tablets at the center console.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese panels are not compatible with manual transmission 4Runner models. Installation requires some drilling. The 10-24 bolts needed to attach electronic device mounts are not included and must be sourced separately.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich 4Runner years and generations fit these panels?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Center Console MOLLE Panels are designed specifically for the 2025 and newer Toyota 4Runner, which is the 6th generation of the model. Fitment for any year prior to 2025 or for earlier 4Runner generations is not confirmed.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo these panels work with manual transmission 4Runners?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Rago Fabrication Center Console MOLLE Panels are only compatible with automatic transmission models of the 2025+ Toyota 4Runner. The center console configuration on manual transmission variants differs, and these panels will not fit correctly.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes, some drilling is required to install the Rago Fabrication Center Console MOLLE Panels. The panels are designed to follow factory console lines, but mounting them to the 4Runner involves drilling. An install guide is available from Rago Fabrication to support the process.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eAre the 10-24 bolts for device mounts included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The 10-24 bolts used to attach electronic accessory mounts to the PEM nuts on the Rago Fabrication MOLLE Panels are not included and must be purchased separately. The panels include the PEM nuts; only the bolts for device mounts are excluded.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat MOLLE accessories and device mounts are compatible?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe panels accept any standard MOLLE-compatible attachment system using straps, bolts, or zip-ties. For rigid device mounts, the AMPS-standard hole pattern at 1.9-inch \/ 48.5 mm spacing is compatible with Ram Diamond Base Mounts, Bulletpoint Mounting Solutions, and Quad Lock Systems and Base Plates.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621749493830,"sku":"AC6702201NA","price":154.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/4th-Gen-Tacoma-Center-Console-Offtruck_1-sq.jpg?v=1791938432"},{"product_id":"rago-fabrication-6th-gen-4runner-center-mount-winch-front-bumper","title":"Rago Fabrication 6th Gen 4Runner Center Mount Winch Front Bumper","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Center Mount Winch Front Bumper is a steel, low-profile replacement front bumper built for 2025 and newer Toyota 4Runner (6th generation) that integrates a hidden heavy-duty winch mount, a 20-inch dual-row light bar mount, and a pair of 1-inch thick D-ring mounts into a single bolt-on assembly. It retains Toyota Safety Sense, the factory front camera, parking sensors, drive assist features, and fog lights. Cutting is required for installation.\u003c\/p\u003e\n\n\u003ch2\u003eLow Profile Where the Trail Demands It\u003c\/h2\u003e\n\u003cp\u003eThe bumper's tapered, low-profile shape keeps the approach angle clear of rocks, shrubs, and trail debris that a taller or more angular bumper would catch. Less material hanging below the frame means less to snag on ledges and less risk of body damage on tight, technical terrain, while still providing the structural protection a steel bumper offers over the factory fascia. The dual-stage hammer black powder coat finish resists chipping and corrosion through repeated exposure to mud, water, and abrasion.\u003c\/p\u003e\n\n\u003ch2\u003eFactory Safety Tech Stays Intact\u003c\/h2\u003e\n\u003cp\u003eThe Rago Fabrication bumper is engineered to be compatible with Toyota Safety Sense, retaining the factory front camera, parking sensors, and drive assist features. Buyers who have added aftermarket bumpers and lost ADAS functionality, or faced dealer recalibration costs, will recognize why this matters: the bumper replaces the fascia without forcing a choice between trail capability and the safety systems already in the vehicle.\u003c\/p\u003e\n\n\u003ch2\u003eRecovery and Lighting Built In\u003c\/h2\u003e\n\u003cp\u003eThe hidden center winch mount keeps the winch recessed behind accent cutouts on each side, preserving the bumper's clean profile while making the winch accessible for rigging. The integrated 20-inch dual-row light bar mount eliminates the need for a separate bracket when adding forward lighting. The pair of 1-inch thick D-ring mounts provide attachment points for full vehicle recovery, covering both self-recovery with a winch and assisted recovery with a strap, without requiring add-on shackle tabs.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHidden heavy-duty winch mount:\u003c\/strong\u003e center-mount design with accent cutouts for winch access\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated 20\" dual-row light bar mount:\u003c\/strong\u003e built into the bumper structure, no separate bracket needed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePair of 1\" thick D-ring mounts:\u003c\/strong\u003e full vehicle recovery attachment points included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToyota Safety Sense compatible:\u003c\/strong\u003e retains OEM front camera, parking sensors, and drive assist features\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRetains OEM fog lights:\u003c\/strong\u003e factory fog light openings preserved\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e manufactured in Chandler, Arizona\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2025+ Toyota 4Runner (6th Generation)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConstruction\u003c\/td\u003e\n      \u003ctd\u003eSteel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eDual-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWinch Mount\u003c\/td\u003e\n      \u003ctd\u003eCenter mount, hidden, heavy-duty\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLight Bar Mount\u003c\/td\u003e\n      \u003ctd\u003e20-inch dual-row (integrated, qty 1)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eD-Ring Mounts\u003c\/td\u003e\n      \u003ctd\u003e1-inch thick, qty 2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e82 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eUSA (Chandler, Arizona)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation Note\u003c\/td\u003e\n      \u003ctd\u003eCutting required\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOEM Skid Plate Compatibility\u003c\/td\u003e\n      \u003ctd\u003eCompatible with TRD Pro and Trailhunter OEM skid plates with minor trimming on front edge of OEM skid plate\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis bumper suits 2025 and newer Toyota 4Runner owners who want a steel front bumper with a built-in winch mount, integrated light bar mount, and D-ring recovery points while keeping Toyota Safety Sense and all factory driver-assist features fully operational. It is a strong fit for overlanding and off-road use where approach angle, recovery capability, and forward lighting are priorities.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis bumper does not fit any 4Runner generation prior to 2025 (5th generation and earlier are not compatible). The matching front skid plate is a separate product and is not included. Cutting is required during installation; this is not a no-drill or drop-in fitment. Owners of TRD Pro or Trailhunter trim levels who retain their OEM skid plate will need to trim the front edge of that skid plate for clearance.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this bumper work with Toyota Safety Sense and factory driver-assist features?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication 6th Gen 4Runner Center Mount Winch Front Bumper is engineered to be compatible with Toyota Safety Sense and retains the factory front camera, parking sensors, and drive assist features. The OEM fog lights are also retained.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat winch is compatible with this bumper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe bumper includes a hidden heavy-duty center winch mount, but Rago Fabrication does not publish a specific winch size or capacity range in the product data available at this time. Contact TerrainVault before purchasing a winch to confirm compatibility with your intended winch model.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs cutting required to install this bumper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. Cutting is required for installation of this front bumper on the 2025+ Toyota 4Runner. Review the install guide before beginning the installation.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this bumper come with a skid plate?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Rago Fabrication Center Mount Winch Front Bumper does not include a skid plate. A compatible 3\/16-inch aluminum front skid plate designed for this bumper is available separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs this bumper compatible with TRD Pro or Trailhunter trim levels?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication bumper fits 2025+ Toyota 4Runner including TRD Pro and Trailhunter trims. Owners who retain their OEM TRD Pro or Trailhunter skid plate will need to trim the front edge of that OEM skid plate for clearance with this bumper.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621750018118,"sku":"F7103630701NA","price":1198.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/6th-Gen-4Runner-Center-Mount-Winch-Front-Bumper-1-sq.jpg?v=1791938513"},{"product_id":"rago-fabrication-2025-toyota-4runner-roof-rack-with-light-pocket","title":"Rago Fabrication 2025+ Toyota 4Runner Roof Rack with Light Pocket","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Roof Rack with Light Pocket is a bolt-on aluminum roof rack built for the 2025+ Toyota 4Runner (6th generation), designed to carry roof top tents, cargo boxes, bike racks, kayaks, water tanks, and solar panels while integrating a front-mounted light pocket that accepts a 40-inch light bar or ten 3-inch pod lights without a separate bracket.\u003c\/p\u003e\n\n\u003ch2\u003eIntegrated Lighting Without the Extra Hardware\u003c\/h2\u003e\n\u003cp\u003eThe front light pocket on this 4Runner roof rack is built into the rack structure itself, accepting either one 40-inch radiused or straight light bar or ten 3-inch pod lights. The lighting mount is built into the rack's front edge, keeping the installation clean and the lighting position consistent. Buyers who want to run six 6-inch round lights have the option to add the separately sold RIGID Round Light Mount to the rack.\u003c\/p\u003e\n\n\u003ch2\u003eDouble-Walled Construction for Rough-Terrain Confidence\u003c\/h2\u003e\n\u003cp\u003eThe rack's side panels are double-walled, adding structural rigidity without relying solely on crossmember count for strength. Eight heavy-duty aluminum crossmembers span the rack and provide extensive mounting points for gear and accessories. The rack mounts to multiple factory roof attachment points, which distributes load across the vehicle's existing structure and prevents the rattling that single-point or rail-only mounts can develop on washboard and rocky terrain.\u003c\/p\u003e\n\n\u003ch2\u003eLow Profile, Factory Compatibility, and a Bolt-On Install\u003c\/h2\u003e\n\u003cp\u003eThe low-profile design keeps the 4Runner's roofline silhouette close to stock, and the front fairing adds a protective edge trim that guards the roof's paint at the leading edge while sealing the gap between rack and roof for improved aerodynamics and reduced wind noise. The rack retains full operation of the factory sunroof and does not interfere with the factory antenna or satellite reception. Installation is fully bolt-on with no drilling required. For buyers who want a solid deck surface and L-Track receiver mounts, Rago's Decking Panels (which add a MOLLE-compatible flat surface to the crossmembers) are available separately.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFront light pocket:\u003c\/strong\u003e mounts one 40-inch radiused or straight light bar, or ten 3-inch pod lights\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEight heavy-duty crossmembers:\u003c\/strong\u003e aluminum construction with extensive mounting options across the full rack span\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble-walled side panels:\u003c\/strong\u003e added structural rigidity for rough-terrain use\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory-compatible fitment:\u003c\/strong\u003e retains OEM sunroof operation and does not interfere with antenna or satellite reception\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFront fairing:\u003c\/strong\u003e protective edge trim guards roof paint and seals the rack-to-roof gap for aerodynamics\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e aluminum construction with satin black powder coat finish and hammer black accents\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2025+ Toyota 4Runner (6th generation)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eSatin black powder coat with hammer black accents\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCrossmembers\u003c\/td\u003e\n      \u003ctd\u003e8 heavy-duty aluminum crossmembers\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e76 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eFully bolt-on, no drilling required\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLight Pocket Compatibility\u003c\/td\u003e\n      \u003ctd\u003e(1) 40-inch radiused or straight light bar, or (10) 3-inch pod lights\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eMade in the USA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis roof rack suits 2025+ Toyota 4Runner owners who want a bolt-on platform for overlanding and camping gear (roof top tents, cargo boxes, kayaks, solar panels, and bike racks) and who want integrated front lighting capability without adding a separate light-bar mount. The bolt-on installation and factory-sunroof compatibility make it accessible for owners doing their own builds.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis rack is designed exclusively for the 2025+ (6th generation) Toyota 4Runner and does not fit earlier 4Runner generations. The Decking Panels and RIGID Round Light Mount shown in build photos are sold separately and are not included with the rack.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich 4Runner years and generations does this rack fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Roof Rack with Light Pocket fits the 2025 and newer Toyota 4Runner, which is the 6th generation of the model. It is not compatible with 5th generation or earlier 4Runner models.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat lighting configurations does the front light pocket support?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe built-in front light pocket on this 4Runner roof rack accepts one 40-inch radiused light bar, one 40-inch straight light bar, or ten 3-inch pod lights. Buyers who want to run six 6-inch round lights can add the separately sold RIGID Round Light Mount to the rack.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this rack require drilling into the roof?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Rago Fabrication 4Runner Roof Rack installs fully bolt-on using multiple factory roof attachment points. No drilling is required, and the installation does not permanently modify the vehicle's roof.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill this rack block the factory sunroof or affect antenna reception?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication 4Runner Roof Rack is designed to retain full operation of the factory sunroof. It also does not interfere with the factory antenna or satellite reception, so OEM connectivity features remain unaffected.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eAre the Decking Panels included with the rack?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Decking Panels are not included with the Rago Fabrication 4Runner Roof Rack. They are a separately available accessory that adds a MOLLE-compatible flat surface and L-Track receiver mounts to the rack's crossmembers.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621751230534,"sku":"AC710650103","price":1298.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2025_Toyota4RunnerRoofRackwLightPocket-sq.jpg?v=1791938578"},{"product_id":"rago-fabrication-2025-toyota-4runner-aluminum-roof-rack","title":"Rago Fabrication 2025+ Toyota 4Runner Aluminum Roof Rack","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Aluminum Roof Rack is a bolt-on, low-profile platform built for the 2025+ Toyota 4Runner (6th Gen), featuring eight heavy-duty aluminum crossmembers and double-walled side panels that resist flex under the weight of roof top tents, cargo boxes, kayaks, solar panels, and water tanks. The rack ships as a single fitment for the 6th Gen 4Runner and is made in the USA.\u003c\/p\u003e\n\n\u003ch2\u003eEight Crossmembers, Zero Flex\u003c\/h2\u003e\n\u003cp\u003eEight heavy-duty aluminum crossmembers spread load across the full width of the rack, giving you multiple anchor points for roof top tents, bike carriers, cargo boxes, and oversized gear. The double-walled side panels reinforce the structure laterally, so the rack holds its shape under asymmetric loads on rough trails rather than racking or twisting. That rigidity matters most when a loaded roof top tent shifts weight to one side on a steep sidehill: the rack stays square and the tent stays level.\u003c\/p\u003e\n\n\u003ch2\u003eFactory-Point Mounting That Stays Quiet\u003c\/h2\u003e\n\u003cp\u003eThe rack bolts to multiple OEM roof attachment points, distributing stress across the factory structure rather than concentrating it at a single span. That connection eliminates the rattle and creep that aftermarket racks with generic clamps develop over time on washboard roads. The low-profile design keeps the rack close to the roofline, which reduces the aerodynamic penalty and wind noise compared with taller universal-fit platforms.\u003c\/p\u003e\n\n\u003ch2\u003eFront Fairing That Protects the Roof\u003c\/h2\u003e\n\u003cp\u003eThe solid front fairing includes a protective edge trim along its underside that sits between the rack and the roof surface. That trim seals the gap to block wind buffeting and prevents the leading edge from contacting and scratching the paint during installation or when the rack flexes slightly on trail. The fairing also provides a mounting surface for the optional Rago RIGID Round Light Mount, which accepts up to six 6-inch round lights.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEight aluminum crossmembers:\u003c\/strong\u003e span the full rack width for versatile gear mounting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble-walled side panels:\u003c\/strong\u003e resist lateral flex under heavy or asymmetric loads\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM attachment points:\u003c\/strong\u003e bolt-on installation to multiple factory roof mount locations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFront fairing with edge trim:\u003c\/strong\u003e seals the rack-to-roof gap and protects paint\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory sunroof compatible:\u003c\/strong\u003e does not block or interfere with the OEM sunroof\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM antenna\/satellite compatible:\u003c\/strong\u003e does not interfere with factory antenna or satellite reception\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2025+ Toyota 4Runner (6th Gen)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eSatin black powder coat with hammer black accents\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCrossmembers\u003c\/td\u003e\n      \u003ctd\u003e8 heavy-duty aluminum crossmembers\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSide Panels\u003c\/td\u003e\n      \u003ctd\u003eDouble-walled\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eFully bolt-on, mounts to multiple OEM roof attachment points\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSunroof Compatibility\u003c\/td\u003e\n      \u003ctd\u003eCompatible with factory sunroof\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAntenna\/Satellite\u003c\/td\u003e\n      \u003ctd\u003eDoes not interfere with OEM antenna or satellite reception\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e76 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eMade in the USA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC710640103\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis rack suits 2025+ Toyota 4Runner (6th Gen) owners who need a rigid, low-profile roof platform for overlanding or camping, particularly those mounting roof top tents, cargo boxes, kayaks, solar panels, or water tanks and who want a bolt-on installation that uses factory attachment points.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis rack does not fit any 4Runner generation prior to the 2025 6th Gen, and it does not fit other vehicle makes or models. The Rago Decking Panels and the Rago RIGID Round Light Mount are sold separately and are not included with the rack.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this rack work with the factory sunroof?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication 2025+ 4Runner Roof Rack is designed to be compatible with the factory sunroof and does not block or interfere with its operation. The low-profile mounting keeps the rack close to the roofline without obstructing the sunroof opening.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill this rack affect my factory antenna or satellite reception?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication 4Runner Roof Rack does not interfere with the factory antenna or satellite reception.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow does this roof rack install?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication 4Runner Roof Rack is fully bolt-on and mounts to multiple OEM roof attachment points on the 2025+ 4Runner. No cutting or drilling is required. Rago provides an install guide and overview video; professional installation is not stated as required, but the 76 lb rack weight makes a second person helpful.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat gear can I mount on this rack?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe eight heavy-duty aluminum crossmembers on the Rago Fabrication 4Runner Roof Rack are designed to accept roof top tents, bike racks, cargo boxes, kayaks, solar panels, and water tanks. Adding optional Rago Decking Panels (sold separately, up to seven pairs) provides a flat surface with MOLLE panel and L-Track receiver mount compatibility.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eAre the Decking Panels and the RIGID Light Mount included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNeither the Rago Decking Panels nor the Rago RIGID Round Light Mount is included with the roof rack; both are sold separately. The Decking Panels mount on top of the rack crossmembers and accept MOLLE panels and L-Track receivers. The RIGID Light Mount attaches to the front fairing and supports up to six 6-inch round lights.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat finish does this rack have, and how durable is it?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication 4Runner Roof Rack is finished in a satin black powder coat with hammer black accents. Powder coat is a standard durable finish for outdoor aluminum structures, providing resistance to chipping and corrosion in overlanding conditions. The aluminum construction keeps the rack lightweight relative to steel alternatives.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621753262150,"sku":"AC710640103","price":1198.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2025_Toyota-4Runner-Roof-Rack-sq.jpg?v=1791938646"},{"product_id":"rago-fabrication-2025-toyota-4runner-ditch-light-brackets","title":"Rago Fabrication 2025+ Toyota 4Runner Ditch Light Brackets","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Ditch Light Brackets are a bolt-on pair of steel mounts designed for the 2025+ Toyota 4Runner (6th Gen), each capable of holding a pod light up to 6 inches in diameter. An adjustable mounting angle lets drivers direct light forward down the trail or sweep it toward the sides, while a low-profile design keeps both brackets outside the driver's and passenger's sightlines. The brackets ship as a pair and are finished in a dual-stage hammer black powder coat.\u003c\/p\u003e\n\n\u003ch2\u003eAimed Where You Need It\u003c\/h2\u003e\n\u003cp\u003eThe Rago Fabrication Ditch Light Brackets offer an adjustable mounting angle that can be set to face forward or angled toward either side of the trail. That flexibility means a single set of brackets can serve different lighting strategies: illuminating the path directly ahead, catching obstacles at the edges of the trail, or both. Adjustability also means the angle can be revisited as driving conditions or personal preference change, without replacing the hardware.\u003c\/p\u003e\n\n\u003ch2\u003eOut of the Sightline, Into the Trail\u003c\/h2\u003e\n\u003cp\u003eDitch light mounts positioned too high or too far inboard can create glare or visual clutter for the driver and front passenger. The Rago Fabrication brackets are designed with a low-profile fitment that places each light outside both occupants' sightlines, so the added illumination improves what the driver can see on the trail without introducing new distractions inside the cab.\u003c\/p\u003e\n\n\u003ch2\u003eClean Install, Clean Finish\u003c\/h2\u003e\n\u003cp\u003eThe brackets use a fully bolt-on design. No cutting, welding, or modification to the 4Runner's body is required. Integrated wire management channels the pod light wiring cleanly along the bracket, keeping the installation tidy and reducing the chance of wiring chafe or exposure. The dual-stage hammer black powder coat finish is applied over durable steel construction, providing a surface that resists corrosion and complements the 4Runner's exterior trim.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePod Light Capacity:\u003c\/strong\u003e accommodates pod lights up to 6 inches per bracket\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustable Angle:\u003c\/strong\u003e mounts can be directed forward or toward the sides of the trail\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow-Profile Positioning:\u003c\/strong\u003e sits outside driver and passenger sightlines\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated Wire Management:\u003c\/strong\u003e routes wiring cleanly along the bracket\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-Stage Hammer Black Powder Coat:\u003c\/strong\u003e resilient finish over durable steel construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBolt-On Installation:\u003c\/strong\u003e no cutting or welding required; sold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eSteel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eDual-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMax Pod Light Size (per bracket)\u003c\/td\u003e\n      \u003ctd\u003e6 inches\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting\u003c\/td\u003e\n      \u003ctd\u003eFully bolt-on\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eQuantity\u003c\/td\u003e\n      \u003ctd\u003eSold as a pair\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2025+ Toyota 4Runner (6th Gen)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC7107701NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese brackets suit 2025+ Toyota 4Runner (6th Gen) owners who want to add pod-style ditch lights for improved off-road trail visibility. The adjustable angle and low-profile design make them a practical fit for overlanding and trail driving where forward and side illumination both matter.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese brackets do not fit 5th Gen or earlier Toyota 4Runner models. Pod lights are not included and must be sourced separately; each bracket accommodates a pod light up to 6 inches. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat size pod lights will these brackets hold?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach Rago Fabrication Ditch Light Bracket accommodates a pod light up to 6 inches in diameter. The brackets are sold as a pair, so the set supports one pod light per side. Pod lights are not included and are purchased separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the mounting angle be changed after the brackets are installed?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Rago Fabrication Ditch Light Brackets feature an adjustable mounting angle that can be set to face forward down the trail or angled toward either side, and that angle can be repositioned after installation to suit different lighting needs or terrain.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill these brackets block the driver's or passenger's view?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Ditch Light Brackets are designed with a low-profile fitment that positions each bracket outside both the driver's and front passenger's sightlines, so the mounted pod lights do not obstruct forward visibility from inside the cab.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDo these brackets fit a 5th Gen Toyota 4Runner?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Rago Fabrication Ditch Light Brackets are designed specifically for the 2025+ Toyota 4Runner (6th Gen) and are not compatible with 5th Gen or earlier 4Runner models.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow is the wiring managed with these brackets?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Ditch Light Brackets include integrated wire management that routes the pod light wiring cleanly along the bracket body, keeping the installation tidy and reducing wiring exposure without requiring additional conduit or adhesive mounts.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621754409030,"sku":"AC7107701NA","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2025_Toyota-4Runner-Ditch-Light-Brackets-sq.jpg?v=1791938721"},{"product_id":"rago-fabrication-2025-toyota-4runner-rear-decking-panels","title":"Rago Fabrication 2025+ Toyota 4Runner Rear Decking Panels","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Rear Decking Panels are bolt-on aluminum panels designed for the 2025+ Toyota 4Runner (6th Gen) that extend the mounting capability of Rago's 6th Gen 4Runner roof racks. Each panel features a MOLLE grid for straps, bolts, and accessory attachment systems, plus integrated L-Track receiver mounts for L-Track tie-down rings. The panels are sold as a pair and finished in a dual-stage hammer black powder coat.\u003c\/p\u003e\n\n\u003ch2\u003eMOLLE and L-Track Mounting in One Panel\u003c\/h2\u003e\n\u003cp\u003eThe rear decking panels combine two proven attachment systems on a single surface. The MOLLE grid accepts straps, bolts, and a wide range of aftermarket MOLLE-compatible accessories, so gear can be organized and secured without improvised solutions. The integrated L-Track receiver mounts add a second attachment method. L-Track tie-down rings slide and lock into position anywhere along the track, letting load placement shift trip to trip without drilling new holes or buying additional hardware.\u003c\/p\u003e\n\n\u003ch2\u003eBuild Out a Complete Roof Rack Surface\u003c\/h2\u003e\n\u003cp\u003eThe rear decking panels are designed to pair with Rago's Standard Decking Panels, allowing a partial or full flat surface across the roof rack. A complete deck opens up mounting options that individual crossbars cannot support: rooftop tents, large cargo boxes, and oversized gear that needs a continuous platform. The same flat surface can serve as a functional deck at camp: a stable place to set up chairs or a cooler without unloading the truck.\u003c\/p\u003e\n\n\u003ch2\u003eBolt-On Aluminum Construction\u003c\/h2\u003e\n\u003cp\u003eThe panels are made from aluminum for a combination of structural rigidity and low added weight. The pair ships at 8 lb. Installation is fully bolt-on. No cutting or fabrication is required. The dual-stage hammer black powder coat finish provides corrosion resistance and a consistent appearance that matches Rago's roof rack lineup.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMOLLE Grid:\u003c\/strong\u003e compatible with straps, bolts, and MOLLE-standard attachment systems for securing gear and accessories\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated L-Track Receiver Mounts:\u003c\/strong\u003e accept L-Track tie-down rings for flexible, repositionable load securing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoof Rack Compatibility:\u003c\/strong\u003e designed for Rago Solid Front Fairing and Light Pocket Front Fairing 6th Gen 4Runner roof racks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBolt-On Installation:\u003c\/strong\u003e no cutting or fabrication required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAluminum Construction:\u003c\/strong\u003e dual-stage hammer black powder coat finish\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eSold as a Pair\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eDual-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight (pair)\u003c\/td\u003e\n      \u003ctd\u003e8 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eQuantity\u003c\/td\u003e\n      \u003ctd\u003eSold as a pair\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eBolt-on\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2025+ Toyota 4Runner (6th Gen)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRack Compatibility\u003c\/td\u003e\n      \u003ctd\u003eRago 6th Gen 4Runner Solid Front Fairing and Light Pocket Front Fairing Roof Racks\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC7107401NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese rear decking panels suit 2025+ Toyota 4Runner (6th Gen) owners who have already installed or are building out a Rago 6th Gen 4Runner roof rack and want to add MOLLE mounting, L-Track tie-down capability, or a flat deck surface for a rooftop tent, cargo box, or camp setup.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese panels are not compatible with earlier 4Runner generations, other vehicle makes or models, or third-party roof racks. Rago Standard Decking Panels are sold separately and are not included with this purchase.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Rago roof racks do these panels fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Rear Decking Panels are designed specifically for Rago's 6th Gen 4Runner Solid Front Fairing Roof Rack and the Light Pocket Front Fairing Roof Rack. They are not confirmed compatible with third-party roof racks or earlier Rago rack generations. Confirm rack compatibility before ordering if you are unsure which rack version you have.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan these panels support a rooftop tent?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe rear decking panels can be paired with Rago Standard Decking Panels (sold separately) to create a partial or complete flat surface across the roof rack. That combined flat surface is suitable for mounting a rooftop tent or large cargo box. The rear panels alone do not form a complete deck and are not confirmed to support a rooftop tent independently.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat attachment systems work with the MOLLE grid?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe MOLLE grid on the Rago Rear Decking Panels accepts straps, bolts, and other MOLLE-standard attachment systems, making them compatible with a wide range of aftermarket MOLLE accessories. The panels also include integrated L-Track receiver mounts, which accept L-Track tie-down rings for repositionable load securing along the track.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow many panels are included, and how do they install?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Rear Decking Panels are sold as a pair. Installation is fully bolt-on. No cutting or fabrication is required. An install guide is available from Rago Fabrication. Confirm hardware requirements with TerrainVault before ordering if you need to source fasteners separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs there a California Proposition 65 warning for this product?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621754867782,"sku":"AC7107401NA","price":198.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2025_Toyota4RunnerRearDeckingPanels-sq.jpg?v=1791938779"},{"product_id":"rago-fabrication-6th-gen-4runner-front-skid-plate-for-center-mount-bum","title":"Rago Fabrication 6th Gen 4Runner Front Skid Plate for Center Mount Bumper","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication 6th Gen 4Runner Front Skid Plate is a 3\/16\" aluminum undercarriage guard built to mount directly to the Rago Center Mount Winch Front Bumper on 2025 and newer Toyota 4Runners. The plate shields the front undercarriage from rocks, shrubs, and trail debris, and installs fully bolt-on using riv-nuts. The bumper is sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eTrail Protection Without the Weight Penalty\u003c\/h2\u003e\n\u003cp\u003eA 3\/16\" aluminum construction gives the skid plate enough thickness to deflect rocks and debris that would otherwise reach the front undercarriage, while keeping the overall weight low enough that it does not meaningfully affect approach angle or vehicle dynamics. For overlanders who run technical terrain regularly, that combination reduces the risk of costly undercarriage damage without the bulk of a steel plate.\u003c\/p\u003e\n\n\u003ch2\u003eFinish That Holds Up Off-Road\u003c\/h2\u003e\n\u003cp\u003eThe skid plate is finished in satin black powder coat, the same finish used on Rago's bumper lineup. Powder coat resists chipping and corrosion better than rattle-can paint, which matters on a component that contacts rocks and brush on every trail run. The matching finish also keeps the front end visually consistent when the skid plate and bumper are installed together.\u003c\/p\u003e\n\n\u003ch2\u003eBolt-On Installation with Riv-Nuts\u003c\/h2\u003e\n\u003cp\u003eInstallation is fully bolt-on. The skid plate uses riv-nuts, which provide a secure threaded connection without requiring welding or permanent modification to the bumper. For builders who prefer to do their own installs, the riv-nut approach keeps the process straightforward and reversible.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3\/16\" Aluminum Construction:\u003c\/strong\u003e lightweight yet rigid enough to deflect rocks and trail debris from the front undercarriage\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSatin Black Powder Coat:\u003c\/strong\u003e corrosion-resistant finish matched to Rago's bumper line\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFully Bolt-On Installation:\u003c\/strong\u003e uses riv-nuts for a secure, weld-free fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesigned for Rago's Center Mount Winch Front Bumper:\u003c\/strong\u003e engineered specifically to pair with that bumper on 2025+ 4Runners\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2025+ Toyota 4Runner (6th Gen)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRequired Bumper\u003c\/td\u003e\n      \u003ctd\u003eRago Fabrication Center Mount Winch Front Bumper (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003e3\/16\" Aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eSatin Black Powder Coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eFully bolt-on; riv-nut hardware\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e10 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC7106903NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis skid plate suits 2025 and newer Toyota 4Runner owners who have already installed or are building around the Rago Fabrication Center Mount Winch Front Bumper and want front undercarriage protection for overlanding and off-road trail use.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis skid plate does not fit 5th Gen or earlier 4Runners, and it is not compatible with other bumper brands or bumper styles. The plate is designed specifically for the Rago Fabrication Center Mount Winch Front Bumper. The bumper itself is sold separately and is not included.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this skid plate fit all 4Runner model years?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication 6th Gen 4Runner Front Skid Plate fits 2025 and newer Toyota 4Runners only. It is not designed for 5th Gen or earlier 4Runner generations, and fitment on those vehicles is not supported.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill this skid plate work with bumpers from other brands?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. This skid plate mounts only to the Rago Fabrication Center Mount Winch Front Bumper. Other bumper brands and other Rago bumper configurations are not compatible.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs the Rago Center Mount Winch Front Bumper included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe bumper is sold separately. This listing covers the skid plate only. The Rago Fabrication Center Mount Winch Front Bumper must be purchased independently before the skid plate can be installed.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does installation involve, and are special tools required?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 6th Gen 4Runner Front Skid Plate installs fully bolt-on using riv-nuts. No welding is required. Rago publishes an install guide; consult that guide for the specific tools and torque specs needed to complete the installation correctly.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621755490374,"sku":"AC7106903NA","price":379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2025_Toyota-4Runner-Skid-Plate-for-Center-Mount-Front-Bumper-sq.jpg?v=1791938846"},{"product_id":"rago-fabrication-illuminator-roof-rack-side-light-mount","title":"Rago Fabrication Illuminator Roof Rack Side Light Mount","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Illuminator is an aluminum side light mount that bolts to the side panels of a roof rack, angling a light outward and downward at 35 degrees to illuminate trail hazards or a campsite perimeter. It is available in two versions: the S2 Illuminator, sized for Baja Designs S2 lights, and the Rock Light Illuminator, which accepts universal rock lights for supplementary side lighting.\u003c\/p\u003e\n\n\u003ch2\u003eSide Lighting Where a Forward Bar Cannot Reach\u003c\/h2\u003e\n\u003cp\u003eA roof rack's forward light bar covers the road ahead, but the edges of a trail (brush, drop-offs, boulders at door height) sit outside that beam. The Illuminator mounts to the side panels of a roof rack and points a light at a 35-degree angle toward those margins, giving a driver a view of hazards that forward-facing lights miss entirely. Because the mount bolts to the rack's existing side panel attachment points, no drilling or fabrication is required.\u003c\/p\u003e\n\n\u003ch2\u003eTwo Versions for Different Lighting Setups\u003c\/h2\u003e\n\u003cp\u003eThe S2 Illuminator is machined to accept a Baja Designs S2 pod light, a compact high-output light used in demanding off-road conditions. The Rock Light Illuminator uses a universal fitment that works with standard rock lights, making it a lower-cost option for campsite ambiance or soft supplementary lighting rather than high-intensity trail use. Choosing the right version at the outset avoids adapters or modifications later.\u003c\/p\u003e\n\n\u003ch2\u003eRack-Side and MOLLE-Panel Mounting\u003c\/h2\u003e\n\u003cp\u003eBoth Illuminator versions bolt directly to the side panels of Rago Roof Racks and are also compatible with most other roof racks on the market. Either version can additionally mount to a Rago MOLLE panel, which opens up placement options inside or outside the vehicle beyond the roofline. That flexibility is useful when a roof rack is already fully loaded or when side-panel lighting is needed at a lower height.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e35-Degree Light Angle:\u003c\/strong\u003e directs illumination toward trail edges and campsite perimeter rather than straight down\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo Variations:\u003c\/strong\u003e S2 Illuminator for Baja Designs S2 lights; Rock Light Illuminator for universal rock lights\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLightweight Aluminum Construction:\u003c\/strong\u003e keeps added weight to the rack minimal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMicro-Texture Black Powder Coat:\u003c\/strong\u003e satin black finish over aluminum for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBolt-On Installation:\u003c\/strong\u003e mounts to Rago Roof Rack side panels and most other roof racks without drilling\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMOLLE Panel Compatible:\u003c\/strong\u003e mounts to Rago MOLLE panels for interior or lower exterior placement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eS2 Illuminator\u003c\/th\u003e\n      \u003cth\u003eRock Light Illuminator\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eMicro-texture satin black powder coat\u003c\/td\u003e\n      \u003ctd\u003eMicro-texture satin black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLight Angle\u003c\/td\u003e\n      \u003ctd\u003e35 degrees\u003c\/td\u003e\n      \u003ctd\u003e35 degrees\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLight Compatibility\u003c\/td\u003e\n      \u003ctd\u003eBaja Designs S2\u003c\/td\u003e\n      \u003ctd\u003eUniversal rock light\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e1 lb\u003c\/td\u003e\n      \u003ctd\u003e1 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRack Compatibility\u003c\/td\u003e\n      \u003ctd\u003eRago Roof Racks; most roof racks on the market\u003c\/td\u003e\n      \u003ctd\u003eRago Roof Racks; most roof racks on the market\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMOLLE Panel Compatible\u003c\/td\u003e\n      \u003ctd\u003eYes (Rago MOLLE panels)\u003c\/td\u003e\n      \u003ctd\u003eYes (Rago MOLLE panels)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC9908601NA\u003c\/td\u003e\n      \u003ctd\u003eAC9908801NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Illuminator suits overlanders and off-road campers who want side-directed lighting mounted to a roof rack or MOLLE panel, particularly those running Rago Roof Racks who want a factory-integrated look, or those who need supplementary lighting at the trail edge rather than only forward illumination.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Illuminator is a mount only; the light fixture is not confirmed as included and must be sourced separately. The S2 Illuminator is sized specifically for Baja Designs S2 pod lights and is not a universal light mount.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Illuminator include the light fixture?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Illuminator is a mounting bracket only. The light fixture (either a Baja Designs S2 pod light for the S2 Illuminator version or a rock light for the Rock Light Illuminator version) is not confirmed as included and should be sourced separately before installation.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill the Illuminator fit my roof rack if it isn't a Rago rack?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eBoth Illuminator versions are designed to bolt to the side panels of Rago Roof Racks and are stated as compatible with most roof racks on the market. Compatibility with a specific third-party rack is not individually listed, so confirming your rack's side-panel attachment points before ordering is advisable.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the Illuminator mount somewhere other than a roof rack?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. Both the S2 Illuminator and Rock Light Illuminator can mount to Rago MOLLE panels, which allows placement inside the vehicle or at a lower exterior position rather than solely at roofline height.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat angle does the Illuminator point the light?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Illuminator positions the light at a 35-degree angle, directing illumination outward and downward toward the sides of the trail or the perimeter of a campsite rather than straight down alongside the vehicle.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhich version should I choose: S2 Illuminator or Rock Light Illuminator?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe S2 Illuminator is machined specifically for Baja Designs S2 pod lights and suits buyers who want high-output side lighting for demanding trail conditions. The Rock Light Illuminator uses a universal rock light fitment and is better suited for campsite ambiance or supplementary side lighting where maximum output is not the priority.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"S2 Illuminator","offer_id":50621756604486,"sku":"AC9908601NA","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Rock Light Iluminator","offer_id":50621756637254,"sku":"AC9908801NA","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/S2-Illuminator-Studio-5-sq.jpg?v=1791938903"},{"product_id":"rago-fabrication-land-cruiser-gx-550-roof-rack-with-light-pocket","title":"Rago Fabrication Land Cruiser GX 550 Roof Rack with Light Pocket","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Roof Rack with Light Pocket is a heavy-duty aluminum roof rack built for the 2024+ Toyota Land Cruiser and Lexus GX 550, featuring nine aluminum crossmembers, double-walled side panels, and a pocketed front fairing that accepts a 40-inch light bar or up to ten 3-inch pod lights straight out of the box. Satin black powder coat with hammer black accents and a low-profile silhouette keep the rack visually integrated with the Land Cruiser's exterior. This rack is available in one configuration for the 2024+ Toyota Land Cruiser and Lexus GX 550.\u003c\/p\u003e\n\n\u003ch2\u003eStructural Rigidity You Can Load With Confidence\u003c\/h2\u003e\n\u003cp\u003eNine heavy-duty aluminum crossmembers span the full width of the rack, distributing load evenly and giving gear straps, tie-down points, and accessory mounts a consistent, solid surface to work against. Double-walled side panels add lateral stiffness, resisting the racking forces on uneven terrain that loosen hardware and shift cargo on long off-road days. The rack attaches to multiple factory roof install points, spreading stress across the vehicle's structure rather than concentrating it at a single location.\u003c\/p\u003e\n\n\u003ch2\u003eA Light Pocket Built Into the Front Fairing\u003c\/h2\u003e\n\u003cp\u003eThe pocketed front fairing is part of the rack's structure, sized to accept one 40-inch radiused or straight light bar, or up to ten 3-inch pod lights, without additional brackets or adapters. Buyers who want round lights instead can add the optional RIGID Light Mount (sold separately), which accommodates up to six 6-inch RIGID round lights. The Illuminator light mount (sold separately) is a further option for Baja Designs S2 flush-mounted LEDs or standard rock lights along the sides of the rack. Having three distinct lighting paths means the rack can grow with a build rather than locking the buyer into one configuration at purchase.\u003c\/p\u003e\n\n\u003ch2\u003eDesigned Around the Factory Roof\u003c\/h2\u003e\n\u003cp\u003eProtective edge trim lines the bottom of the light pocket, preventing paint scratching where the fairing meets the roofline and sealing the gap between the rack and the roof surface. The rubber edge and aerodynamic profile work together to reduce wind noise at highway speeds. The rack retains full operation of the OEM sunroof and does not interfere with the factory antenna or satellite reception. Optional Decking Panels (sold separately) add a flat load surface and additional tie-down points when gear is not compatible with crossbar spacing.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNine aluminum crossmembers:\u003c\/strong\u003e span the full rack width for even load distribution and versatile gear mounting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble-walled side panels:\u003c\/strong\u003e add lateral stiffness for stability on rough terrain\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePocketed front fairing:\u003c\/strong\u003e accepts one 40-inch radiused or straight light bar, or up to ten 3-inch pod lights\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProtective edge trim:\u003c\/strong\u003e lines the light pocket bottom to prevent scratching and seal the gap at the roofline\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM sunroof and antenna compatibility:\u003c\/strong\u003e retains full factory sunroof operation and does not affect antenna or satellite reception\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e manufactured by Rago Fabrication in Chandler, Arizona\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2024+ Toyota Land Cruiser and Lexus GX 550\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eSatin black powder coat with hammer black accents\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCrossmembers\u003c\/td\u003e\n      \u003ctd\u003e9 heavy-duty aluminum crossmembers\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSide Panels\u003c\/td\u003e\n      \u003ctd\u003eDouble-walled\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLight Bar Compatibility\u003c\/td\u003e\n      \u003ctd\u003eOne 40-inch radiused or straight light bar\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePod Light Compatibility\u003c\/td\u003e\n      \u003ctd\u003eUp to ten 3-inch pod lights\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e84 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eMade in the USA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis rack suits owners of 2024+ Toyota Land Cruiser and Lexus GX 550 vehicles who want a purpose-built aluminum roof platform with integrated lighting capability: overlanding with a rooftop tent and recovery gear, car camping with cargo boxes and kayaks, or building a dual-purpose daily driver with auxiliary lighting.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis rack does not fit any vehicle other than the 2024+ Toyota Land Cruiser and Lexus GX 550. Decking Panels, the RIGID Light Mount, Exterior MOLLE Storage Panels, and The Illuminator light mount are not included and are sold separately. No load rating figure is published for this rack; buyers with specific payload requirements should contact TerrainVault before purchasing.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich vehicles does this roof rack fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Roof Rack with Light Pocket is designed specifically for the 2024+ Toyota Land Cruiser and Lexus GX 550. It does not fit earlier Land Cruiser generations or other Toyota and Lexus models.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat lighting does the front pocket support?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe pocketed front fairing on this roof rack accepts one 40-inch radiused or straight light bar, or up to ten 3-inch pod lights. An optional RIGID Light Mount (sold separately) adds a third configuration for up to six 6-inch RIGID round lights.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill this rack interfere with the factory sunroof?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Rago Fabrication Roof Rack with Light Pocket is engineered to retain full operation of the OEM sunroof on the 2024+ Toyota Land Cruiser and Lexus GX 550. The sunroof opens and closes normally with the rack installed.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes the rack affect the factory antenna or satellite reception?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Roof Rack with Light Pocket is designed not to interfere with the factory antenna or satellite reception on the 2024+ Toyota Land Cruiser and Lexus GX 550.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included with the rack?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Roof Rack with Light Pocket ships as the rack assembly. Decking Panels, the RIGID Light Mount, Exterior MOLLE Storage Panels, and The Illuminator light mount are all sold separately and are not included in this purchase.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the rack made of and how is it finished?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Roof Rack with Light Pocket is constructed from aluminum and finished in a satin black powder coat with hammer black accents. It is manufactured by Rago Fabrication in Chandler, Arizona, and carries a Made in the USA designation.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50621762928710,"sku":"AC770650103","price":1599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2024-Land-Cruiser-40-inch-light-bar-Roof-Rack-1-sq.jpg?v=1791939061"}],"url":"https:\/\/terrainvault.com\/collections\/rago-fabrication.oembed","provider":"TerrainVault","version":"1.0","type":"link"}