{"title":"Power Tank","description":null,"products":[{"product_id":"power-tank-10-lb-dual-bottle-co2-tire-inflation-system","title":"Power Tank 10 lb Dual Bottle CO2 Tire Inflation System","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank 10 lb Dual Bottle CO2 Tire Inflation System is a two-bottle compressed CO2 air system built for off-road and overland use, capable of airing up 36 thirty-five-inch tires per fill and running impact wrenches and air tools without a compressor, generator, or cooldown wait. Each aluminum Armorcoat bottle stands 24 inches tall with a 6.9-inch diameter and is fitted with a nickel-plated valve and a 6061 aluminum Power Grip Guard handle. Configure this system with your choice of five tire inflator gauges and either a 30-foot coiled or 30-foot straight Super Flex hose.\u003c\/p\u003e\n\u003cp class=\"product-shipping-note\"\u003e\u003cstrong\u003eShips empty:\u003c\/strong\u003e CO2 tanks cannot be shipped filled, so the CO2 bottle in this package arrives empty. Have it filled with liquid CO2 at a local refill source (fire extinguisher service, welding gas supplier, beverage carbonics shop or paintball store) before first use.\u003c\/p\u003e\n\n\u003ch2\u003eNo Compressor, No Cooldown, No Moving Parts\u003c\/h2\u003e\n\u003cp\u003eCO2 delivers pressure on demand. The moment you open the valve, full flow is available. There are no motors to spin up, no heat to manage, and no duty cycle to respect. That means a 35x12.50x17-inch tire can be aired up by 15 psi in 38 seconds, and the system is ready for the next tire immediately. For a group run or a recovery situation where time matters, that consistency is the practical difference between a quick stop and a long one.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to Run Air Tools, Not Just Tires\u003c\/h2\u003e\n\u003cp\u003eThe Super Flow adjustable regulator is engineered for both high flow and high pressure, and is designed to resist freeze-clogging, a common failure point on CO2 regulators during sustained use. It is fully rebuildable and backed by a limited lifetime warranty. The Super Coupler accepts any air tool plug style and connects or disconnects at 0 psi regardless of hose pressure, so swapping between a tire inflator gauge and an impact wrench on the trail does not require bleeding the line first.\u003c\/p\u003e\n\n\u003ch2\u003eHose and Hardware Built for CO2\u003c\/h2\u003e\n\u003cp\u003eThe included Super Flex hose is rated to 400 psi working pressure and 1200 psi burst pressure, with high-quality swivels at both ends. Unlike standard rubber air hoses, the Super Flex hose does not shatter when cold, a meaningful distinction when temperatures drop overnight at elevation. The Super Bracket provides a lightweight, race-proven mounting point when paired with a compatible vehicle mount (sold separately). A Carbon Regulator Cover is included to protect the regulator from trail debris and UV exposure.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual 10 lb Armorcoat Bottles:\u003c\/strong\u003e aluminum construction with nickel-plated valves and durable armorcoat finish\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuper Flow Regulator:\u003c\/strong\u003e adjustable, high-flow, freeze-clog resistant, fully rebuildable, limited lifetime warranty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuper Flex Hose (30 ft):\u003c\/strong\u003e 400 psi WP \/ 1200 psi burst, cold-resistant, swivel fittings at both ends; coiled or straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuper Coupler:\u003c\/strong\u003e connects and disconnects at 0 psi, accepts any air tool plug style, rebuildable aluminum body\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Grip Guard Handle:\u003c\/strong\u003e machined 6061 aluminum, protects valve and regulator from impacts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCarbon Regulator Cover:\u003c\/strong\u003e included to protect regulator finish and function\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConfiguration\u003c\/td\u003e\n      \u003ctd\u003eDual 10 lb CO2 bottles\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBottle Height (with handle)\u003c\/td\u003e\n      \u003ctd\u003e24 in per bottle\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBottle Diameter\u003c\/td\u003e\n      \u003ctd\u003e6.9 in per bottle\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEmpty Weight (per bottle)\u003c\/td\u003e\n      \u003ctd\u003e~17 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFull Weight (per bottle)\u003c\/td\u003e\n      \u003ctd\u003e~27 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUsable Energy Equivalent\u003c\/td\u003e\n      \u003ctd\u003e400 gal @ 150 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBottle Material\u003c\/td\u003e\n      \u003ctd\u003eAluminum, Armorcoat finish, nickel-plated valve\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHandle Material\u003c\/td\u003e\n      \u003ctd\u003e6061 aluminum (machined)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose Length\u003c\/td\u003e\n      \u003ctd\u003e30 ft (coiled or straight, buyer's choice)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose Working Pressure\u003c\/td\u003e\n      \u003ctd\u003e400 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose Burst Pressure\u003c\/td\u003e\n      \u003ctd\u003e1200 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTire Inflator Gauge Options\u003c\/td\u003e\n      \u003ctd\u003eTrooper 0–60 Analog; Rubicon 1.5–60 Digital; Long-Haul 0–150 Analog; Work Horse 5–150 Digital; Racer Series 0–100 Precision Digital\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColors Available\u003c\/td\u003e\n      \u003ctd\u003eGloss Black, Candy Blue, Candy Red\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCO2 Recertification\u003c\/td\u003e\n      \u003ctd\u003eRequired every 5 years (US federal requirement); Power Tank guarantees bottles pass for life of bottle or replaces at no charge (physical damage after delivery excluded)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe 10 lb Dual Bottle CO2 system suits overlanders, trail runners, and off-road enthusiasts who air down for the trail and need to air up multiple large-format tires quickly at the end of a run, particularly those running 35-inch or larger tires who want the capacity to handle a full group or multiple trips without waiting for a compressor to cool down. It also works for anyone who needs trail-side air tool capability (impact wrenches, air lockers) without carrying a generator or a vehicle-mounted compressor.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis system requires local CO2 refill access. Confirm that a liquid CO2 refill source (fire extinguisher service, beverage carbonics, welding gas supply, hydroponics, or specialty aquarium) is available in your area before purchasing. A compatible vehicle mount is not included and must be purchased separately. The Super Bracket is included for mounting but does not attach to a vehicle without the corresponding vehicle-specific mount.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow many tires can the 10 lb Dual Bottle system air up?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank 10 lb Dual Bottle CO2 system is rated to air up 36 thirty-five-inch tires per fill, enough for four full trail runs with CO2 remaining for bead reseating or blowing out filters. Actual fill counts vary by tire size and the amount of pressure being added; Power Tank publishes a full tire fill chart and an online calculator for other tire sizes and pressure differentials.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow long does it take to air up a tire?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank 10 lb Dual Bottle system airs up a 35x12.50x17-inch tire by 15 psi in 38 seconds. Unlike a compressor, CO2 systems have no duty cycle and no heat buildup, so each tire inflates at the same rate regardless of how many tires have already been filled.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhere do I get the CO2 refilled?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003ePower Tank CO2 bottles must be refilled with liquid CO2 at a local refill source. Common refill locations include fire extinguisher service companies, beverage carbonics businesses, welding gas companies, hydroponics shops, and specialty aquarium stores. Confirm a refill source is available in your area before purchasing.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the CO2 cylinder recertification requirement?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eUS federal regulations require all gas cylinders to be recertified every five years or at the time of the next fill. Power Tank guarantees its bottles will pass recertification for the life of the bottle. If a bottle fails its five-year recertification test, Power Tank replaces it at no charge. This guarantee does not cover physical external damage that occurs after delivery. Recertification is best handled locally, through the same CO2 refill source used for tank refills.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan this system run air tools like an impact wrench?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Power Tank 10 lb Dual Bottle system's Super Flow regulator is built for both high flow and high pressure, and the Super Coupler accepts any air tool plug style. The system can run impact wrenches, air lockers, blow guns, and nail guns. The Super Coupler connects and disconnects at 0 psi, so switching between tools does not require bleeding the hose.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs a vehicle mount included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Super Bracket is included with the Power Tank 10 lb Dual Bottle system and provides the mounting interface for the bottles. However, the vehicle-specific mount that attaches the Super Bracket to a particular truck, Jeep, or SUV is sold separately. TerrainVault carries a range of compatible Power Tank vehicle mounts.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Gloss Black \/ Trooper - 0-60 Analog \/ 30 ft Coiled","offer_id":50621534142534,"sku":"PT10-CBKLA3C","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Trooper - 0-60 Analog \/ 30 ft Straight","offer_id":50621534175302,"sku":"PT10-CBKLA3S","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Rubicon - 1.5-60 Digital \/ 30 ft Coiled","offer_id":50621534208070,"sku":"PT10-CBKLD3C","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Rubicon - 1.5-60 Digital \/ 30 ft Straight","offer_id":50621534240838,"sku":"PT10-CBKLD3S","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Long-Haul - 0-150 Analog \/ 30 ft Coiled","offer_id":50621534273606,"sku":"PT10-CBKHA3C","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Long-Haul - 0-150 Analog \/ 30 ft Straight","offer_id":50621534306374,"sku":"PT10-CBKHA3S","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Work Horse - 5-150 Digital \/ 30 ft Coiled","offer_id":50621534339142,"sku":"PT10-CBKHD3C","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Work Horse - 5-150 Digital \/ 30 ft Straight","offer_id":50621534371910,"sku":"PT10-CBKHD3S","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Racer Series - 0-100 Precision Digital \/ 30 ft Coiled","offer_id":50621534404678,"sku":"PT10-CBKRS3C","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Racer Series - 0-100 Precision Digital \/ 30 ft Straight","offer_id":50621534437446,"sku":"PT10-CBKRS3S","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Trooper - 0-60 Analog \/ 30 ft Coiled","offer_id":50621534470214,"sku":"PT10-CCBLA3C","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Trooper - 0-60 Analog \/ 30 ft Straight","offer_id":50621534502982,"sku":"PT10-CCBLA3S","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Rubicon - 1.5-60 Digital \/ 30 ft Coiled","offer_id":50621534535750,"sku":"PT10-CCBLD3C","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Rubicon - 1.5-60 Digital \/ 30 ft Straight","offer_id":50621534568518,"sku":"PT10-CCBLD3S","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Long-Haul - 0-150 Analog \/ 30 ft Coiled","offer_id":50621534601286,"sku":"PT10-CCBHA3C","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Long-Haul - 0-150 Analog \/ 30 ft Straight","offer_id":50621534634054,"sku":"PT10-CCBHA3S","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Work Horse - 5-150 Digital \/ 30 ft Coiled","offer_id":50621534666822,"sku":"PT10-CCBHD3C","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Work Horse - 5-150 Digital \/ 30 ft Straight","offer_id":50621534699590,"sku":"PT10-CCBHD3S","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Racer Series - 0-100 Precision Digital \/ 30 ft Coiled","offer_id":50621534732358,"sku":"PT10-CCBRS3C","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Racer Series - 0-100 Precision Digital \/ 30 ft Straight","offer_id":50621534765126,"sku":"PT10-CCBRS3S","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Trooper - 0-60 Analog \/ 30 ft Coiled","offer_id":50621534797894,"sku":"PT10-CCRLA3C","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Trooper - 0-60 Analog \/ 30 ft Straight","offer_id":50621534830662,"sku":"PT10-CCRLA3S","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Rubicon - 1.5-60 Digital \/ 30 ft Coiled","offer_id":50621534863430,"sku":"PT10-CCRLD3C","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Rubicon - 1.5-60 Digital \/ 30 ft Straight","offer_id":50621534896198,"sku":"PT10-CCRLD3S","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Long-Haul - 0-150 Analog \/ 30 ft Coiled","offer_id":50621534928966,"sku":"PT10-CCRHA3C","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Long-Haul - 0-150 Analog \/ 30 ft Straight","offer_id":50621534961734,"sku":"PT10-CCRHA3S","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Work Horse - 5-150 Digital \/ 30 ft Coiled","offer_id":50621534994502,"sku":"PT10-CCRHD3C","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Work Horse - 5-150 Digital \/ 30 ft Straight","offer_id":50621535027270,"sku":"PT10-CCRHD3S","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Racer Series - 0-100 Precision Digital \/ 30 ft Coiled","offer_id":50621535060038,"sku":"PT10-CCRRS3C","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Racer Series - 0-100 Precision Digital \/ 30 ft Straight","offer_id":50621535092806,"sku":"PT10-CCRRS3S","price":1149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/PT10-5280-B_v3.jpg?v=1791934528"},{"product_id":"power-tank-nal-chuck-short-and-xl-rebuild-kit","title":"Power Tank NAL Chuck Short and XL Rebuild Kit","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank NAL Chuck Rebuild Kit supplies the seals and O-rings required to rebuild a NAL Chuck Short or NAL Chuck XL CO2 tire inflation chuck. When a chuck begins to leak or loses sealing performance, replacing worn seals and O-rings restores reliable function without replacing the entire chuck assembly. The kit covers both the Short and XL versions of the NAL Chuck.\u003c\/p\u003e\n\n\u003ch2\u003eRestore Performance Without Replacing the Chuck\u003c\/h2\u003e\n\u003cp\u003eA leaking or poorly sealing chuck undermines the precision that a CO2 inflation system is built around. The NAL Chuck Rebuild Kit addresses the root cause directly: worn seals and O-rings are the most common reason a chuck loses its seal, and replacing them brings the chuck back to proper working condition. Rebuilding rather than replacing preserves the investment already made in the NAL Chuck and keeps the inflation system ready for the next trip.\u003c\/p\u003e\n\n\u003ch2\u003eCovers Both NAL Chuck Variants\u003c\/h2\u003e\n\u003cp\u003eThe rebuild kit is designed for both the NAL Chuck Short and the NAL Chuck XL, so owners of either version can keep a single kit on hand without needing to stock separate rebuild parts for each chuck. Having the correct seals and O-rings available before a failure occurs means a chuck can be serviced in the shop rather than sidelined in the field.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeals and O-rings included:\u003c\/strong\u003e all the sealing components needed to complete a full NAL Chuck rebuild.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual compatibility:\u003c\/strong\u003e fits both the NAL Chuck Short and the NAL Chuck XL.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTargeted rebuild solution:\u003c\/strong\u003e addresses the most common cause of chuck leakage and sealing loss.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eContents\u003c\/td\u003e\n      \u003ctd\u003eSeals and O-rings\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Models\u003c\/td\u003e\n      \u003ctd\u003ePower Tank NAL Chuck Short, Power Tank NAL Chuck XL\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eNAL-RKIT\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe NAL Chuck Rebuild Kit is for owners of the Power Tank NAL Chuck Short or NAL Chuck XL who need to service a chuck that has developed a leak or lost sealing performance. It suits anyone who wants to maintain their CO2 tire inflation equipment proactively rather than waiting for a failure.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis kit is designed specifically for the NAL Chuck Short and NAL Chuck XL. It is not intended for other chuck models or third-party tire inflation chucks.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich chuck models does this rebuild kit fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank NAL Chuck Rebuild Kit fits two specific models: the NAL Chuck Short and the NAL Chuck XL. The kit fits the NAL Chuck Short and NAL Chuck XL only.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the NAL Chuck Rebuild Kit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe NAL Chuck Rebuild Kit includes the seals and O-rings needed to rebuild a NAL Chuck Short or NAL Chuck XL. These are the sealing components most commonly responsible for leakage or loss of sealing performance in the chuck.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow do I know when my NAL Chuck needs to be rebuilt?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eCommon signs that a NAL Chuck may need rebuilding include air leaking at the chuck connection during inflation or difficulty achieving a consistent seal on the valve stem. Replacing the seals and O-rings with the NAL Chuck Rebuild Kit addresses the most frequent cause of these issues.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621633462342,"sku":"NAL-RKIT","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/ChatGPTImageSep23_2026_08_29_23AM-sq.jpg?v=1791934906"},{"product_id":"power-tank-workman-power-shot-sidearm-co2-air-system","title":"Power Tank Power Shot Sidearm Portable CO2 Air System","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Workman Package with Power Shot Sidearm is a belt-mounted CO2 air system that delivers the equivalent output of a 50-gallon air tank at 120 psi from a single 20 oz CO2 bottle: no compressor, no power cord, no noise. It is configured at checkout with either a 160 psi standard Sidearm regulator or a 400 psi Pro Series regulator, and with zero, one, two, or six CO2 bottles depending on how much run time you need on the job or on the trail.\u003c\/p\u003e\n\u003cp class=\"product-shipping-note\"\u003e\u003cstrong\u003eShips empty:\u003c\/strong\u003e CO2 tanks cannot be shipped filled, so if your configuration includes a CO2 bottle it arrives empty. Have it filled with liquid CO2 at a local refill source (fire extinguisher service, welding gas supplier, beverage carbonics shop or paintball store) before first use.\u003c\/p\u003e\n\n\u003ch2\u003eSilent Power Wherever the Work Is\u003c\/h2\u003e\n\u003cp\u003eThe Power Shot Sidearm system runs entirely on CO2, which means it produces no engine noise and draws no electricity. For contractors working around clients, mechanics in tight bays, or overlanders airing up tires at a trailhead, that silence is a practical advantage, not a marketing point. The 20 oz bottle clips to a belt holster, keeping the air supply on your body rather than tethered to a compressor across the shop or campsite.\u003c\/p\u003e\n\n\u003ch2\u003eAdjustable Pressure for the Tool in Hand\u003c\/h2\u003e\n\u003cp\u003eThe Sidearm regulator uses Power Tank's Super Flow technology to let you dial output pressure precisely for each task. The standard 160 psi regulator covers the full range of common air tools: nail guns, rivet guns, grease guns, caulking guns, and tire inflators. The 400 psi Pro Series regulator extends the pressure ceiling for demanding applications, though it is not recommended for use with nail guns. The 10-foot braided coiled hose includes high-pressure-rated swivels at both ends to prevent tangling as you move.\u003c\/p\u003e\n\n\u003ch2\u003eScalable Bottle Count, Refillable Anywhere\u003c\/h2\u003e\n\u003cp\u003eSelecting two or six bottles at checkout increases total CO2 capacity without changing the system's footprint. Power Tank gear bags are included with multi-bottle packages to keep extras organized. Each 20 oz bottle can be refilled at most sporting goods stores or paintball shops. A Power Tank Power Shot Filling Station (ITT-2000), sold separately, allows self-refilling from a bulk CO2 source.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBelt-clip CO2 bottle:\u003c\/strong\u003e 20 oz Power Shot bottle with on\/off valve mounts to the included holster\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuper Flow regulator:\u003c\/strong\u003e Sidearm adjustable regulator in 160 psi standard or 400 psi Pro Series, same technology as full-size Power Tanks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e10 ft braided coiled hose:\u003c\/strong\u003e high-pressure-rated swivels at both ends prevent tangling\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo electricity required:\u003c\/strong\u003e runs silently with no compressor, no power cord, no air lines\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eScalable capacity:\u003c\/strong\u003e configure with one, two, or six bottles; gear bags included with multi-bottle packages\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBroad tool compatibility:\u003c\/strong\u003e nail gun, rivet gun, grease gun, caulking gun, and tire inflator (160 psi regulator); 400 psi Pro not recommended for nail guns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBottle size\u003c\/td\u003e\n      \u003ctd\u003e20 oz CO2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEquivalent output\u003c\/td\u003e\n      \u003ctd\u003e50-gallon air tank at 120 psi per bottle\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRegulator options\u003c\/td\u003e\n      \u003ctd\u003e160 psi standard Sidearm; 400 psi Pro Series Sidearm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose length\u003c\/td\u003e\n      \u003ctd\u003e10 ft braided coiled\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose fittings\u003c\/td\u003e\n      \u003ctd\u003eHigh-pressure-rated swivels at both ends\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCoupler included\u003c\/td\u003e\n      \u003ctd\u003ePower Flow 3\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eChuck included\u003c\/td\u003e\n      \u003ctd\u003eTire air chuck\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHolster included\u003c\/td\u003e\n      \u003ctd\u003eYes\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eGear bags\u003c\/td\u003e\n      \u003ctd\u003eIncluded with 2-bottle and 6-bottle packages\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBottle quantity options\u003c\/td\u003e\n      \u003ctd\u003e0 (bring your own), 1, 2, or 6\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePower source\u003c\/td\u003e\n      \u003ctd\u003eCO2 (no electricity)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Power Shot Sidearm Workman Package suits mechanics, contractors, pit crews, and overlanders who need portable, silent compressed air without access to a compressor or electrical outlet. It handles tire inflation and a wide range of air tools from a belt-mounted bottle, making it practical in tight work areas, remote campsites, and client-facing job sites alike.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe 400 psi Pro Series regulator is not recommended for use with nail guns. The Power Shot Filling Station (ITT-2000) required for self-refilling is sold separately and is not included in any Workman Package. Buyers who select the \"bring your own\" bottle option receive the regulator, holster, hose, coupler, chuck, and valve cap only, with no CO2 bottles.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat air tools can the Power Shot Sidearm run?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Shot Sidearm with the 160 psi standard regulator is compatible with nail guns, rivet guns, grease guns, caulking guns, and tire inflators. The 400 psi Pro Series regulator covers the same tools except nail guns, which Power Tank does not recommend pairing with the Pro regulator.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between the 160 psi and 400 psi regulators?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eBoth Sidearm regulators use Power Tank's Super Flow technology and allow adjustable output pressure. The standard regulator tops out at 160 psi and is compatible with the full range of common air tools including nail guns. The 400 psi Pro Series regulator raises the pressure ceiling for higher-demand applications but is not recommended for nail guns.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Power Shot system require electricity or an air compressor?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Power Shot Sidearm runs entirely on CO2 stored in the 20 oz bottle. It requires no electrical connection, no external air lines, and no compressor. The system operates silently, which makes it practical for client-facing job sites and noise-sensitive environments.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow do I refill the CO2 bottles?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach 20 oz Power Shot bottle can be refilled at most sporting goods stores or paintball shops. For self-refilling from a bulk CO2 source, Power Tank offers the Power Shot Filling Station (ITT-2000), which is sold separately and is not included in the Workman Package.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the Workman Package?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEvery Workman Package includes a Sidearm regulator (160 psi standard or 400 psi Pro, per your selection), a holster, a 10-foot braided coiled hose with high-pressure-rated swivels, a Power Flow 3 coupler, a tire air chuck, and a valve cap. Packages with two or six bottles also include Power Tank gear bags. The \"bring your own\" option ships without any CO2 bottles.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"160 psi regulator (standard) \/ 2 20 oz","offer_id":50621634510918,"sku":"PS01-3150-MBK-C","price":449.99,"currency_code":"USD","in_stock":true},{"title":"160 psi regulator (standard) \/ 6 20oz","offer_id":50621634543686,"sku":"PS01-3160-MBK-C","price":649.99,"currency_code":"USD","in_stock":true},{"title":"160 psi regulator (standard) \/ None thanks I'll bring my own!","offer_id":50621634576454,"sku":"PS01-3100-MBK-C","price":299.99,"currency_code":"USD","in_stock":true},{"title":"400 psi PRO series (+$30) \/ 1 20 oz","offer_id":50621634609222,"sku":"PS01-3140-MBK-P","price":379.99,"currency_code":"USD","in_stock":true},{"title":"400 psi PRO series (+$30) \/ 2 20 oz","offer_id":50621634641990,"sku":"PS01-3150-MBK-P","price":479.99,"currency_code":"USD","in_stock":true},{"title":"400 psi PRO series (+$30) \/ 6 20oz","offer_id":50621634674758,"sku":"PS01-3160-MBK-P","price":679.99,"currency_code":"USD","in_stock":true},{"title":"400 psi PRO series (+$30) \/ None thanks I'll bring my own!","offer_id":50621634707526,"sku":"PS01-3100-MBK-P","price":329.99,"currency_code":"USD","in_stock":true},{"title":"160 psi regulator (standard) \/ 1 20 oz","offer_id":50621634740294,"sku":"PS01-3140-MBK-C","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/PS01-3150-MBK-CUPDATE_c66bc427-84e1-496e-a515-4d381cd85ec3.jpg?v=1792012515"},{"product_id":"power-tank-power-shot-20-oz-co2-tire-repair-kit","title":"Power Tank Power Shot 20 oz CO2 Tire Repair Kit","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Power Shot 20 oz CO2 Tire Repair Kit is an all-in-one flat repair system that combines a CO2 inflation source, plug repair tools, a digital pressure gauge, and a zippered storage bag in a single portable kit. The kit is available in two repair-tool tiers (Mini and Pro Series) and with one CO2 bottle, two CO2 bottles, or no bottle for buyers who already own a compatible 20 oz pin-valve bottle.\u003c\/p\u003e\n\u003cp class=\"product-shipping-note\"\u003e\u003cstrong\u003eShips empty:\u003c\/strong\u003e CO2 tanks cannot be shipped filled, so if your configuration includes a CO2 bottle it arrives empty. Have it filled with liquid CO2 at a local refill source (fire extinguisher service, welding gas supplier, beverage carbonics shop or paintball store) before first use.\u003c\/p\u003e\n\n\u003ch2\u003eFast Inflation Without a Power Source\u003c\/h2\u003e\n\u003cp\u003eThe 20 oz Power Shot CO2 bottle delivers enough pressure to inflate even large SUV tires in seconds, with no compressor, no 12-volt hookup, and no waiting for a service truck. The included Power Trigger Regulator screws directly onto the bottle and attaches to the valve stem, so the entire inflation step takes moments once the tire is plugged. A single 20 oz bottle is rated to air up approximately 3 to 5 tires before it needs a refill.\u003c\/p\u003e\n\n\u003ch2\u003eComplete Flat Repair in One Kit\u003c\/h2\u003e\n\u003cp\u003eThe Power Shot kit covers every step of a roadside plug repair: pull the cause of the flat with the included pliers, widen the puncture with the reamer, seat a plug to stop the leak, then inflate and verify pressure with the included Small Digital Tire Pressure Gauge (0–100 psi). Having all of these components together in one zippered bag means no hunting for a separate plug kit or gauge at the side of the road.\u003c\/p\u003e\n\n\u003ch2\u003eRefillable CO2 Bottle\u003c\/h2\u003e\n\u003cp\u003eThe 20 oz Power Shot bottle with pin valve is refillable at most sporting goods stores and paintball shops, so the kit is not a single-use item. When the bottle is empty, bring it in for a refill and the entire system is ready to use again.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e20 oz CO2 bottle:\u003c\/strong\u003e pin-valve Power Shot bottle in matte black (1 or 2 bottles depending on variant; omitted in the no-bottle variant)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Trigger Regulator:\u003c\/strong\u003e screws onto the bottle and attaches to the valve stem for one-handed inflation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlug repair tools:\u003c\/strong\u003e Mini or Pro Series tire repair kit (pliers, reamer, plugs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHose and chuck:\u003c\/strong\u003e included for connection to the valve stem\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSmall Digital Tire Pressure Gauge:\u003c\/strong\u003e 0–100 psi range\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eZippered storage bag:\u003c\/strong\u003e keeps all components together\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCO2 bottle size\u003c\/td\u003e\n      \u003ctd\u003e20 oz\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBottle valve type\u003c\/td\u003e\n      \u003ctd\u003ePin valve\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eGauge range\u003c\/td\u003e\n      \u003ctd\u003e0–100 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColor\u003c\/td\u003e\n      \u003ctd\u003eMatte Black\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVariants\u003c\/td\u003e\n      \u003ctd\u003ePro Series \/ 1 bottle (PTM-0126); Pro Series \/ 2 bottles; Mini \/ 1 bottle (PTM-0125); Mini \/ no bottle (PTM-0100)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApproximate fills per bottle\u003c\/td\u003e\n      \u003ctd\u003e3–5 tires\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Power Tank Power Shot kit suits drivers, overlanders, and off-road enthusiasts who want a self-contained flat repair solution that works without a compressor or electrical hookup, including those who carry no spare or carry a spare at unknown pressure. It is compact enough to store in a glovebox, center console, or gear bag.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe PTM-0100 (no-bottle) variant does not include a CO2 bottle; buyers selecting that variant must supply their own 20 oz pin-valve CO2 bottle separately. The kit addresses punctures that can be plugged from the outside of the tire; it is not a patch kit and is not designed for sidewall damage or blowouts.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between the Mini and Pro Series repair kit tiers?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eBoth the Mini and Pro Series Power Shot kits include the CO2 bottle, Power Trigger Regulator, hose and chuck, digital pressure gauge, and zippered bag. The two tiers differ in the tire plug repair tools included; the specific contents of each tier are not detailed in the available product data, so contact TerrainVault before ordering if the repair-tool selection is a deciding factor.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow many tires can one 20 oz CO2 bottle inflate?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank Power Shot 20 oz bottle is rated to air up approximately 3 to 5 tires before it needs a refill. Actual fill count will vary with tire size and starting pressure; larger tires or lower starting pressures will reduce the number of fills per bottle.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhere can the CO2 bottle be refilled?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 20 oz Power Shot pin-valve CO2 bottle can be refilled at most sporting goods stores and paintball shops. The bottle is not single-use, so the kit remains functional after each refill.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the kit work on truck or SUV tires?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank Power Shot kit is designed to inflate even large SUV tires from a single 20 oz CO2 bottle. The kit is not vehicle-specific and is not limited to passenger car tires; buyers with very large truck or off-road tires should note that fill count per bottle will be lower than for smaller tires.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan I buy the kit without a CO2 bottle?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The PTM-0100 variant (Mini Tire Repair Kit, no bottle) is available for buyers who already own a compatible 20 oz pin-valve CO2 bottle. That variant includes the Mini repair tools, Power Trigger Regulator, hose and chuck, pressure gauge, and zippered bag, but no CO2 bottle.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Pro Series Tire Repair Kit \/ 1 20oz bottle","offer_id":50621635756102,"sku":"PTM-0126","price":239.99,"currency_code":"USD","in_stock":true},{"title":"Pro Series Tire Repair Kit \/ 2 20oz bottles","offer_id":50621635788870,"sku":null,"price":299.99,"currency_code":"USD","in_stock":true},{"title":"Mini Tire Repair Kit \/ 1 20oz bottle","offer_id":50621635821638,"sku":"PTM-0125","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Mini Tire Repair Kit \/ None thanks I'll bring my own!","offer_id":50621635854406,"sku":"PTM-0100","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/PTM-0125IMAGE2.jpg?v=1791935042"},{"product_id":"power-tank-sig-hard-case-for-nitrogen-shock-inflator-gauge","title":"Power Tank SIG Hard Case for Nitrogen Shock Inflator Gauge","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank SIG Hard Case is a lockable storage case with custom foam cutouts designed to protect and organize the Shock Inflator Gauge (SIG) and its swappable attachments during transport and trail use. The case accommodates all SIG models and provides dedicated cutouts for every available attachment, keeping the full nitrogen shock inflation kit in one location. The Shock Inflator Gauge and all attachments are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eProtected Where It Counts\u003c\/h2\u003e\n\u003cp\u003eNitrogen shock inflation tools are precision instruments, and a hard lockable case keeps the Shock Inflator Gauge shielded from the knocks, dust, and moisture that come with overland travel. Locking the case keeps the gauge where it belongs in a shared rig or a busy shop, so it is there when needed.\u003c\/p\u003e\n\n\u003ch2\u003eEvery Attachment Has a Home\u003c\/h2\u003e\n\u003cp\u003eThe SIG Hard Case includes custom foam cutouts for the Schrader Valve Extension, PT Wrench, Shock Fill Needle Assembly, and spare O-rings alongside the gauge itself. Having dedicated slots for each piece means swappable chucks and small components do not rattle loose or go missing between uses. The organized layout also makes it immediately clear if anything is missing before heading out.\u003c\/p\u003e\n\n\u003ch2\u003eFits Every SIG Model\u003c\/h2\u003e\n\u003cp\u003eThe foam layout is sized for all current Shock Inflator Gauge models, so the case remains compatible if the gauge is upgraded to a newer SIG version. Buyers who add attachments over time will find cutouts already waiting for each one.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable hard case:\u003c\/strong\u003e secures the SIG and attachments against loss or unauthorized access\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCustom foam cutouts:\u003c\/strong\u003e dedicated slots for the SIG (all models), Schrader Valve Extension, PT Wrench, Shock Fill Needle Assembly, and spare O-rings\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAll-model SIG compatibility:\u003c\/strong\u003e foam layout fits every current Shock Inflator Gauge version\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentralized storage:\u003c\/strong\u003e keeps the complete nitrogen shock inflation kit organized in one case\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBrand\u003c\/td\u003e\n      \u003ctd\u003ePower Tank\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eSIG-CASE\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eClosure\u003c\/td\u003e\n      \u003ctd\u003eLockable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFoam Cutouts Included\u003c\/td\u003e\n      \u003ctd\u003eShock Inflator Gauge (all models), Schrader Valve Extension, PT Wrench, Shock Fill Needle Assembly, Spare O-Rings\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eContents\u003c\/td\u003e\n      \u003ctd\u003eCase only. SIG and attachments sold separately.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe SIG Hard Case suits overlanders and off-road enthusiasts who own a Power Tank Shock Inflator Gauge and want organized, lockable protection for the gauge and its attachments during trail runs, shop storage, or travel.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis case is sized and cut specifically for the Shock Inflator Gauge and its attachments. It is not designed to fit Ventoso tire inflator gauges, CO2 regulators, or other Power Tank tools. The Shock Inflator Gauge and all attachments are not included.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this case fit all versions of the Shock Inflator Gauge?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe SIG Hard Case is designed to fit all current Shock Inflator Gauge models. The foam cutouts accommodate every available swappable chuck and attachment for the SIG line, so the case remains compatible as the gauge or its accessories are updated.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat attachments have dedicated foam cutouts in this case?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe SIG Hard Case includes custom foam cutouts for the Shock Inflator Gauge body, the Schrader Valve Extension, the PT Wrench, the Shock Fill Needle Assembly, and spare O-rings. Each piece has its own slot to prevent movement and make it easy to confirm the kit is complete before heading out.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Shock Inflator Gauge or any attachments come with this case?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The SIG Hard Case ships as the case only. The Shock Inflator Gauge, Schrader Valve Extension, PT Wrench, Shock Fill Needle Assembly, and O-rings are all sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill this case fit a Ventoso tire inflator gauge or a CO2 regulator?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe SIG Hard Case is not designed for Ventoso tire inflator gauges, CO2 regulators, or other Power Tank tools. The foam cutouts are sized specifically for the Shock Inflator Gauge and its dedicated attachments.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621636182086,"sku":"SIG-CASE","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/1T9A1330-sq.jpg?v=1791935080"},{"product_id":"power-tank-nit-shock-boss-rebuild-kit","title":"Power Tank NIT Shock Boss Rebuild Kit","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank NIT Shock Boss Rebuild Kit is a set of replacement O-rings designed to restore the sealing performance of the NIT Shock Boss nitrogen shock inflation tool. When the original O-rings wear or degrade, this kit provides like-kind replacements to get the tool back in service.\u003c\/p\u003e\n\n\u003ch2\u003eKeep Your Shock Inflation Tool Ready\u003c\/h2\u003e\n\u003cp\u003eThe NIT Shock Boss relies on a tight O-ring seal to deliver accurate nitrogen pressure into shocks and struts. Worn or damaged O-rings cause pressure loss and inconsistent fills. Replacing them with this rebuild kit restores the tool's ability to hold and transfer pressure correctly, so nitrogen shock service stays reliable in the field or in the shop.\u003c\/p\u003e\n\n\u003ch2\u003eMatched to the Original\u003c\/h2\u003e\n\u003cp\u003eThe replacement O-rings in this kit are the same type as those supplied in the bottom layer of foam in the original NIT Shock Boss kit packaging. Using matched replacements rather than generic hardware reduces the risk of fitment issues or premature seal failure.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReplacement O-rings:\u003c\/strong\u003e same specification as the O-rings originally included with the NIT Shock Boss kit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFoam-layer reference:\u003c\/strong\u003e O-rings correspond to those found in the bottom foam layer of the original kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Tool\u003c\/td\u003e\n      \u003ctd\u003ePower Tank NIT Shock Boss\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eContents\u003c\/td\u003e\n      \u003ctd\u003eReplacement O-ring set\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eNIT-RKIT\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis kit is for owners of the Power Tank NIT Shock Boss nitrogen shock inflation tool who need to replace worn or damaged O-rings to restore proper sealing function.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis kit does not include the NIT Shock Boss tool itself.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the NIT Shock Boss Rebuild Kit include?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank NIT Shock Boss Rebuild Kit includes a set of replacement O-rings that match the O-rings originally supplied in the bottom layer of foam in the NIT Shock Boss kit. The exact count of O-rings in the set is not specified.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich tool does this rebuild kit fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThis rebuild kit is designed for the Power Tank NIT Shock Boss nitrogen shock inflation tool.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow do I know when the O-rings need to be replaced?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eOn a nitrogen shock inflation tool like the NIT Shock Boss, O-rings typically need replacement when the tool no longer holds pressure correctly or shows signs of leaking at the seal points. Consult the NIT Shock Boss documentation for service intervals specific to that tool.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621637001286,"sku":"NIT-RKIT","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/ChatGPTImageSep4_2026_09_05_45AM-sq.jpg?v=1791935161"},{"product_id":"power-tank-ventoso-red-tire-inflator-gauge-hard-case","title":"Power Tank Ventoso RED Tire Inflator Gauge Hard Case","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Ventoso RED Tire Inflator Gauge Hard Case is a lockable, foam-fitted protective case designed to store and organize the Ventoso and Ventoso RED Tire Inflator Gauge alongside every available swappable chuck and common accessory. Custom foam cutouts hold each item securely in place, keeping a full tire-inflation kit consolidated and ready after even the dirtiest trail day. The Ventoso Tire Inflator Gauge and all chucks and attachments are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eOne Case for the Whole Kit\u003c\/h2\u003e\n\u003cp\u003eA precision tire inflator gauge is an investment, and a case built around it protects that investment between uses. The Ventoso RED Hard Case uses custom foam cutouts rather than generic padding, so the gauge and each chuck sit in a dedicated pocket rather than shifting and contacting each other in transit. After a trail run, everything goes back to its assigned spot. Nothing rattles loose, nothing gets lost in a gear bag.\u003c\/p\u003e\n\n\u003ch2\u003eOrganized for Quick Chuck Swaps\u003c\/h2\u003e\n\u003cp\u003eThe Ventoso system's strength is its interchangeable chuck lineup, and the Hard Case is sized to hold all of them together. Cutouts accommodate the HiPPO3 Chuck for Schrader valve stems, the Dual-Head Angle Chuck for dually wheels and motorcycles, the Dual-Head Straight Chuck for Alcoa dually wheels, and the Monster Chuck for Monster Valves, plus the RED Mods Blow Gun Kit, a 2 ft Hose Extension, and spare AAA and 9v batteries. Keeping the full chuck set in one case means the right chuck is always at hand when tire type or vehicle changes on a trip.\u003c\/p\u003e\n\n\u003ch2\u003eLockable for Vehicle and Camp Storage\u003c\/h2\u003e\n\u003cp\u003eThe case includes a lock mechanism, allowing it to be secured in a vehicle storage compartment or at a campsite. A lockable case also makes it easier to check the kit as luggage or store it in a shared vehicle without worrying about loose accessories walking off.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable hard case:\u003c\/strong\u003e secures the full kit in vehicle storage or at camp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCustom foam cutouts:\u003c\/strong\u003e dedicated pockets for the TIG body, all available swappable chucks, spare batteries, Blow Gun Kit, and 2 ft Hose Extension\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal TIG fit:\u003c\/strong\u003e cutouts accommodate Ventoso and Ventoso RED Tire Inflator Gauge, all models\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChuck coverage:\u003c\/strong\u003e fits HiPPO3, Dual-Head Angle, Dual-Head Straight, and Monster Chuck\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBattery storage:\u003c\/strong\u003e dedicated cutouts for AAA and 9v spare batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eTIG-CASE-v2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShipping Weight\u003c\/td\u003e\n      \u003ctd\u003e3 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Gauges\u003c\/td\u003e\n      \u003ctd\u003eVentoso and Ventoso RED Tire Inflator Gauge, all models\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eChuck Cutouts\u003c\/td\u003e\n      \u003ctd\u003eHiPPO3, Dual-Head Angle, Dual-Head Straight, Monster Chuck\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAdditional Cutouts\u003c\/td\u003e\n      \u003ctd\u003eAAA batteries, 9v batteries, RED Mods TIG Blow Gun Kit, 2 ft Hose Extension\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLocking\u003c\/td\u003e\n      \u003ctd\u003eLockable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eContents\u003c\/td\u003e\n      \u003ctd\u003eCase only. TIG, chucks, and attachments sold separately.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Ventoso RED Hard Case suits Ventoso and Ventoso RED Tire Inflator Gauge owners who run multiple chuck types and want a single organized, lockable home for their full inflation kit, particularly overlanders and off-road drivers who carry the gauge in a vehicle and swap chucks regularly across different wheel and valve types.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe case does not include the Ventoso Tire Inflator Gauge, any chuck, the Blow Gun Kit, the Hose Extension, or batteries. All are sold separately. The case is designed specifically for the Ventoso TIG system and is not a general-purpose tool case.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this case fit all Ventoso TIG models?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Ventoso RED Hard Case includes foam cutouts sized for the Ventoso and Ventoso RED Tire Inflator Gauge across all models in those lines. Buyers with an older or different Power Tank TIG model should confirm their gauge body matches the Ventoso form factor before purchasing.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat accessories have dedicated foam cutouts in the case?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Hard Case has individual foam cutouts for the HiPPO3 Chuck (Schrader valve stems), Dual-Head Angle Chuck (dually wheels and motorcycles), Dual-Head Straight Chuck (Alcoa dually wheels), Monster Chuck (Monster Valves), the RED Mods TIG Blow Gun Kit, a 2 ft Hose Extension, and spare AAA and 9v batteries. All of those items are sold separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs the Ventoso Tire Inflator Gauge included with the case?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Ventoso RED Hard Case is sold as a case only. The Ventoso Tire Inflator Gauge, all swappable chucks, the Blow Gun Kit, the Hose Extension, and batteries are each sold separately and are not included in this purchase.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the case be locked?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Ventoso RED Hard Case is lockable, allowing the kit to be secured in a vehicle storage compartment, a trailer, or at a campsite. Lock hardware is not listed as an included item; verify what is included at purchase if a lock is needed.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621638606918,"sku":"TIG-CASE-v2","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/1T9A1340-sq_6d1cad24-7eda-4541-b185-c4ac3d6ad6d5.jpg?v=1792012818"},{"product_id":"power-tank-blackout-10-lb-co2-tire-inflation-system-limited-edition","title":"Power Tank Blackout 10 lb CO2 Tire Inflation System Limited Edition","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Blackout Limited Edition is a 10 lb CO2 tire inflation system finished in matte black with blacked-out and chrome details. Built around Power Tank's Super Flow Regulator XP400, it delivers a 45 cfm flow rate (roughly eight times the output of a high-end 12V compressor) and has been tested to reseat tires up to 46 inches. The package ships with a full complement of hardware: regulator, handle, cylinder, bracket, 30 ft hose, coupler, Ventoso RED Tire Inflator Gauge, and a hard case for the gauge and its attachments.\u003c\/p\u003e\n\u003cp class=\"product-shipping-note\"\u003e\u003cstrong\u003eShips empty:\u003c\/strong\u003e CO2 tanks cannot be shipped filled, so the CO2 bottle in this package arrives empty. Have it filled with liquid CO2 at a local refill source (fire extinguisher service, welding gas supplier, beverage carbonics shop or paintball store) before first use.\u003c\/p\u003e\n\n\u003ch2\u003eCO2 Flow That Outpaces 12V Compressors\u003c\/h2\u003e\n\u003cp\u003eThe Super Flow Regulator XP400 at the heart of this system is adjustable for both output pressure and flow rate simultaneously, producing 45 cfm of airflow. High-end 12V compressors typically deliver 5–6 cfm, so the Power Tank Blackout can air up a 35-inch tire from 15 psi to 25 psi in roughly 19 seconds, a pace that matters when airing up four tires trailside before a long highway run home. The regulator is guaranteed to never freeze-clog and carries a limited lifetime warranty.\u003c\/p\u003e\n\n\u003ch2\u003eA Complete Kit, Ready to Mount\u003c\/h2\u003e\n\u003cp\u003eThe Blackout package includes every component needed to go from unboxing to mounted and operational: the XP400 regulator, a 6061-aluminum Power Grip Guard Handle that shields the valve and regulator from impacts, a 10 lb Armorcoat CO2 cylinder (aluminum body, nickel-plated valve), a Tank Boot, a 30 ft Duro-Braid straight hose with swivels at both ends, a Super Coupler, and the dual-strap COMP2 Bracket (BKT-2264) rated for high-speed and competition use. The Ventoso RED Tire Inflator Gauge (60 psi, 5-year warranty) and the new TIG Hard Case V2 with custom-cut foam round out the kit. The regulator, handle, and cylinder each carry a limited lifetime warranty; if the cylinder fails its 5-year recertification test, Power Tank replaces it at no charge.\u003c\/p\u003e\n\n\u003ch2\u003ePortable Across Every Vehicle in Your Fleet\u003c\/h2\u003e\n\u003cp\u003eBecause the Power Tank Blackout runs on CO2 rather than 12V power, it needs no power cables or external air lines to operate. The self-contained system can be moved between vehicles, carried down a trail to assist another rig, or transferred from a chase truck to a race vehicle in seconds. The COMP2 dual-strap bracket holds the tank securely at speed; if a different mounting solution suits a specific build, the bracket can be swapped for other Power Tank-compatible mounts. The system can be mounted in any orientation as long as the valves are properly closed when not in use. Horizontal mounting while in use requires the addition of a snorkel tube, sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuper Flow Regulator XP400:\u003c\/strong\u003e adjustable output pressure and flow rate, 45 cfm, freeze-clog-proof, limited lifetime warranty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e10 lb Armorcoat CO2 Cylinder:\u003c\/strong\u003e aluminum construction with nickel-plated valve, limited lifetime warranty, free replacement if it fails 5-year recertification\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVentoso RED Tire Inflator Gauge (60 psi):\u003c\/strong\u003e modular design with quick-switch chuck compatibility for dually wheels and Monster Valves; chuck attachments sold separately; 5-year warranty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTIG Hard Case V2:\u003c\/strong\u003e custom-cut foam interior sized for the Ventoso gauge and its attachments\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e30 ft Duro-Braid Straight Hose:\u003c\/strong\u003e rated for cold temperatures and high pressures, swivels at both ends, reaches all four corners of a vehicle without dismounting the tank\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-Strap COMP2 Bracket (BKT-2264):\u003c\/strong\u003e designed for high-speed and competition driving, included for secure vehicle mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCO2 Tank Capacity\u003c\/td\u003e\n      \u003ctd\u003e10 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHeight (with handle)\u003c\/td\u003e\n      \u003ctd\u003e24 in.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBottle Diameter\u003c\/td\u003e\n      \u003ctd\u003e6.9 in.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEmpty Weight\u003c\/td\u003e\n      \u003ctd\u003e~17 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFull Weight\u003c\/td\u003e\n      \u003ctd\u003e~27 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUsable Energy Equivalent\u003c\/td\u003e\n      \u003ctd\u003e400 gal at 150 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFlow Rate\u003c\/td\u003e\n      \u003ctd\u003e45 cfm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTire Reseat Tested To\u003c\/td\u003e\n      \u003ctd\u003e46 in. tires\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose Length\u003c\/td\u003e\n      \u003ctd\u003e30 ft\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInflator Gauge Max Pressure\u003c\/td\u003e\n      \u003ctd\u003e60 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHandle Material\u003c\/td\u003e\n      \u003ctd\u003e6061 aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCylinder Material\u003c\/td\u003e\n      \u003ctd\u003eAluminum with nickel-plated valve (Armorcoat finish)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRegulator Warranty\u003c\/td\u003e\n      \u003ctd\u003eLimited lifetime\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHandle Warranty\u003c\/td\u003e\n      \u003ctd\u003eLimited lifetime\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCylinder Warranty\u003c\/td\u003e\n      \u003ctd\u003eLimited lifetime\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTire Inflator Gauge Warranty\u003c\/td\u003e\n      \u003ctd\u003e5 years\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eMatte black with chrome details (limited edition)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003ePT10-BE-MB\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Power Tank Blackout 10 lb system suits overlanders, off-road racers, and four-wheel-drive enthusiasts who air down for the trail and need to air up quickly at the end of a run, particularly those running 33- to 46-inch tires where a 12V compressor's output is too slow to be practical. The dual-strap COMP2 bracket and portable, cable-free design make it equally at home in a dedicated trail rig or moved between multiple vehicles in a fleet.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Ventoso RED Tire Inflator's quick-switch chuck attachments for dually wheels and Monster Valves are not included and must be purchased separately. Horizontal mounting while the system is in use requires a snorkel tube upgrade, sold separately. This system does not include a vehicle-specific mount. Buyers who need a mount for a particular make and model will need to add a compatible Power Tank vehicle bracket.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow fast does the Power Tank Blackout air up a 35-inch tire?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank Blackout 10 lb system can inflate a 35-inch tire from 15 psi to 25 psi (adding 10 psi) in approximately 19 seconds, according to Power Tank's published air-up data. Inflation time increases with the amount of pressure being added; the same tire takes approximately 38 seconds to gain 15 psi (from 15 psi trail pressure to 30 psi street pressure).\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow many tires can the 10 lb CO2 tank fill before needing a refill?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eAccording to Power Tank's tire fill data, the 10 lb cylinder in the Blackout system can air up approximately 30 tires of 35-inch diameter when adding 10 psi per tire. Fill counts decrease as the amount of pressure added per tire increases; consult Power Tank's tire fill chart for counts specific to your tire size and pressure range.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the Power Tank Blackout package?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank Blackout Limited Edition includes the Super Flow Regulator XP400, a 6061-aluminum Power Grip Guard Handle, a 10 lb Armorcoat CO2 cylinder, a Tank Boot, a 30 ft Duro-Braid straight hose, a Super Coupler, the dual-strap COMP2 Bracket (BKT-2264), the Ventoso RED Tire Inflator Gauge (60 psi), and the TIG Hard Case V2 with custom-cut foam. Chuck attachments for dually wheels or Monster Valves are not included.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the Power Tank Blackout be mounted horizontally?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank Blackout CO2 system can be stored or transported in any orientation as long as the valves are fully closed. If the system will be mounted and actively used in a horizontal position, a snorkel tube upgrade is required and must be purchased separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhere can the 10 lb CO2 cylinder be refilled?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 10 lb Armorcoat CO2 cylinder in the Power Tank Blackout can be refilled at fire extinguisher service shops, welding supply stores, and beverage carbonic suppliers.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the Power Tank Blackout run air tools?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank Blackout's 45 cfm Super Flow Regulator XP400 produces enough output to run air tools at full power. As a reference point, the 10 lb CO2 cylinder can remove approximately 360 lug nuts using a 1\/2-inch impact wrench before the tank needs refilling, based on Power Tank's published air tool capacity data.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621639557190,"sku":"PT10-BE-MB","price":879.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/1T9A1246_1_229c8142-81c2-4feb-a8e9-a08be9720dd6-sq.jpg?v=1791935364"},{"product_id":"power-tank-3000-psi-super-flow-regulator-replacement-gauge","title":"Power Tank 3000 PSI Super Flow Regulator Replacement Gauge","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank 3000 PSI replacement top gauge is a direct-fit repair part for any Power Tank Super Flow CO2 regulator, regardless of the regulator's age. At 1.5 inches in diameter with 1\/8\" NPT threads and silicone-filled internals, it threads into the regulator's top gauge port without adapters or modification. A rubber boot is included as stock allows; Power Tank has discontinued boot restocking, so some units ship without one.\u003c\/p\u003e\n\n\u003ch2\u003eSilicone Fill for Legible Readings in the Field\u003c\/h2\u003e\n\u003cp\u003eSilicone-filled gauges use fluid inside the housing to dampen needle movement, reducing the vibration-related wear that can make a dry gauge hard to read on rough terrain. The fill also resists internal fogging caused by moisture or rapid temperature changes, keeping the pressure reading visible when it matters most. These properties make silicone fill the standard choice for gauges used in demanding off-road and outdoor environments.\u003c\/p\u003e\n\n\u003ch2\u003eDirect Fit Across the Super Flow Lineup\u003c\/h2\u003e\n\u003cp\u003eThe 1\/8\" NPT thread is a direct match for the top gauge port on every Power Tank Super Flow regulator produced to date, so there is no need to match a production year or generation before ordering. The 1.5-inch diameter face fits the same footprint as the original gauge, keeping the regulator's profile unchanged after the swap.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3000 PSI rating:\u003c\/strong\u003e matches the pressure range of Power Tank Super Flow CO2 regulators\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.5 in. diameter face:\u003c\/strong\u003e same footprint as the original top gauge\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1\/8\" NPT threads:\u003c\/strong\u003e direct thread-in fit, no adapters required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSilicone-filled internals:\u003c\/strong\u003e dampens needle vibration and resists internal fogging\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRubber boot:\u003c\/strong\u003e included as stock allows; boots will not be restocked by Power Tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePressure Rating\u003c\/td\u003e\n      \u003ctd\u003e3000 PSI\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eGauge Diameter\u003c\/td\u003e\n      \u003ctd\u003e1.5 in.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThread Size\u003c\/td\u003e\n      \u003ctd\u003e1\/8\" NPT\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFill Type\u003c\/td\u003e\n      \u003ctd\u003eSilicone filled\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRubber Boot\u003c\/td\u003e\n      \u003ctd\u003eIncluded as stock allows; will not be restocked\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Regulators\u003c\/td\u003e\n      \u003ctd\u003ePower Tank Super Flow regulators (all production ages)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis gauge suits any Power Tank Super Flow CO2 regulator owner who needs to replace a broken, cracked, or unreadable top gauge. Because it fits the full Super Flow lineup regardless of age, it works as a long-term spare as well as an immediate repair part.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis gauge is not compatible with regulators from other brands or with regulators that use a different port thread standard than 1\/8\" NPT. It does not include a rubber boot when boot stock is depleted, and Power Tank will not restock boots; buyers who require a boot should confirm availability before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich regulators does this gauge fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank 3000 PSI replacement top gauge is a direct fit for any Power Tank Super Flow CO2 regulator, regardless of when the regulator was manufactured. It uses 1\/8\" NPT threads and installs into the regulator's top gauge port without adapters or modification. It is not designed for regulators from other brands or for regulators that use a different port thread standard.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs the rubber boot always included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eA rubber boot ships with the Power Tank replacement gauge as stock allows. Power Tank has stated that boot inventory will not be restocked, so some units may arrive without one. The gauge functions identically with or without the boot; the boot provides grip and protects the gauge body from minor impacts during use and storage.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does silicone-filled mean for a pressure gauge?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eA silicone-filled gauge contains silicone fluid inside the housing that dampens needle movement and reduces vibration-related wear on internal components. The fill also helps prevent moisture from condensing on the inside of the lens, keeping the pressure reading legible in cold or humid field conditions. This construction is standard in gauges used in demanding outdoor and off-road environments.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow is this gauge installed?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank 3000 PSI replacement gauge threads directly into the top gauge port of a Power Tank Super Flow regulator using its 1\/8\" NPT threads. A wrench sized for the gauge fitting is all that is needed; no special tools or adapters are required. Always depressurize the regulator fully before removing the original gauge.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621640441926,"sku":"GAU-0427","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/XP400.jpg?v=1791935406"},{"product_id":"power-tank-400-psi-super-flow-regulator-replacement-front-gauge","title":"Power Tank 400 psi Super Flow Regulator Replacement Front Gauge","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank 400 psi Replacement Front Gauge is a direct-fit service part for any Power Tank Super Flow regulator, restoring accurate tank pressure readings after a gauge breaks or fails. The silicone-filled, 1.5-inch dial threads in via standard 1\/8\" NPT and is sold individually as a single front gauge.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to Match the Original\u003c\/h2\u003e\n\u003cp\u003eThe replacement gauge is silicone filled, which dampens needle flutter caused by pressure surges and protects the internal mechanism from moisture. That is the same construction used in the original Super Flow regulator gauges. At 1.5 inches in diameter, the dial is large enough to read clearly while working at the tank, and the 1\/8\" NPT thread is the industry-standard fitting used across Power Tank's Super Flow regulator line regardless of when the regulator was made.\u003c\/p\u003e\n\n\u003ch2\u003eFits Any Super Flow Regulator, Any Age\u003c\/h2\u003e\n\u003cp\u003ePower Tank designed this gauge as a universal direct-fit replacement across the entire Super Flow regulator family. No production-year matching or model-suffix matching is required. If the regulator is a Power Tank Super Flow, this gauge fits. That compatibility span means a single spare can cover multiple regulators in a fleet or shop without stocking separate part numbers.\u003c\/p\u003e\n\n\u003ch2\u003eRubber Boot Availability\u003c\/h2\u003e\n\u003cp\u003eA rubber boot is included on this gauge as stock allows. Boots will not be restocked once current inventory is exhausted, so future orders may ship without a boot. The gauge itself is fully functional without the boot; the boot provides impact protection for the dial housing only.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e400 psi range:\u003c\/strong\u003e matches the pressure scale of Power Tank Super Flow regulators\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSilicone filled:\u003c\/strong\u003e dampens needle movement and resists moisture intrusion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.5 in. diameter dial:\u003c\/strong\u003e readable at arm's length while working at the tank\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1\/8\" NPT threads:\u003c\/strong\u003e standard fitting for direct installation into the regulator body\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRubber boot:\u003c\/strong\u003e included as stock allows; boots are not being restocked\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eGauge Type\u003c\/td\u003e\n      \u003ctd\u003eFront (tank pressure)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePressure Range\u003c\/td\u003e\n      \u003ctd\u003e400 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDial Diameter\u003c\/td\u003e\n      \u003ctd\u003e1.5 in.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThread Size\u003c\/td\u003e\n      \u003ctd\u003e1\/8\" NPT\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFill Type\u003c\/td\u003e\n      \u003ctd\u003eSilicone filled\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRubber Boot\u003c\/td\u003e\n      \u003ctd\u003eIncluded as stock allows; not being restocked\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.5 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatibility\u003c\/td\u003e\n      \u003ctd\u003eAny Power Tank Super Flow regulator, all ages\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eGAU-0426\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis gauge suits any Power Tank Super Flow regulator owner who needs to replace a cracked, broken, or inaccurate front gauge. It is the correct service part whether the regulator is a recent purchase or a years-old unit, and it works across the full Super Flow line without fitment matching.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis gauge fits Power Tank Super Flow regulators only. It is a front (tank pressure) gauge only and does not replace a downstream or outlet gauge. A rubber boot is not guaranteed to be included.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Power Tank regulators does this gauge fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 400 psi replacement front gauge is a direct fit for any Power Tank Super Flow regulator regardless of the year it was made. No model-year matching is required. If the regulator is a Power Tank Super Flow, this gauge installs directly into the front gauge port.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does \"silicone filled\" mean and why does it matter?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eA silicone-filled gauge has its internal chamber filled with silicone fluid rather than left air-filled. The fluid dampens needle movement caused by pressure spikes, making the reading steadier, and it also protects the internal mechanism from condensation and moisture that can corrode a dry gauge over time.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill a rubber boot be included with my gauge?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eA rubber boot is included on the 400 psi replacement front gauge as stock allows. Boots will not be restocked once current supply is gone, so orders placed after boot inventory is exhausted will ship without one. The gauge operates normally without the boot.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat tools are needed to install this gauge?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe replacement front gauge uses a standard 1\/8\" NPT thread, which is a tapered pipe thread. Installation requires a wrench sized to the gauge hex fitting and thread sealant appropriate for gas service. No torque value is specified in the product data, so follow the regulator's service documentation for final installation guidance.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs this a front gauge or an outlet gauge?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThis is the front gauge, which reads the pressure remaining in the CO2 tank. It is not an outlet or downstream gauge. If the outlet gauge on a Super Flow regulator needs replacement, a different service part is required.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621641490502,"sku":"GAU-0426","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/GAU-0422.jpg?v=1791935470"},{"product_id":"power-tank-10-lb-track-pack-co2-tire-inflation-system","title":"Power Tank 10 lb Track Pack CO2 Tire Inflation System","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank 10 lb Track Pack is a complete CO2 tire inflation system built for off-road and overlanding use, combining a 10 lb aluminum CO2 tank with a Super Flow regulator, Super Flex hose, Super Coupler, Power Grip Guard handle, Super Bracket, and a choice of five Ventoso tire inflator gauges. The system can air up four tires in under five minutes including setup and put away, and carries enough CO2 to inflate approximately 18 tires of 35-inch diameter by 15 psi on a single fill. It is available in Gloss Black, Candy Blue, and Candy Red.\u003c\/p\u003e\n\u003cp class=\"product-shipping-note\"\u003e\u003cstrong\u003eShips empty:\u003c\/strong\u003e CO2 tanks cannot be shipped filled, so the CO2 bottle in this package arrives empty. Have it filled with liquid CO2 at a local refill source (fire extinguisher service, welding gas supplier, beverage carbonics shop or paintball store) before first use.\u003c\/p\u003e\n\n\u003ch2\u003eSpeed Without a Cooldown Cycle\u003c\/h2\u003e\n\u003cp\u003eA CO2 system delivers pressure instantly from a stored liquid source, with no motor to spin up and no duty cycle to respect. The 10 lb Power Tank airs up a 35x12.50x17-inch tire by 15 psi in 38 seconds, a pace no portable compressor can match. On a trail where time and daylight matter, that difference is the gap between a quick airing-up stop and a long, frustrating wait at the side of the track.\u003c\/p\u003e\n\n\u003ch2\u003eEnough Output to Run Air Tools\u003c\/h2\u003e\n\u003cp\u003eThe Super Flow regulator is built for both high flow and high pressure, and the Super Coupler accepts any air tool plug style and connects or disconnects at 0 psi regardless of hose pressure. The same system that airs up tires can run an impact wrench to remove lug nuts, power air lockers, blow out air filters, or reseat a tire bead, all without a separate compressor or a 4-way air squid. The Super Flex hose is rated to 400 psi working pressure and 1,200 psi burst pressure, is built for CO2, and will not shatter when cold.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to Last Without Electronics to Fail\u003c\/h2\u003e\n\u003cp\u003eThe 10 lb CO2 tank is aluminum with an Armorcoat finish and a nickel-plated valve, backed by a limited lifetime warranty that covers recertification: if the bottle fails its required 5-year recertification test, Power Tank replaces it. The Power Grip Guard handle is machined from 6061 aluminum to protect the valve and regulator from trail impacts. The Super Flow regulator is fully rebuildable and carries its own limited lifetime warranty. With no moving parts and no electronics in the pressure delivery path, there is nothing to overheat, seize, or drain a battery.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e10 lb Armorcoat CO2 Tank:\u003c\/strong\u003e aluminum construction with nickel-plated valve; 24-inch height with handle, 6.9-inch diameter; empty weight approximately 17 lbs, full weight approximately 27 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuper Flow Regulator:\u003c\/strong\u003e adjustable, high-flow, high-pressure; never-freeze-clog design; fully rebuildable; limited lifetime warranty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuper Flex Hose:\u003c\/strong\u003e CO2-rated; 400 psi working pressure, 1,200 psi burst pressure; swivel fittings at both ends; cold-weather resistant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuper Coupler:\u003c\/strong\u003e connects and disconnects at 0 psi; accepts any air tool plug style; compact aluminum construction; rebuildable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Grip Guard Handle:\u003c\/strong\u003e machined 6061 aluminum; protects valve and regulator from impacts; limited lifetime warranty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChoice of Five Tire Inflator Gauges:\u003c\/strong\u003e Trooper (0–60 psi analog), Rubicon (1.5–60 psi digital), Long-Haul (0–150 psi analog), Work Horse (5–150 psi digital), or Racer Series (0–100 psi precision digital)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTank Capacity\u003c\/td\u003e\n      \u003ctd\u003e10 lb CO2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTank Material\u003c\/td\u003e\n      \u003ctd\u003eAluminum with Armorcoat finish, nickel-plated valve\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHeight (with handle)\u003c\/td\u003e\n      \u003ctd\u003e24 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBottle Diameter\u003c\/td\u003e\n      \u003ctd\u003e6.9 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEmpty Weight\u003c\/td\u003e\n      \u003ctd\u003e~17 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFull Weight\u003c\/td\u003e\n      \u003ctd\u003e~27 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUsable Energy Equivalent\u003c\/td\u003e\n      \u003ctd\u003e400 gal @ 150 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose Working Pressure\u003c\/td\u003e\n      \u003ctd\u003e400 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose Burst Pressure\u003c\/td\u003e\n      \u003ctd\u003e1,200 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHandle Material\u003c\/td\u003e\n      \u003ctd\u003e6061 aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eGauge Options\u003c\/td\u003e\n      \u003ctd\u003eTrooper 0–60 psi analog; Rubicon 1.5–60 psi digital; Long-Haul 0–150 psi analog; Work Horse 5–150 psi digital; Racer Series 0–100 psi precision digital\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColors\u003c\/td\u003e\n      \u003ctd\u003eGloss Black, Candy Blue, Candy Red\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecertification Interval\u003c\/td\u003e\n      \u003ctd\u003eEvery 5 years (required by US regulation for all gas cylinders)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWarranty\u003c\/td\u003e\n      \u003ctd\u003eLimited lifetime (tank, regulator, handle); bottle recertification guaranteed for life of bottle\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe 10 lb Power Tank Track Pack suits overlanders, trail runners, and off-road enthusiasts who air down for the trail and need to air up quickly at the end of the day, particularly those running 35-inch or larger tires where a portable compressor's speed and duty cycle are a genuine limitation. It also works for anyone who needs trail-side air tool capability without carrying a separate compressor.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe 10 lb Power Tank requires refilling with liquid CO2 at a local CO2 refill business (fire extinguisher service, beverage carbonics, welding gas provider, hydroponics shop, or specialty aquarium store); it is not a self-contained rechargeable system, and buyers should confirm a refill location in their area before purchase. The tank must also be recertified every five years as required by US regulation for all gas cylinders; Power Tank guarantees the bottle will pass recertification for the life of the bottle or replaces it, but recertification itself is the owner's responsibility to arrange locally. Physical damage to the cylinder after delivery is not covered under the bottle warranty.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhere do I get the 10 lb Power Tank refilled?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 10 lb Power Tank CO2 system must be refilled with liquid CO2 at a local CO2 refill business. Common refill locations include fire extinguisher service companies, beverage carbonics companies, welding gas providers, hydroponics shops, and specialty aquarium stores. Confirming a local refill location before purchase is recommended.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow many tires can the 10 lb tank inflate on one fill?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eOn a single fill, the 10 lb Power Tank can air up approximately 18 tires of 35-inch diameter by 15 psi, enough for four full trail trips with CO2 remaining for bead seating or blowing out dust. Actual fill counts vary with tire size and the amount of pressure being added; Power Tank publishes a full air-up chart and an online tire fill calculator for specific tire dimensions.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the 10 lb Power Tank run air tools, or is it only for tire inflation?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 10 lb Power Tank CO2 system can run air tools including impact wrenches, air lockers, and blow guns in addition to inflating tires and reseating beads. The Super Coupler accepts any standard air tool plug style and connects or disconnects at 0 psi, so switching between tools requires no pressure bleed-down.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between the five tire inflator gauge options?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe five gauge options differ in pressure range and display type. The Trooper (0–60 psi, analog) and Rubicon (1.5–60 psi, digital) are sized for standard passenger and light truck tire pressures. The Long-Haul (0–150 psi, analog) and Work Horse (5–150 psi, digital) cover higher-pressure applications. The Racer Series (0–100 psi, precision digital) is designed for applications where fine pressure resolution matters.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the 10 lb CO2 tank need to be recertified, and what does Power Tank's warranty cover?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eUS regulations require all gas cylinders to be recertified every five years or at the time of the next fill. Power Tank guarantees the 10 lb CO2 bottle will pass its recertification test for the life of the bottle; if it fails, Power Tank replaces it. Recertification is completed locally. Physical damage to the cylinder occurring after delivery is not covered under this guarantee.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Gloss Black \/ Trooper - 0-60 Analog","offer_id":50621644406854,"sku":"PT10-TBKLA1C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Rubicon - 1.5-60 Digital","offer_id":50621644439622,"sku":"PT10-TBKLD1C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Long-Haul - 0-150 Analog","offer_id":50621644472390,"sku":"PT10-TBKHA1C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Work Horse - 5-150 Digital","offer_id":50621644505158,"sku":"PT10-TBKHD1C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Racer Series - 0-100 Precision Digital","offer_id":50621644537926,"sku":"PT10-TBKRS1C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Trooper - 0-60 Analog","offer_id":50621644570694,"sku":"PT10-TCBLA1C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Rubicon - 1.5-60 Digital","offer_id":50621644603462,"sku":"PT10-TCBLD1C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Long-Haul - 0-150 Analog","offer_id":50621644636230,"sku":"PT10-TCBHA1C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Work Horse - 5-150 Digital","offer_id":50621644668998,"sku":"PT10-TCBHD1C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Racer Series - 0-100 Precision Digital","offer_id":50621644701766,"sku":"PT10-TCBRS1C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Trooper - 0-60 Analog","offer_id":50621644734534,"sku":"PT10-TCRLA1C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Rubicon - 1.5-60 Digital","offer_id":50621644767302,"sku":"PT10-TCRLD1C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Long-Haul - 0-150 Analog","offer_id":50621644800070,"sku":"PT10-TCRHA1C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Work Horse - 5-150 Digital","offer_id":50621644832838,"sku":"PT10-TCRHD1C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Racer Series - 0-100 Precision Digital","offer_id":50621644865606,"sku":"PT10-TCRRS1C","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/Power_Tank_Repairs_12-sq.jpg?v=1791935590"},{"product_id":"power-tank-15-lb-track-pack-co2-tire-inflation-system","title":"Power Tank 15 lb Track Pack CO2 Tire Inflation System","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank 15 lb Track Pack is a portable CO2 tire inflation system built for off-road and overlanding use, delivering enough stored energy to fill up to 27 tires at 35 inches when adding 15 psi per fill. The system arrives ready to use with a Super Flow regulator, Super Flex hose, Super Coupler, Super Bracket, and Carbon Regulator Cover included. Available in Gloss Black or Candy Red, with five Ventoso tire inflator gauge configurations to match the buyer's preferred pressure range.\u003c\/p\u003e\n\u003cp class=\"product-shipping-note\"\u003e\u003cstrong\u003eShips empty:\u003c\/strong\u003e CO2 tanks cannot be shipped filled, so the CO2 bottle in this package arrives empty. Have it filled with liquid CO2 at a local refill source (fire extinguisher service, welding gas supplier, beverage carbonics shop or paintball store) before first use.\u003c\/p\u003e\n\n\u003ch2\u003eNo Moving Parts, No Cooldown\u003c\/h2\u003e\n\u003cp\u003eCO2 systems deliver air on demand without a motor, compressor pump, or battery. Because there are no moving parts and no electronics, the Power Tank 15 lb system performs the same on the first fill of the day as on the last, with no waiting for a motor to cool between tires. On the trail, that consistency matters: a stuck bead or a flat at the end of a run gets the same fast response as the first airing-up of the morning.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to Handle Trail Conditions\u003c\/h2\u003e\n\u003cp\u003eThe Super Flow adjustable regulator is designed to resist freeze-clogging, a common failure point for CO2 regulators in cold or high-flow situations. It is fully rebuildable and backed by a limited lifetime warranty. The Super Flex hose is rated to 400 psi working pressure and 1,200 psi burst pressure, with high-quality swivels at both ends and a construction that stays flexible rather than shattering in cold temperatures.\u003c\/p\u003e\n\u003cp\u003eThe Power Grip Guard handle is machined from 6061 aluminum and wraps the valve and regulator to protect them from impacts during transport and trail use. The Armorcoat aluminum bottle carries a nickel-plated valve and a durable finish. If the bottle fails its required five-year recertification, Power Tank replaces it. Failures from physical damage after delivery are not covered.\u003c\/p\u003e\n\n\u003ch2\u003eConnect and Disconnect Under Pressure\u003c\/h2\u003e\n\u003cp\u003eThe Super Coupler allows tool connection and disconnection at 0 psi regardless of the pressure in the hose, so swapping between a tire chuck and an impact wrench does not require bleeding the line first. The coupler accepts any standard air tool plug style and is built from compact aluminum with a rebuildable design. The Super Bracket mounts the system to a vehicle when paired with a compatible vehicle mount, which is sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuper Flow Regulator:\u003c\/strong\u003e Adjustable, freeze-clog resistant, fully rebuildable, limited lifetime warranty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuper Flex Hose:\u003c\/strong\u003e 400 psi WP, 1,200 psi burst, cold-weather flexible, swivels at both ends\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuper Coupler:\u003c\/strong\u003e Connects and disconnects at 0 psi, accepts any air tool plug style, rebuildable aluminum construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Grip Guard Handle:\u003c\/strong\u003e Machined 6061 aluminum, protects valve and regulator from impact\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArmorcoat Bottle:\u003c\/strong\u003e Aluminum construction with nickel-plated valve and durable finish coating\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCarbon Regulator Cover:\u003c\/strong\u003e Included to protect the regulator during storage and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCO2 Capacity\u003c\/td\u003e\n      \u003ctd\u003e15 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUsable Energy Equivalent\u003c\/td\u003e\n      \u003ctd\u003e600 gal at 150 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHeight (with handle)\u003c\/td\u003e\n      \u003ctd\u003e30 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBottle Diameter\u003c\/td\u003e\n      \u003ctd\u003e6.9 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEmpty Weight\u003c\/td\u003e\n      \u003ctd\u003e~21 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFull Weight\u003c\/td\u003e\n      \u003ctd\u003e~36 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHandle Material\u003c\/td\u003e\n      \u003ctd\u003e6061 aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBottle Material\u003c\/td\u003e\n      \u003ctd\u003eAluminum with nickel-plated valve\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose Working Pressure\u003c\/td\u003e\n      \u003ctd\u003e400 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose Burst Pressure\u003c\/td\u003e\n      \u003ctd\u003e1,200 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAvailable Colors\u003c\/td\u003e\n      \u003ctd\u003eGloss Black, Candy Red\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eGauge Options\u003c\/td\u003e\n      \u003ctd\u003eTrooper 0–60 Analog; Rubicon 1.5–60 Digital; Long-Haul 0–150 Analog; Work Horse 5–150 Digital; Racer Series 0–100 Precision Digital\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded\u003c\/td\u003e\n      \u003ctd\u003e15 lb CO2 bottle, Super Flow regulator, Super Flex hose, Super Coupler, Super Bracket, Carbon Regulator Cover, selected tire inflator gauge\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecertification Interval\u003c\/td\u003e\n      \u003ctd\u003eEvery 5 years or at next fill (US federal requirement for all gas cylinders)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Power Tank 15 lb Track Pack suits off-road drivers, overlanders, and trail-day participants who air down tires for terrain and need a fast, reliable way to air back up without relying on a compressor or external power source. The 15 lb capacity is well matched to rigs running 35-inch or larger tires across multiple fill cycles per outing, and the included Super Coupler makes the system usable with impact wrenches and other air tools on the trail.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe 15 lb Track Pack does not include a vehicle-specific mount. The Super Bracket requires a separately purchased vehicle mount to secure the system in a rig. The tank requires periodic refilling with liquid CO2; fire extinguisher service companies, beverage carbonics suppliers, welding gas suppliers, hydroponics stores, and specialty aquarium shops are common refill sources, and confirming one is accessible locally before purchasing is recommended. The system is not a self-contained electric compressor and does not recharge from a vehicle's electrical system.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow many tires can the 15 lb Power Tank fill per CO2 charge?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eBased on Power Tank's published fill chart, the 15 lb system can inflate approximately 27 tires sized 35x12.50-17 when adding 15 psi per tire. Fill counts vary with tire size and the amount of pressure being added: larger tires or higher pressure additions reduce the count, while smaller tires or smaller pressure additions increase it. Power Tank's tire fill calculator accepts specific tire dimensions for a more precise estimate.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the Track Pack?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 15 lb Power Tank Track Pack includes the 15 lb Armorcoat CO2 bottle, Super Flow adjustable regulator, Super Flex hose, Super Coupler, Super Bracket, Carbon Regulator Cover, and the buyer's selected tire inflator gauge. A vehicle-specific mount for securing the Super Bracket to a rig is not included and is sold separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhere does the CO2 tank get refilled?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 15 lb Power Tank bottle requires refilling with liquid CO2. Fire extinguisher service companies, beverage carbonics suppliers, welding gas suppliers, hydroponics stores, and specialty aquarium shops are common refill sources. All gas cylinders in the US must be recertified every five years or at the next fill; local CO2 refill businesses typically handle recertification.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the regulator freeze up during use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Super Flow regulator included with the 15 lb Track Pack is designed to resist freeze-clogging, which can occur in CO2 regulators during high-flow or cold-weather use. The regulator is fully rebuildable, so components can be serviced rather than replaced as a unit if needed.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the 15 lb Power Tank run air tools like an impact wrench?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 15 lb Power Tank system can power air tools including impact wrenches. The Super Coupler accepts any standard air tool plug style and connects or disconnects at 0 psi without bleeding the hose, making tool swaps straightforward on the trail. Power Tank's published chart shows the 15 lb system capable of removing approximately 540 lug nuts torqued to 90 ft-lbs using a 1\/2-inch impact wrench.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Gloss Black \/ Trooper - 0-60 Analog","offer_id":50621645750342,"sku":"PT15-TBKLA1C","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Rubicon - 1.5-60 Digital","offer_id":50621645783110,"sku":"PT15-TBKLD1C","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Long-Haul - 0-150 Analog","offer_id":50621645815878,"sku":"PT15-TBKHA1C","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Work Horse - 5-150 Digital","offer_id":50621645848646,"sku":"PT15-TBKHD1C","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Racer Series - 0-100 Precision Digital","offer_id":50621645881414,"sku":"PT15-TBKRS1C","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Trooper - 0-60 Analog","offer_id":50621645914182,"sku":"PT15-TCRLA1C","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Rubicon - 1.5-60 Digital","offer_id":50621645946950,"sku":"PT15-TCRLD1C","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Long-Haul - 0-150 Analog","offer_id":50621645979718,"sku":"PT15-TCRHA1C","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Work Horse - 5-150 Digital","offer_id":50621646012486,"sku":"PT15-TCRHD1C","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Racer Series - 0-100 Precision Digital","offer_id":50621646045254,"sku":"PT15-TCRRS1C","price":879.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/TP15-5350-B_v4.jpg?v=1791935643"},{"product_id":"power-tank-15-lb-dual-bottle-co2-tire-inflation-system","title":"Power Tank 15 lb Dual Bottle CO2 Tire Inflation System","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank 15 lb Dual Bottle is a dual-cylinder CO2 portable air system built for off-road and overlanding use, capable of airing up a 35x12.50-17 tire by 15 psi in approximately 38 seconds with no compressor, no cooldown period, and no external power source required. The system is configured at purchase with a choice of Gloss Black or Candy Red finish, one of five tire inflator gauges, and either a 30-foot coiled or 30-foot straight Super Flex hose.\u003c\/p\u003e\n\u003cp class=\"product-shipping-note\"\u003e\u003cstrong\u003eShips empty:\u003c\/strong\u003e CO2 tanks cannot be shipped filled, so the CO2 bottle in this package arrives empty. Have it filled with liquid CO2 at a local refill source (fire extinguisher service, welding gas supplier, beverage carbonics shop or paintball store) before first use.\u003c\/p\u003e\n\n\u003ch2\u003eSpeed Without a Compressor\u003c\/h2\u003e\n\u003cp\u003eCO2 delivers airflow on demand the moment the regulator opens, which means there is no warm-up cycle, no duty cycle to respect, and no waiting for a motor to recover between tires. On the trail, that translates to airing up four tires and stowing the system in under five minutes. That margin matters when weather is moving in or the group is waiting at the next waypoint. The 15 lb dual-bottle configuration stores enough CO2 to air up 54 35-inch tires, providing capacity for multiple trips before a refill is needed.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to Run Air Tools, Not Just Tires\u003c\/h2\u003e\n\u003cp\u003eThe Super Flow adjustable regulator is engineered for both high flow and high pressure, and is designed to resist freeze-clogging, a failure mode that affects many CO2 regulators during sustained use. That high-flow output is enough to run a 1\/2-inch impact wrench at full power, reseat a tire bead, blow out air filters, and operate air lockers. The Super Coupler accepts any air tool plug style and connects or disconnects at 0 psi regardless of hose pressure, so swapping tools mid-task does not require shutting down the system.\u003c\/p\u003e\n\n\u003ch2\u003eHardware Built for Long-Term Use\u003c\/h2\u003e\n\u003cp\u003eThe Power Grip Guard handle is machined from 6061 aluminum to protect the valve and regulator from trail impacts. The Armorcoat aluminum bottle carries a nickel-plated valve and a durable finish. The Super Flex hose is rated to 400 psi working pressure and 1,200 psi burst pressure, uses high-quality swivels at both ends, and is formulated not to shatter when cold. The Super Flow regulator and the Super Coupler are both fully rebuildable. A Carbon Regulator Cover is included to protect the regulator during storage and transport. All Power Tank bottles are backed by a guarantee to pass their five-year recertification test for the life of the bottle; if a bottle fails recertification, it is replaced at no charge (physical damage after delivery is excluded).\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual 15 lb CO2 bottles:\u003c\/strong\u003e 600 gal useable energy equivalent at 150 psi per bottle; dual configuration doubles available capacity\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuper Flow Regulator:\u003c\/strong\u003e Adjustable, high-flow, freeze-clog resistant, fully rebuildable, limited lifetime warranty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuper Flex Hose:\u003c\/strong\u003e 400 psi WP \/ 1,200 psi burst, cold-resistant, swivel fittings at both ends; available in 30 ft coiled or 30 ft straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuper Coupler:\u003c\/strong\u003e Connects and disconnects at 0 psi, accepts any air tool plug style, compact aluminum construction, rebuildable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Grip Guard Handle:\u003c\/strong\u003e Machined 6061 aluminum, protects valve and regulator from impacts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCarbon Regulator Cover:\u003c\/strong\u003e Included to protect the regulator during storage and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTank size\u003c\/td\u003e\n      \u003ctd\u003e15 lb CO2 (dual bottle)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUseable energy equivalent (per bottle)\u003c\/td\u003e\n      \u003ctd\u003e600 gal @ 150 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHeight with handle\u003c\/td\u003e\n      \u003ctd\u003e30 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBottle diameter\u003c\/td\u003e\n      \u003ctd\u003e6.9 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEmpty weight (per bottle)\u003c\/td\u003e\n      \u003ctd\u003e~21 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFull weight (per bottle)\u003c\/td\u003e\n      \u003ctd\u003e~36 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHandle material\u003c\/td\u003e\n      \u003ctd\u003e6061 aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBottle material\u003c\/td\u003e\n      \u003ctd\u003eAluminum with nickel-plated valve, Armorcoat finish\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose working pressure\u003c\/td\u003e\n      \u003ctd\u003e400 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose burst pressure\u003c\/td\u003e\n      \u003ctd\u003e1,200 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose length \/ style options\u003c\/td\u003e\n      \u003ctd\u003e30 ft coiled or 30 ft straight\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eGauge options\u003c\/td\u003e\n      \u003ctd\u003eTrooper 0–60 Analog; Rubicon 1.5–60 Digital; Long-Haul 0–150 Analog; Work Horse 5–150 Digital; Racer Series 0–100 Precision Digital\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColor options\u003c\/td\u003e\n      \u003ctd\u003eGloss Black, Candy Red\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecertification interval\u003c\/td\u003e\n      \u003ctd\u003eEvery 5 years (required by US regulation for all gas cylinders)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRefill medium\u003c\/td\u003e\n      \u003ctd\u003eLiquid CO2; refill locations include fire extinguisher service shops, beverage carbonics, welding gas supply, hydroponics, and specialty aquarium businesses\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Power Tank 15 lb Dual Bottle suits overlanders, off-road drivers, and trail users who air down for technical terrain and need to air back up quickly across multiple vehicles or multiple trips without waiting on a compressor. The dual-bottle configuration is particularly well suited to group runs, guided trips, or anyone who wants extended capacity between refills.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Power Tank 15 lb Dual Bottle requires liquid CO2 refills and cannot be recharged at home or refilled from a standard air compressor or a consumer CO2 cartridge. Buyers should confirm access to a liquid CO2 refill location before purchasing. Physical damage to the cylinder after delivery is not covered under the bottle replacement guarantee.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhere do I get the CO2 refilled?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank 15 lb Dual Bottle requires liquid CO2 for refills. Refill locations include fire extinguisher service shops, beverage carbonics businesses, welding gas supply shops, hydroponics stores, and specialty aquarium businesses. Power Tank provides a CO2 refiller map on their website to help locate a nearby station before purchase.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow many tires can the 15 lb dual-bottle system fill?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank 15 lb system is rated to air up 54 35-inch tires on the page for this product. Actual fill counts vary by tire size and how much pressure is being added.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich gauge option should I choose?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe five gauge options cover different pressure ranges and readout styles: the Trooper (0–60 analog) and Rubicon (1.5–60 digital) are sized for typical off-road tire pressures; the Long-Haul (0–150 analog) and Work Horse (5–150 digital) cover higher-pressure applications including air tools; the Racer Series (0–100 precision digital) is designed for applications where fine pressure resolution matters. Choose based on the pressure range and readout format that matches your primary use.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between the coiled and straight hose options?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eBoth the 30-foot coiled and 30-foot straight Super Flex hose options share the same 400 psi working pressure, 1,200 psi burst pressure rating, and swivel fittings at both ends. The coiled hose retracts for compact storage and reduces slack management on the trail; the straight hose offers a consistent reach without the spring tension of a coil.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Power Tank 15 lb Dual Bottle require a battery or external power source?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank 15 lb Dual Bottle operates entirely on compressed CO2 with no moving parts and no electronics. It does not require a battery, a vehicle connection, or an external power source, making it functional even when a vehicle's electrical system is unavailable.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Gloss Black \/ Trooper - 0-60 Analog \/ 30 ft Coiled","offer_id":50621651615814,"sku":"PT15-CBKLA3C","price":1179.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Trooper - 0-60 Analog \/ 30 ft Straight","offer_id":50621651648582,"sku":"PT15-CBKLA3S","price":1179.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Rubicon - 1.5-60 Digital \/ 30 ft Coiled","offer_id":50621651681350,"sku":"PT15-CBKLD3C","price":1179.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Rubicon - 1.5-60 Digital \/ 30 ft Straight","offer_id":50621651714118,"sku":"PT15-CBKLD3S","price":1179.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Long-Haul - 0-150 Analog \/ 30 ft Coiled","offer_id":50621651746886,"sku":"PT15-CBKHA3C","price":1179.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Long-Haul - 0-150 Analog \/ 30 ft Straight","offer_id":50621651779654,"sku":"PT15-CBKHA3S","price":1179.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Work Horse - 5-150 Digital \/ 30 ft Coiled","offer_id":50621651812422,"sku":"PT15-CBKHD3C","price":1179.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Work Horse - 5-150 Digital \/ 30 ft Straight","offer_id":50621651845190,"sku":"PT15-CBKHD3S","price":1179.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Racer Series - 0-100 Precision Digital \/ 30 ft Coiled","offer_id":50621651877958,"sku":"PT15-CBKRS3C","price":1179.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Racer Series - 0-100 Precision Digital \/ 30 ft Straight","offer_id":50621651910726,"sku":"PT15-CBKRS3S","price":1179.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Trooper - 0-60 Analog \/ 30 ft Coiled","offer_id":50621651943494,"sku":"PT15-CCRLA3C","price":1179.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Trooper - 0-60 Analog \/ 30 ft Straight","offer_id":50621651976262,"sku":"PT15-CCRLA3S","price":1179.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Rubicon - 1.5-60 Digital \/ 30 ft Coiled","offer_id":50621652009030,"sku":"PT15-CCRLD3C","price":1179.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Rubicon - 1.5-60 Digital \/ 30 ft Straight","offer_id":50621652041798,"sku":"PT15-CCRLD3S","price":1179.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Long-Haul - 0-150 Analog \/ 30 ft Coiled","offer_id":50621652074566,"sku":"PT15-CCRHA3C","price":1179.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Long-Haul - 0-150 Analog \/ 30 ft Straight","offer_id":50621652107334,"sku":"PT15-CCRHA3S","price":1179.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Work Horse - 5-150 Digital \/ 30 ft Coiled","offer_id":50621652140102,"sku":"PT15-CCRHD3C","price":1179.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Work Horse - 5-150 Digital \/ 30 ft Straight","offer_id":50621652172870,"sku":"PT15-CCRHD3S","price":1179.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Racer Series - 0-100 Precision Digital \/ 30 ft Coiled","offer_id":50621652205638,"sku":"PT15-CCRRS3C","price":1179.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Racer Series - 0-100 Precision Digital \/ 30 ft Straight","offer_id":50621652238406,"sku":"PT15-CCRRS3S","price":1179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/PT15-5380-B_v4.jpg?v=1791935776"},{"product_id":"power-tank-15-lb-single-bottle-co2-air-system","title":"Power Tank 15 lb Single Bottle CO2 Air System","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank 15 lb Single Bottle is a self-contained CO2 air system built for off-road vehicles, delivering 600 gallons of usable air at 150 psi from a single 15 lb aluminum bottle. With no moving parts and no electronics, the system airs up a 35x12.50x17-inch tire by 15 psi in 38 seconds and can reseat beads, run air tools, and power air lockers without an external power source or compressor. Available in Gloss Black or Candy Red, with five tire inflator gauge options and a choice of 30 ft coiled or straight hose.\u003c\/p\u003e\n\u003cp class=\"product-shipping-note\"\u003e\u003cstrong\u003eShips empty:\u003c\/strong\u003e CO2 tanks cannot be shipped filled, so the CO2 bottle in this package arrives empty. Have it filled with liquid CO2 at a local refill source (fire extinguisher service, welding gas supplier, beverage carbonics shop or paintball store) before first use.\u003c\/p\u003e\n\n\u003ch2\u003eFill Speed Without a Compressor\u003c\/h2\u003e\n\u003cp\u003eThe 15 lb Power Tank airs up four tires in under five minutes, including setup and put-away. CO2 delivers pressure instantly with no motor to spin up and no duty cycle to respect, so the system gets a wheeling group back on the road before a compressor has finished its first tire. At 38 seconds per 35x12.50x17-inch tire (adding 15 psi), the pace is consistent regardless of how many tires have already been filled. The Super Flow adjustable regulator is engineered for both high flow and high pressure and is designed to never freeze-clog, a common failure point on CO2 systems running at sustained output.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to Handle Trail Demands\u003c\/h2\u003e\n\u003cp\u003eThe Armorcoat bottle is aluminum with a nickel-plated valve and a durable finish, backed by a limited lifetime warranty that covers recertification failure. If the bottle fails its required 5-year recertification test, Power Tank replaces it. The Power Grip Guard handle is machined from 6061 aluminum to protect the valve and regulator from impact, not stamped or cast. The Super Flex hose is rated to 400 psi working pressure and 1,200 psi burst pressure, with high-quality swivels at both ends; the hose material does not shatter when cold, which matters on winter trail runs or high-altitude trips where standard rubber hoses become brittle.\u003c\/p\u003e\n\u003cp\u003eThe Super Coupler lets you connect and disconnect air tools at 0 psi regardless of the pressure remaining in the hose, and it accepts any standard air tool plug style. Both the regulator and the coupler are fully rebuildable. A Carbon Regulator Cover is included to protect the regulator between uses.\u003c\/p\u003e\n\n\u003ch2\u003eMore Than Tire Inflation\u003c\/h2\u003e\n\u003cp\u003eThe 15 lb Power Tank's 600-gallon usable energy reserve supports tasks well beyond airing up tires. Running a 1\/2-inch impact wrench (IR231), the system can remove or install approximately 540 lug nuts torqued to 90 ft-lbs on a single fill. The same bottle can drive a framing nailer, a finish nailer, or a coiled roofing nailer for hundreds to thousands of nails depending on nail size and material, making the system useful at a job site or a remote camp build, not just on the trail. The Super Bracket is included and is designed to pair with a separately sold vehicle mount for in-vehicle storage.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e600-gallon usable energy reserve:\u003c\/strong\u003e 600 gal at 150 psi from a single 15 lb CO2 fill\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuper Flow regulator:\u003c\/strong\u003e high-flow, high-pressure, freeze-clog resistant, fully rebuildable, limited lifetime warranty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArmorcoat aluminum bottle:\u003c\/strong\u003e nickel-plated valve, durable finish, limited lifetime warranty with recertification guarantee\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuper Flex hose:\u003c\/strong\u003e 400 psi WP \/ 1,200 psi burst, cold-resistant, swivels at both ends, 30 ft coiled or straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuper Coupler:\u003c\/strong\u003e 0-psi connect\/disconnect, accepts any air tool plug style, rebuildable aluminum construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFive gauge options:\u003c\/strong\u003e Trooper (0–60 analog), Rubicon (1.5–60 digital), Long-Haul (0–150 analog), Work Horse (5–150 digital), Racer Series (0–100 precision digital)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCO2 fill size\u003c\/td\u003e\n      \u003ctd\u003e15 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUsable energy equivalent\u003c\/td\u003e\n      \u003ctd\u003e600 gal @ 150 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHeight with handle\u003c\/td\u003e\n      \u003ctd\u003e30 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBottle diameter\u003c\/td\u003e\n      \u003ctd\u003e6.9 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEmpty weight\u003c\/td\u003e\n      \u003ctd\u003e~21 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFull weight\u003c\/td\u003e\n      \u003ctd\u003e~36 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBottle material\u003c\/td\u003e\n      \u003ctd\u003eAluminum, Armorcoat finish, nickel-plated valve\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHandle material\u003c\/td\u003e\n      \u003ctd\u003e6061 aluminum (machined)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose working pressure\u003c\/td\u003e\n      \u003ctd\u003e400 psi WP \/ 1,200 psi burst\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose length\u003c\/td\u003e\n      \u003ctd\u003e30 ft (coiled or straight)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eGauge options\u003c\/td\u003e\n      \u003ctd\u003eTrooper 0–60 analog · Rubicon 1.5–60 digital · Long-Haul 0–150 analog · Work Horse 5–150 digital · Racer Series 0–100 precision digital\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColors\u003c\/td\u003e\n      \u003ctd\u003eGloss Black, Candy Red\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded\u003c\/td\u003e\n      \u003ctd\u003e15 lb CO2 bottle, Super Flow regulator, Super Flex hose, Super Coupler, Super Bracket, Carbon Regulator Cover\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecertification interval\u003c\/td\u003e\n      \u003ctd\u003eEvery 5 years or at next fill (US requirement)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe 15 lb Power Tank suits off-road and overland drivers who air down for the trail and need to air back up quickly, reaching four tires in under five minutes, without carrying a compressor or relying on shore power. It also works for anyone who needs portable air tool capability (impact wrenches, nailers, air lockers) at remote sites where electricity is unavailable.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe 15 lb Power Tank requires access to a local liquid CO2 supplier for refills; confirming a nearby refill location before purchase is strongly advised. A vehicle mount bracket is not included and is sold separately. The system does not generate its own air and cannot be recharged from a wall outlet or solar panel.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow many 35-inch tires can the 15 lb Power Tank inflate?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003ePower Tank states the 15 lb system can air up approximately 27 tires in the 35-inch range on a single fill. The tire fill chart shows up to 31 tires of 35x12.50-17 size when adding 15 psi, with each tire taking about 38 seconds. Actual fill counts vary with starting pressure, tire volume, and ambient temperature.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhere does the 15 lb Power Tank get refilled?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 15 lb Power Tank is refilled with liquid CO2 at a local CO2 supplier: typically a fire extinguisher service, beverage carbonics shop, welding gas supplier, hydroponics store, or specialty aquarium retailer. Power Tank recommends confirming a nearby refill location before purchasing the system.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes the tank need to be recertified, and what does that involve?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eAll CO2 gas cylinders in the United States must be recertified every five years or at the time of the next fill. Power Tank guarantees that its bottles will pass recertification for the life of the bottle; if a bottle fails the test, Power Tank replaces it at no charge. Physical damage to the cylinder after delivery is not covered under this guarantee.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the 15 lb Power Tank run air tools, not just inflate tires?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 15 lb Power Tank can power a 1\/2-inch impact wrench, framing nailers, finish nailers, and coiled roofing nailers, among other air tools. Running a 1\/2-inch impact wrench to remove lug nuts torqued to 90 ft-lbs, the system supports approximately 540 lug nut operations on a single fill. The Super Coupler accepts any standard air tool plug style.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhich tire inflator gauge option is right for my use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 15 lb Power Tank is available with five gauge options: the Trooper (0–60 psi analog) and Rubicon (1.5–60 psi digital) suit standard off-road tire pressures; the Long-Haul (0–150 psi analog) and Work Horse (5–150 psi digital) cover higher-pressure applications including truck tires and air tools; and the Racer Series (0–100 psi precision digital) is designed for applications where fine pressure accuracy matters.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Gloss Black \/ Trooper - 0-60 Analog \/ 30 ft Coiled","offer_id":50621653254214,"sku":"PT15-BBKLA3C","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Trooper - 0-60 Analog \/ 30 ft Straight","offer_id":50621653286982,"sku":"PT15-BBKLA3S","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Rubicon - 1.5-60 Digital \/ 30 ft Coiled","offer_id":50621653319750,"sku":"PT15-BBKLD3C","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Rubicon - 1.5-60 Digital \/ 30 ft Straight","offer_id":50621653352518,"sku":"PT15-BBKLD3S","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Long-Haul - 0-150 Analog \/ 30 ft Coiled","offer_id":50621653385286,"sku":"PT15-BBKHA3C","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Long-Haul - 0-150 Analog \/ 30 ft Straight","offer_id":50621653418054,"sku":"PT15-BBKHA3S","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Work Horse - 5-150 Digital \/ 30 ft Coiled","offer_id":50621653450822,"sku":"PT15-BBKHD3C","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Work Horse - 5-150 Digital \/ 30 ft Straight","offer_id":50621653483590,"sku":"PT15-BBKHD3S","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Racer Series - 0-100 Precision Digital \/ 30 ft Coiled","offer_id":50621653516358,"sku":"PT15-BBKRS3C","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Racer Series - 0-100 Precision Digital \/ 30 ft Straight","offer_id":50621653549126,"sku":"PT15-BBKRS3S","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Trooper - 0-60 Analog \/ 30 ft Coiled","offer_id":50621653581894,"sku":"PT15-BCRLA3C","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Trooper - 0-60 Analog \/ 30 ft Straight","offer_id":50621653614662,"sku":"PT15-BCRLA3S","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Rubicon - 1.5-60 Digital \/ 30 ft Coiled","offer_id":50621653647430,"sku":"PT15-BCRLD3C","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Rubicon - 1.5-60 Digital \/ 30 ft Straight","offer_id":50621653680198,"sku":"PT15-BCRLD3S","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Long-Haul - 0-150 Analog \/ 30 ft Coiled","offer_id":50621653712966,"sku":"PT15-BCRHA3C","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Long-Haul - 0-150 Analog \/ 30 ft Straight","offer_id":50621653745734,"sku":"PT15-BCRHA3S","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Work Horse - 5-150 Digital \/ 30 ft Coiled","offer_id":50621653778502,"sku":"PT15-BCRHD3C","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Work Horse - 5-150 Digital \/ 30 ft Straight","offer_id":50621653811270,"sku":"PT15-BCRHD3S","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Racer Series - 0-100 Precision Digital \/ 30 ft Coiled","offer_id":50621653844038,"sku":"PT15-BCRRS3C","price":879.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Racer Series - 0-100 Precision Digital \/ 30 ft Straight","offer_id":50621653876806,"sku":"PT15-BCRRS3S","price":879.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/PT15-5350-B_v4.jpg?v=1791935850"},{"product_id":"power-tank-regulator-super-coupler","title":"Power Tank Regulator Super Coupler","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Regulator Super Coupler (ALA-8057) is an aluminum replacement coupler designed to install on the outlet of a Power Tank Super Flow regulator, upgrading it from a Power Flow coupler to a dual-lock Super Coupler with self-bleed safety. It is rebuildable and accepts multiple air tool plug styles on its outlet side.\u003c\/p\u003e\n\n\u003ch2\u003eSafer Hose Disconnection Under Pressure\u003c\/h2\u003e\n\u003cp\u003eA Power Flow coupler on a charged hose holds residual downstream pressure after the air supply is shut off, making the coupler difficult to release and leaving the hose free to whip when it finally disconnects. The Regulator Super Coupler's dual-lock design with self-bleed vents that downstream pressure before the coupler releases, so the hose separates cleanly and without stored energy driving it. For anyone working around a CO2 system at trail-side or in a shop, removing that whip hazard is a meaningful safety improvement over the standard coupler.\u003c\/p\u003e\n\n\u003ch2\u003eRebuildable Construction\u003c\/h2\u003e\n\u003cp\u003eThe Regulator Super Coupler is rebuildable, meaning worn seals or internal components can be replaced rather than discarding the entire coupler. On a CO2 system used regularly across multiple trips and tire changes, a rebuildable coupler holds its value over time and keeps the regulator outlet performing consistently without requiring a full regulator replacement when normal wear occurs.\u003c\/p\u003e\n\n\u003ch2\u003eUniversal Outlet Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe outlet side of the Regulator Super Coupler accepts multiple air tool plug styles, so the air tools, tire inflators, and hose fittings already in a user's kit are likely to connect without an additional adapter. The inlet side is specific to the Power Tank Super Flow regulator outlet, replacing the Power Flow coupler that ships with that regulator.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-lock with self-bleed:\u003c\/strong\u003e vents downstream pressure before the coupler releases, preventing charged-hose whip\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReplaces Power Flow coupler:\u003c\/strong\u003e installs directly on the outlet of a Power Tank Super Flow regulator\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRebuildable:\u003c\/strong\u003e internal components can be serviced rather than replacing the entire coupler\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal outlet:\u003c\/strong\u003e accepts multiple air tool plug styles\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAluminum construction:\u003c\/strong\u003e lightweight and corrosion-resistant\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatibility\u003c\/td\u003e\n      \u003ctd\u003ePower Tank Super Flow regulator outlet (replaces Power Flow coupler)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOutlet\u003c\/td\u003e\n      \u003ctd\u003eUniversal: fits multiple air tool plug styles\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eALA-8057\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Regulator Super Coupler suits Power Tank users who run a Super Flow regulator and want to replace its Power Flow coupler with a safer, self-bleeding dual-lock coupler, particularly those who disconnect hoses frequently at trail-side or in conditions where a whipping hose would be a hazard.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis coupler is designed specifically for the outlet of the Power Tank Super Flow regulator and is not stated to be compatible with other regulator brands or models. It does not include a regulator, hose, or any other system component.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the Regulator Super Coupler replace?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Regulator Super Coupler replaces the Power Flow coupler on the outlet of a Power Tank Super Flow regulator. It is an upgrade, not a repair part for a damaged coupler: the intent is to add dual-lock self-bleed safety to a regulator that shipped with a Power Flow coupler.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is self-bleed and why does it matter?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eSelf-bleed means the Regulator Super Coupler vents residual downstream pressure in the hose before the coupler fully releases. Without it, a charged hose can be difficult to disconnect from a Power Flow coupler, and the stored pressure can cause the hose end to whip when it finally separates, a hazard when working at trail-side or in close quarters.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat air tool plug styles does the Regulator Super Coupler accept?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003ePower Tank describes the Regulator Super Coupler's outlet as universal, fitting multiple air tool plug styles. Power Tank does not publish a specific list of plug-style designations (such as Industrial, ARO, or Milton); buyers with less common plug styles should confirm compatibility with Power Tank directly before purchasing.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the Regulator Super Coupler be serviced when it wears?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Regulator Super Coupler is rebuildable, meaning internal seals and components can be replaced when they wear rather than replacing the entire coupler. Power Tank offers rebuild kits for their Super Coupler line; availability of the specific rebuild kit for this coupler should be confirmed with Power Tank or TerrainVault at time of purchase.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621655547974,"sku":"ALA-8057","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/1T9A9613_Large_74fb7ecf-5a07-4ef7-b407-cc4f893bf551-sq.jpg?v=1791935961"},{"product_id":"power-tank-10-lb-single-bottle-co2-tire-inflation-system","title":"Power Tank 10 lb Single Bottle CO2 Tire Inflation System","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank 10 lb Single Bottle is a portable CO2 air system built for off-road and overlanding use. It airs up a 35x12.50x17-inch tire by 15 psi in 38 seconds and can fill up to 18 tires of that size on a single charge, with no compressor, no warmup period, and no cooldown required. The package is configurable with five tire inflator gauge options and a choice of 30 ft coiled or straight hose, available in Gloss Black, Candy Blue, or Candy Red.\u003c\/p\u003e\n\u003cp class=\"product-shipping-note\"\u003e\u003cstrong\u003eShips empty:\u003c\/strong\u003e CO2 tanks cannot be shipped filled, so the CO2 bottle in this package arrives empty. Have it filled with liquid CO2 at a local refill source (fire extinguisher service, welding gas supplier, beverage carbonics shop or paintball store) before first use.\u003c\/p\u003e\n\n\u003ch2\u003eSpeed Without a Compressor\u003c\/h2\u003e\n\u003cp\u003eCO2 delivers air on demand at full pressure from the first second, so there is no waiting for a motor to spool up and no stopping mid-session to let a compressor cool down. For a driver airing up four tires after a trail run, that difference is meaningful: the entire process, including setup and stowing the system, takes under five minutes. The Super Flow regulator is designed for high flow and high pressure and is built to never freeze-clog, which matters when CO2 expansion drops temperatures sharply during rapid inflation.\u003c\/p\u003e\n\n\u003ch2\u003eNo Moving Parts, No Electronics\u003c\/h2\u003e\n\u003cp\u003eThe 10 lb Power Tank system has no motor, no pump, and no circuit board. Consistent CO2 pressure is the only mechanism, which means there is nothing to burn out, seize, or drain a battery on the trail. The Super Flex hose is rated to 400 psi working pressure and 1,200 psi burst pressure, and its construction resists shattering in cold conditions. The Super Coupler connects and disconnects at 0 psi regardless of the pressure in the hose, and accepts any standard air tool plug style, so the same system that airs up tires can run an impact wrench or blow out an air filter without an adapter swap.\u003c\/p\u003e\n\u003cp\u003eThe Power Grip Guard handle is machined from 6061 aluminum to protect the valve and regulator from impacts during transport and trail use. The tank itself carries an Armorcoat finish and a limited lifetime warranty: if the bottle fails its five-year recertification test, Power Tank replaces it. The Super Flow regulator, handle, and Super Coupler each carry their own limited lifetime warranty and are fully rebuildable. A Carbon Regulator Cover is included to protect the regulator between uses.\u003c\/p\u003e\n\n\u003ch2\u003eConfigurable for Your Setup\u003c\/h2\u003e\n\u003cp\u003eFive tire inflator gauge options let buyers match the gauge to their typical pressure range and preferred readout style. The Trooper (0–60 psi, analog) suits standard street-to-trail pressure swings. The Rubicon (1.5–60 psi, digital) adds a low-end digital readout for precise airing-down confirmation. The Long-Haul (0–150 psi, analog) covers truck, trailer, and high-pressure applications. The Work Horse (5–150 psi, digital) gives a digital readout across that same wide range. The Racer Series (0–100 psi, precision digital) is built for applications where accuracy at every psi matters. Hose choice, coiled or straight 30 ft, is selected at the same time. The Super Bracket is included and pairs with a separately sold vehicle-specific mount for in-vehicle storage.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuper Flow Regulator:\u003c\/strong\u003e adjustable, high-flow, high-pressure, never freeze-clogs, fully rebuildable, limited lifetime warranty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Grip Guard Handle:\u003c\/strong\u003e machined 6061 aluminum, protects valve and regulator from impacts, limited lifetime warranty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuper Flex Hose:\u003c\/strong\u003e 30 ft (coiled or straight), 400 psi working pressure, 1,200 psi burst pressure, cold-resistant, swivels at both ends\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuper Coupler:\u003c\/strong\u003e connects and disconnects at 0 psi, accepts any air tool plug style, compact aluminum construction, rebuildable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArmorcoat Tank:\u003c\/strong\u003e durable finish, limited lifetime warranty, recertification guaranteed for the life of the bottle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCarbon Regulator Cover:\u003c\/strong\u003e included to protect the regulator during storage and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTank Capacity\u003c\/td\u003e\n      \u003ctd\u003e10 lb CO2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHeight (with handle)\u003c\/td\u003e\n      \u003ctd\u003e26 inches\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDiameter\u003c\/td\u003e\n      \u003ctd\u003e6.9 inches\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLength (to front of handle)\u003c\/td\u003e\n      \u003ctd\u003e8 inches\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShipping Weight\u003c\/td\u003e\n      \u003ctd\u003e27 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose Length\u003c\/td\u003e\n      \u003ctd\u003e30 ft (coiled or straight, per variant)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose Working Pressure\u003c\/td\u003e\n      \u003ctd\u003e400 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose Burst Pressure\u003c\/td\u003e\n      \u003ctd\u003e1,200 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHandle Material\u003c\/td\u003e\n      \u003ctd\u003e6061 aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTank Finish \/ Color Options\u003c\/td\u003e\n      \u003ctd\u003eArmorcoat: Gloss Black, Candy Blue, Candy Red\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eGauge Options\u003c\/td\u003e\n      \u003ctd\u003eTrooper 0–60 psi Analog; Rubicon 1.5–60 psi Digital; Long-Haul 0–150 psi Analog; Work Horse 5–150 psi Digital; Racer Series 0–100 psi Precision Digital\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecertification Interval\u003c\/td\u003e\n      \u003ctd\u003eEvery 5 years (US requirement for all gas cylinders)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003eUniversal (not vehicle-specific)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe 10 lb Power Tank suits off-road drivers and overlanders who air down for the trail and need to air back up quickly without a compressor, including those running Jeep, Bronco, Toyota, and similar vehicles with tires up to 42 inches. The system also works for anyone who needs portable air tool capability (impact wrenches, nail guns, air lockers) away from shore power.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe 10 lb Power Tank runs on liquid CO2 and must be refilled at a local CO2 refill business; it is not suitable for buyers without a convenient refill source. All US gas cylinders must be recertified every five years at the owner's expense. A vehicle-specific mount for in-vehicle storage is sold separately and is not included in this package.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhere do I get the tank refilled?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 10 lb Power Tank runs on liquid CO2 and must be refilled at a local CO2 refill business. Businesses that typically handle CO2 refills include fire extinguisher service shops, beverage carbonics suppliers, welding gas supply stores, hydroponics shops, and specialty aquarium retailers.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow many tires can the 10 lb tank fill?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eOn a full charge, the 10 lb Power Tank can air up approximately 18 tires sized 35x12.50x17 inches. Fill counts vary with tire size and the amount of pressure being added; Power Tank publishes a full tire fill chart on their website for other tire sizes and pressure differentials.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow fast does it inflate a tire?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 10 lb Power Tank airs up a 35x12.50x17-inch tire by 15 psi in approximately 38 seconds. All Power Tank systems, regardless of bottle size, inflate at the same rate of speed; the larger tank simply provides more total fills before needing a refill.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat gauge option should I choose?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Trooper (0–60 psi analog) covers standard passenger and light truck tire ranges. The Rubicon (1.5–60 psi digital) adds precision at the low end for airing-down confirmation. The Long-Haul (0–150 psi analog) and Work Horse (5–150 psi digital) suit truck, trailer, and higher-pressure applications. The Racer Series (0–100 psi precision digital) is built for applications requiring accuracy at every psi increment.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the package?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 10 lb Power Tank Single Bottle package includes the 10 lb Armorcoat CO2 tank, Super Flow adjustable regulator, Power Grip Guard aluminum handle, 30 ft Super Flex hose (coiled or straight per variant selection), Super Coupler, the selected tire inflator gauge, Super Bracket, and a Carbon Regulator Cover. A vehicle-specific mount for in-vehicle storage is sold separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the hose work in cold weather?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Super Flex hose included with the 10 lb Power Tank is constructed to resist shattering in cold conditions, which is relevant because CO2 expansion during rapid inflation drops temperatures significantly. The hose is rated to 400 psi working pressure and 1,200 psi burst pressure and features high-quality swivels at both ends.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Gloss Black \/ Trooper - 0-60 Analog \/ 30 ft Coiled","offer_id":50621655613510,"sku":"PT10-BBKLA3C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Trooper - 0-60 Analog \/ 30 ft Straight","offer_id":50621655646278,"sku":"PT10-BBKLA3S","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Rubicon - 1.5-60 Digital \/ 30 ft Coiled","offer_id":50621655679046,"sku":"PT10-BBKLD3C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Rubicon - 1.5-60 Digital \/ 30 ft Straight","offer_id":50621655711814,"sku":"PT10-BBKLD3S","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Long-Haul - 0-150 Analog \/ 30 ft Coiled","offer_id":50621655744582,"sku":"PT10-BBKHA3C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Long-Haul - 0-150 Analog \/ 30 ft Straight","offer_id":50621655777350,"sku":"PT10-BBKHA3S","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Work Horse - 5-150 Digital \/ 30 ft Coiled","offer_id":50621655810118,"sku":"PT10-BBKHD3C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Work Horse - 5-150 Digital \/ 30 ft Straight","offer_id":50621655842886,"sku":"PT10-BBKHD3S","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Racer Series - 0-100 Precision Digital \/ 30 ft Coiled","offer_id":50621655875654,"sku":"PT10-BBKRS3C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Racer Series - 0-100 Precision Digital \/ 30 ft Straight","offer_id":50621655908422,"sku":"PT10-BBKRS3S","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Trooper - 0-60 Analog \/ 30 ft Coiled","offer_id":50621655941190,"sku":"PT10-BCBLA3C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Trooper - 0-60 Analog \/ 30 ft Straight","offer_id":50621655973958,"sku":"PT10-BCBLA3S","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Rubicon - 1.5-60 Digital \/ 30 ft Coiled","offer_id":50621656006726,"sku":"PT10-BCBLD3C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Rubicon - 1.5-60 Digital \/ 30 ft Straight","offer_id":50621656039494,"sku":"PT10-BCBLD3S","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Long-Haul - 0-150 Analog \/ 30 ft Coiled","offer_id":50621656072262,"sku":"PT10-BCBHA3C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Long-Haul - 0-150 Analog \/ 30 ft Straight","offer_id":50621656105030,"sku":"PT10-BCBHA3S","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Work Horse - 5-150 Digital \/ 30 ft Coiled","offer_id":50621656137798,"sku":"PT10-BCBHD3C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Work Horse - 5-150 Digital \/ 30 ft Straight","offer_id":50621656170566,"sku":"PT10-BCBHD3S","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Racer Series - 0-100 Precision Digital \/ 30 ft Coiled","offer_id":50621656203334,"sku":"PT10-BCBRS3C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Blue \/ Racer Series - 0-100 Precision Digital \/ 30 ft Straight","offer_id":50621656236102,"sku":"PT10-BCBRS3S","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Trooper - 0-60 Analog \/ 30 ft Coiled","offer_id":50621656268870,"sku":"PT10-BCRLA3C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Trooper - 0-60 Analog \/ 30 ft Straight","offer_id":50621656301638,"sku":"PT10-BCRLA3S","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Rubicon - 1.5-60 Digital \/ 30 ft Coiled","offer_id":50621656334406,"sku":"PT10-BCRLD3C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Rubicon - 1.5-60 Digital \/ 30 ft Straight","offer_id":50621656367174,"sku":"PT10-BCRLD3S","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Long-Haul - 0-150 Analog \/ 30 ft Coiled","offer_id":50621656399942,"sku":"PT10-BCRHA3C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Long-Haul - 0-150 Analog \/ 30 ft Straight","offer_id":50621656432710,"sku":"PT10-BCRHA3S","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Work Horse - 5-150 Digital \/ 30 ft Coiled","offer_id":50621656465478,"sku":"PT10-BCRHD3C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Work Horse - 5-150 Digital \/ 30 ft Straight","offer_id":50621656498246,"sku":"PT10-BCRHD3S","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Racer Series - 0-100 Precision Digital \/ 30 ft Coiled","offer_id":50621656531014,"sku":"PT10-BCRRS3C","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Candy Red \/ Racer Series - 0-100 Precision Digital \/ 30 ft Straight","offer_id":50621656563782,"sku":"PT10-BCRRS3S","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/PT10-5250-B_v3.jpg?v=1791935973"},{"product_id":"power-tank-super-stiffy-regulator-coupler-extension-with-super-coupler","title":"Power Tank Super Stiffy Regulator Coupler Extension with Super Coupler","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Super Stiffy is a 10-inch flexible stainless steel braided extension that mounts between a Power Tank Super Flow regulator and an included Super Coupler, solving the cold-weather side-pull leak that develops when CO2 chills and hardens the rubber seal in a standard regulator coupler. It is designed for Power Tank users who run their systems hard and need a reliable, rebuildable coupler connection rated to 400 psi.\u003c\/p\u003e\n\n\u003ch2\u003eStops Cold-Weather Side-Pull Leaks\u003c\/h2\u003e\n\u003cp\u003eA standard regulator coupler is fixed in place, so any lateral pull on the hose stresses the rubber seal directly. In cold CO2 conditions that seal hardens and loses its ability to compensate, producing a slow leak at the coupler. The Super Stiffy's braided extension lets the coupler pivot and follow the hose rather than resist it, keeping the connection in line and the seal seated regardless of hose angle. For users who air down multiple vehicles or run long inflation sessions, that difference between a dripping coupler and a dry one is meaningful.\u003c\/p\u003e\n\n\u003ch2\u003eUniversal Coupler Accepts Nearly Any Air Tool Plug\u003c\/h2\u003e\n\u003cp\u003eThe included Super Coupler accepts industrial, ARO, automotive, and Lincoln exchange plugs, so borrowed tools and shop equipment connect without adapters. The on\/off collar (internal bleed) holds the coupler at zero psi when no tool is plugged in. Switching the collar on allows pressure to flow; switching it off bleeds downstream pressure before the tool is unplugged. The result is that tools neither shoot out of the coupler nor cause hose whip on disconnect, which matters when working around a vehicle on uneven terrain.\u003c\/p\u003e\n\n\u003ch2\u003eAluminum Construction, Rebuildable, Rated to 400 psi\u003c\/h2\u003e\n\u003cp\u003eThe Super Coupler is machined from aluminum rather than brass, reducing weight while raising the working pressure ceiling to 400 psi. Competing brass couplers are typically rated to 150-175 psi. The Super Coupler is also rebuildable, meaning worn seals can be replaced rather than discarding the entire coupler. The extension arrives with teflon tape pre-installed on the threads, so no additional thread sealant is needed at installation.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e10-inch braided extension:\u003c\/strong\u003e flexible stainless steel line that lets the coupler follow the hose and relieve side-pull stress on the seal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal Super Coupler:\u003c\/strong\u003e accepts industrial, ARO, automotive, and Lincoln exchange plugs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOn\/off collar (internal bleed):\u003c\/strong\u003e plug and unplug air tools at zero psi, eliminating hose whip and tool ejection\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e400 psi working pressure:\u003c\/strong\u003e all-aluminum coupler rated well above standard brass alternatives\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRebuildable coupler:\u003c\/strong\u003e seals can be replaced without replacing the entire coupler\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeflon tape pre-installed:\u003c\/strong\u003e no additional thread sealant required at installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eREG-1000\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eExtension Length\u003c\/td\u003e\n      \u003ctd\u003e10 inches\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eExtension Construction\u003c\/td\u003e\n      \u003ctd\u003eFlexible stainless steel braided line\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCoupler Construction\u003c\/td\u003e\n      \u003ctd\u003eAll-aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCoupler Working Pressure\u003c\/td\u003e\n      \u003ctd\u003e400 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Regulators\u003c\/td\u003e\n      \u003ctd\u003ePower Tank Super Flow regulators\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThread Sealant\u003c\/td\u003e\n      \u003ctd\u003eTeflon tape (pre-installed)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.2 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Super Stiffy suits Power Tank users who run Super Flow regulators and have experienced side-pull leaking at the standard coupler, or who want a universal coupler that accepts multiple plug standards and operates safely at zero psi on connect and disconnect.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Super Stiffy installs only on Power Tank Super Flow regulators. The hose end of the Super Stiffy requires a female threaded coupler; an existing NPT male threaded coupler cannot be reused on that end.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Power Tank regulators does the Super Stiffy fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Super Stiffy installs on any Power Tank Super Flow regulator. Installation involves removing the standard coupler and threading the Super Stiffy into its place; teflon tape is pre-applied to the threads.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat air tool plug standards does the included Super Coupler accept?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Super Coupler included with the Super Stiffy accepts industrial, ARO, automotive, and Lincoln exchange plugs, covering the most common air tool plug standards used in overlanding and shop environments.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the working pressure rating of the Super Coupler?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe all-aluminum Super Coupler is rated to 400 psi working pressure. Standard brass couplers from competing brands are typically rated to 150-175 psi.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan I reuse my existing NPT male coupler with the Super Stiffy?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The hose end of the Super Stiffy extension uses incompatible threads that require a female threaded coupler. The existing NPT male threaded coupler from a standard setup cannot be reused on that end and should be kept as a spare.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621658398790,"sku":"REG-1000","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/70711175-c629-465c-a3f0-7f39cff46b22-sq.jpg?v=1791936034"},{"product_id":"power-tank-eva-zippered-case-for-shock-inflators-and-gauges","title":"Power Tank EVA Zippered Case for Shock Inflators and Gauges","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank EVA Zippered Case is a black nylon, EVA-molded protective pouch built to store and protect Power Tank Shock Inflators and Tire Pressure Gauges. The zippered closure keeps contents secure, and a molded Power Tank logo identifies the case at a glance. The case also serves as a general-purpose pouch for other small tools and accessories.\u003c\/p\u003e\n\n\u003ch2\u003ePurpose-Built Storage for Precision Tools\u003c\/h2\u003e\n\u003cp\u003eShock inflators and tire pressure gauges are small, precision instruments that can be scratched, dented, or lost when loose in a gear bag or storage bin. The Power Tank EVA Zippered Case gives these tools a dedicated home, keeping them organized and protected between uses. A zippered closure holds everything in place whether the case is packed flat or standing upright in a vehicle.\u003c\/p\u003e\n\n\u003ch2\u003eEVA Molding Holds Its Shape\u003c\/h2\u003e\n\u003cp\u003eThe EVA-molded body gives the case more structure than a flat fabric pouch, maintaining its form around tools rather than collapsing under the weight of surrounding gear. The black nylon exterior resists abrasion from contact with harder equipment in a storage bin or pack. The molded Power Tank logo makes the case easy to spot in a crowded gear setup.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEVA-molded construction:\u003c\/strong\u003e holds shape around tools and resists compression from surrounding gear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlack nylon exterior:\u003c\/strong\u003e abrasion-resistant fabric for everyday handling and storage\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eZippered closure:\u003c\/strong\u003e keeps contents secure during transport\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMolded Power Tank logo:\u003c\/strong\u003e easy identification in a multi-brand gear setup\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesigned for Shock Inflators and Tire Pressure Gauges:\u003c\/strong\u003e purpose-built fit for Power Tank tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShell material\u003c\/td\u003e\n      \u003ctd\u003eEVA (molded)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eExterior material\u003c\/td\u003e\n      \u003ctd\u003eBlack nylon\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eClosure\u003c\/td\u003e\n      \u003ctd\u003eZipper\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLogo\u003c\/td\u003e\n      \u003ctd\u003eMolded Power Tank logo\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eCSE-0100\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Power Tank EVA Zippered Case suits Power Tank Shock Inflator and Tire Pressure Gauge owners who want a dedicated, branded pouch to keep those tools protected and organized in a vehicle, gear bag, or storage bin. It also works for other small accessories that fit within the case.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe case is a soft EVA-molded pouch, not a rigid hard-shell case, and does not provide the impact protection of a molded hard case. Interior dimensions are not specified; fit for items other than Power Tank Shock Inflators and Tire Pressure Gauges is not confirmed.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the Power Tank EVA Zippered Case designed to hold?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank EVA Zippered Case is purpose-built to store and protect Power Tank Shock Inflators and Tire Pressure Gauges. The EVA-molded construction and zippered closure keep these small precision tools secure and organized in a gear bag or vehicle storage setup.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat materials is the case made from?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank EVA Zippered Case features an EVA-molded body and a black nylon exterior. EVA molding gives the case a defined shape that holds around tools, while the nylon exterior resists abrasion during everyday handling and storage.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs this a rigid hard case or a soft pouch?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank EVA Zippered Case uses EVA molding, which gives it more structure than a flat fabric pouch, but it is not a rigid hard-shell case. It is best suited for protecting small tools from scratches and light contact rather than heavy impacts.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the case hold items other than Power Tank tools?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank EVA Zippered Case works as a general-purpose pouch for other small accessories and tools. Interior dimensions are not specified; fit for items other than Power Tank Shock Inflators and Tire Pressure Gauges is not confirmed.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621680058438,"sku":"CSE-0100","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/CSE-0100.jpg?v=1791936082"},{"product_id":"power-tank-monster-valve-spacer-for-recessed-valve-stems","title":"Power Tank Monster Valve Spacer for Recessed Valve Stems","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Monster Valve Spacer is an aluminum mounting spacer designed for installing Monster Valves in recessed valve stem holes. Available in 6mm and 12mm lengths, each spacer includes a machined groove and o-ring to maintain a leak-free seal at the valve base. The 6mm spacer fits the Medium Stem (20mm), Long Stem (36mm), and Angled Stem; the 12mm spacer fits the Long Stem (36mm) only.\u003c\/p\u003e\n\n\u003ch2\u003eSeals the Gap Without Leaks\u003c\/h2\u003e\n\u003cp\u003eRecessed valve stem holes sit deeper than a standard wheel face, which means a Monster Valve installed without a spacer can gap at the base and allow air to escape around the stem rather than through it. The Monster Valve Spacer closes that gap with a precision-fit aluminum body. The machined groove seats an o-ring that compresses against the valve and the wheel surface, keeping the seal intact under inflation pressure.\u003c\/p\u003e\n\n\u003ch2\u003eCorrect Length Matters for a Proper Fit\u003c\/h2\u003e\n\u003cp\u003eChoosing the right spacer length depends on which Monster Valve stem you are running and how deep the recess in your wheel measures. The 6mm spacer covers three stem configurations (Medium 20mm, Long 36mm, and Angled), giving it broader compatibility across common Monster Valve setups. The 12mm spacer is purpose-built for deeper recesses and works exclusively with the Long Stem (36mm). Both lengths are also compatible with Monster Valve Flat and Monster Valve Primary when used with the angle adapter.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAluminum construction:\u003c\/strong\u003e machined aluminum body resists corrosion at the wheel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGroove and o-ring seal:\u003c\/strong\u003e prevents air leakage around the valve base in recessed holes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6mm compatibility:\u003c\/strong\u003e fits Medium Stem (20mm), Long Stem (36mm), and Angled Stem\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e12mm compatibility:\u003c\/strong\u003e fits Long Stem (36mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMonster Valve Flat and Primary compatible:\u003c\/strong\u003e works with the angle adapter on both valve types\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003e6mm Spacer (MON-7610)\u003c\/th\u003e\n      \u003cth\u003e12mm Spacer (MON-7613)\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLength\u003c\/td\u003e\n      \u003ctd\u003e6mm\u003c\/td\u003e\n      \u003ctd\u003e12mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSeal\u003c\/td\u003e\n      \u003ctd\u003eGroove and o-ring\u003c\/td\u003e\n      \u003ctd\u003eGroove and o-ring\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Stems\u003c\/td\u003e\n      \u003ctd\u003eMedium Stem (20mm), Long Stem (36mm), Angled Stem\u003c\/td\u003e\n      \u003ctd\u003eLong Stem (36mm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Valve Types\u003c\/td\u003e\n      \u003ctd\u003eMonster Valve Flat, Monster Valve Primary (with angle adapter)\u003c\/td\u003e\n      \u003ctd\u003eMonster Valve Flat, Monster Valve Primary (with angle adapter)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese spacers are for Monster Valve owners whose wheels have recessed valve stem holes, a common feature on beadlock and aftermarket off-road wheels, where a standard flush mount leaves a gap at the valve base. Both lengths work with Monster Valve Flat and Monster Valve Primary setups.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe 12mm spacer fits only the Long Stem (36mm) and does not fit the Medium Stem (20mm) or the Angled Stem. Neither spacer is a standalone valve stem; a Monster Valve stem must already be purchased separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow do I know whether I need the 6mm or 12mm spacer?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe correct Monster Valve Spacer length depends on the depth of the recess in your specific wheel and the stem length you are running. The 6mm spacer fits the Medium Stem (20mm), Long Stem (36mm), and Angled Stem. The 12mm spacer fits only the Long Stem (36mm) and is intended for deeper recesses. Measure your wheel's recess depth before ordering if you are unsure.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes the spacer work with Monster Valve Flat?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. Both the 6mm and 12mm Monster Valve Spacers are compatible with Monster Valve Flat and Monster Valve Primary when used with the angle adapter. Check that your stem length matches the spacer's compatibility list before installing.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat prevents air from leaking around the spacer?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach Monster Valve Spacer includes a machined groove that seats an o-ring. When the spacer is installed, the o-ring compresses between the valve body and the wheel surface, creating a leak-free seal even in recessed holes where the valve base would otherwise sit proud of the seating surface.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"6mm","offer_id":50621680386118,"sku":"MON-7610","price":2.99,"currency_code":"USD","in_stock":true},{"title":"12mm","offer_id":50621680418886,"sku":"MON-7613","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/MonsterValvePart-12mmSpacer2.png?v=1791936129"},{"product_id":"power-tank-monster-valve-flanged-seal-replacement","title":"Power Tank Monster Valve Flanged Seal Replacement","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Monster Valve Flanged Seal is a single-use mounting seal designed to secure Monster Valves in factory valve stem holes. It is the standard seal included with the MV-FLAT2 and MV-Primary Monster Valves and must be replaced each time a Monster Valve is remounted. Sold individually, one seal per purchase.\u003c\/p\u003e\n\n\u003ch2\u003eA Proper Seal Every Time You Remount\u003c\/h2\u003e\n\u003cp\u003eThe flanged seal creates the mounting interface between a Monster Valve and the factory valve stem hole in the wheel. Because the seal compresses and conforms during installation, reusing it risks an incomplete or leaking mount. Replacing it with a fresh seal each time a Monster Valve is removed and reinstalled keeps the connection secure and airtight.\u003c\/p\u003e\n\n\u003ch2\u003eThe Right Part for MV-FLAT2 and MV-Primary Valves\u003c\/h2\u003e\n\u003cp\u003eThis seal is the standard mounting component for the MV-FLAT2 and MV-Primary Monster Valves. Keeping a few on hand means a remount in the field or at home does not stall for a missing consumable. Because it is sold as each, buyers can order exactly the quantity needed for a planned remount or to replenish a trail kit.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle-use design:\u003c\/strong\u003e replaces each time a Monster Valve is remounted for a reliable seal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory hole compatible:\u003c\/strong\u003e sized for standard factory valve stem holes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard fitment:\u003c\/strong\u003e the seal included with MV-FLAT2 and MV-Primary Monster Valves\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold as each:\u003c\/strong\u003e order the exact quantity needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Valves\u003c\/td\u003e\n      \u003ctd\u003eMV-FLAT2, MV-Primary\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting Location\u003c\/td\u003e\n      \u003ctd\u003eFactory valve stem hole\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eReusability\u003c\/td\u003e\n      \u003ctd\u003eSingle-use\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSold As\u003c\/td\u003e\n      \u003ctd\u003eEach (1 seal)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eMON-7612\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis seal is for owners of Power Tank MV-FLAT2 or MV-Primary Monster Valves who are remounting their valves and need a fresh mounting seal. It is the correct replacement consumable for those two valve models when installed in factory valve stem holes.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis seal is not confirmed compatible with Monster Valve models other than the MV-FLAT2 and MV-Primary. It is not reusable. A seal that has already been compressed during a prior installation should not be reinstalled.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the Monster Valve Flanged Seal do?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Monster Valve Flanged Seal is the mounting seal that secures a Power Tank Monster Valve in a factory wheel valve stem hole. It creates the interface between the valve body and the wheel, and must be replaced with a fresh seal each time the Monster Valve is removed and reinstalled to maintain a proper, airtight mount.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Monster Valve models does this seal fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank Monster Valve Flanged Seal is the standard seal for the MV-FLAT2 and MV-Primary Monster Valves. Compatibility with other Monster Valve models is not stated; contact TerrainVault before ordering for a different valve model.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan this seal be reused after a Monster Valve is removed?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Monster Valve Flanged Seal is single-use. Once a Monster Valve has been mounted and the seal compressed, the seal should be discarded and replaced with a new one before the valve is remounted. Reusing a compressed seal risks an incomplete or leaking installation.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621681008710,"sku":"MON-7612","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/MON-7517_CALLOUT_8f6f286b-9fa4-4ba1-b0e2-fb77b621d159.jpg?v=1791936178"},{"product_id":"power-tank-bag-content-cards-5-pack","title":"Power Tank Bag Content Cards 5-Pack","description":"\u003cp class=\"product-lead\"\u003ePower Tank Bag Content Cards are replacement organizational cards sold in a 5-pack, designed for use with Power Tank bags when swapping or reorganizing the contents of a CO2 tire inflation kit.\u003c\/p\u003e\n\n\u003ch2\u003eStay Organized Across Every Setup\u003c\/h2\u003e\n\u003cp\u003eWhen a CO2 tire inflation system gets reconfigured (swapping regulators, hoses, or accessories between bags), the original content card no longer reflects what's inside. Having a fresh card on hand means the bag's contents stay documented accurately, which matters when pulling gear quickly on the trail or at a job site.\u003c\/p\u003e\n\n\u003ch2\u003eSold as a 5-Pack\u003c\/h2\u003e\n\u003cp\u003eEach order includes five content cards, providing enough extras to cover multiple bag reconfigurations or to keep spares on hand across a fleet of vehicles or a shop inventory.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e5-Pack quantity:\u003c\/strong\u003e five replacement content cards per order\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesigned for Power Tank bags:\u003c\/strong\u003e intended for use when switching out bag contents\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese content cards suit Power Tank bag owners who regularly reconfigure their CO2 tire inflation kits and need accurate labeling after each change.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese cards are not a standalone product and serve no function without Power Tank bags. They do not include any bag, regulator, hose, or other inflation hardware.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow many content cards come in one order?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach order of Power Tank Bag Content Cards includes five cards, giving enough supply to cover multiple bag reconfigurations or to keep extras on hand for future use.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat are these content cards used for?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003ePower Tank Bag Content Cards are used to document what is stored inside a Power Tank bag after its contents have been changed. Keeping the card current helps with quick gear identification on the trail or in a shop environment.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo these cards work with all Power Tank bags?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003ePower Tank Bag Content Cards are designed for use with Power Tank bags. Specific bag model compatibility is not detailed in the available product data; contact TerrainVault before ordering if you need to confirm fit with a particular bag model.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621681238086,"sku":"BAG-9005","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/BAG-9005_HERO.jpg?v=1791936190"},{"product_id":"power-tank-gold-cap-for-20-oz-co2-bottle-cga-323-valve","title":"Power Tank Gold Cap for 20 oz CO2 Bottle CGA 323 Valve","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Gold Cap is a replacement valve cap for 20 oz Power Tank CO2 bottles fitted with a CGA 323 valve. It keeps the valve port protected when the regulator is not attached, and it is sold individually.\u003c\/p\u003e\n\n\u003ch2\u003eProtects the CGA 323 Valve Between Uses\u003c\/h2\u003e\n\u003cp\u003eA CO2 bottle's CGA 323 valve port is exposed whenever the regulator is removed. The Power Tank Gold Cap threads onto the valve to cover the port, shielding the threads and sealing surface from trail dust, mud, and incidental contact that could compromise a clean regulator connection later.\u003c\/p\u003e\n\n\u003ch2\u003eDirect Replacement, Correct Fit\u003c\/h2\u003e\n\u003cp\u003eThe Gold Cap is sized specifically for the CGA 323 valve standard used on Power Tank 20 oz CO2 bottles. Using a cap matched to the correct valve standard avoids cross-threading and ensures the cap seats fully without forcing.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCGA 323 Compatibility:\u003c\/strong\u003e fits the valve standard used on Power Tank 20 oz CO2 bottles\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReplacement Part:\u003c\/strong\u003e sold individually as a direct replacement for a lost or damaged cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eValve Compatibility\u003c\/td\u003e\n      \u003ctd\u003eCGA 323\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFits Bottle Size\u003c\/td\u003e\n      \u003ctd\u003e20 oz Power Tank CO2 bottle\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eListed Weight\u003c\/td\u003e\n      \u003ctd\u003e3 oz\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eVLV-5009\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Power Tank Gold Cap suits any Power Tank 20 oz CO2 bottle owner who needs to replace a missing or damaged CGA 323 valve cap and wants to keep the valve port covered when the regulator is off the bottle.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis cap fits CGA 323 valves only. It is not a regulator, not a valve stem, and compatibility with 10 lb and 15 lb Power Tank tank valves is not stated for this cap.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Power Tank bottles does this cap fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank Gold Cap fits 20 oz Power Tank CO2 bottles with a CGA 323 valve. Compatibility with 10 lb and 15 lb Power Tank tank valves is not stated for this cap.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs this cap included with a new 20 oz Power Tank bottle?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Gold Cap is sold individually as a replacement part. Whether a cap ships with a new 20 oz Power Tank bottle is not stated in the product data for this item; check the bottle listing for what is included.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this cap replace the regulator or serve as a pressure seal?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank Gold Cap is a protective valve cap, not a regulator or a pressure-rated seal. It covers the CGA 323 valve port when the regulator is removed to protect the valve threads and sealing surface.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621683957830,"sku":"VLV-5009","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/VLV-5009.jpg?v=1791936265"},{"product_id":"power-tank-monster-valve-rebuild-kit-5-pack","title":"Power Tank Monster Valve Rebuild Kit (5-Pack)","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Monster Valve Rebuild Kit restores five Monster Valve high-flow valve stems to like-new sealing performance using a matched set of replacement o-rings and silicone grease. Each kit includes the two o-rings that wear first (the red-collar o-ring and the stem o-ring) for five valves, making it practical to service a full set of spares or a shop's worth of installs in a single pass. Compatible with every current Monster Valve variant: MV1, MV2, MV3, MV4, MV-Tap, MV-Wedge, and MV-Flat.\u003c\/p\u003e\n\n\u003ch2\u003eRebuild Rather Than Replace\u003c\/h2\u003e\n\u003cp\u003eMonster Valve stems seal through two o-rings (one at the red collar and one at the stem), and those o-rings are the only components that degrade with use. Swapping them out and applying fresh silicone grease restores the valve's air-tight seal without discarding the machined body, keeping a quality part in service instead of sending it to the bin. For overlanders who run CO2 systems hard and depend on fast, reliable tire inflation in the field, a functioning valve stem is not optional. This kit makes it straightforward to keep every valve ready.\u003c\/p\u003e\n\n\u003ch2\u003eCovers a Full Set at Once\u003c\/h2\u003e\n\u003cp\u003eThe five-valve quantity matches the number of tires on a typical four-wheel-drive rig with a full-size spare, so one kit handles a complete vehicle refresh in a single order. Shops or overlanders running multiple rigs can stock a kit per vehicle without over-ordering. The included silicone grease packet is sized for the o-rings in this kit and lubricates the sealing surfaces to reduce friction and extend the life of the new o-rings.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRed-collar o-rings:\u003c\/strong\u003e five replacement o-rings for the collar sealing surface on each Monster Valve\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStem o-rings:\u003c\/strong\u003e five replacement o-rings for the stem sealing surface on each Monster Valve\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSilicone grease packet:\u003c\/strong\u003e included lubricant sized for the o-rings in this kit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBroad variant compatibility:\u003c\/strong\u003e fits MV1, MV2, MV3, MV4, MV-Tap, MV-Wedge, and MV-Flat\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eKit quantity\u003c\/td\u003e\n      \u003ctd\u003eRebuilds 5 Monster Valve stems\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eContents\u003c\/td\u003e\n      \u003ctd\u003e5 red-collar o-rings, 5 stem o-rings, 1 silicone grease packet\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible valves\u003c\/td\u003e\n      \u003ctd\u003eMV1, MV2, MV3, MV4, MV-Tap, MV-Wedge, MV-Flat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBrand\u003c\/td\u003e\n      \u003ctd\u003ePower Tank\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eMON-1000\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis kit is for owners of Power Tank Monster Valve high-flow valve stems (any variant from MV1 through MV-Flat) who want to restore sealing performance rather than replace the entire valve. It suits overlanders, off-road shops, and anyone maintaining a CO2 or compressed-air tire inflation setup where valve reliability matters.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis rebuild kit does not replace the Monster Valve stem itself; it services the o-rings only. It is not compatible with standard Schrader or Presta valve stems, and it does not include any tools for the rebuild procedure.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Monster Valve variants does this rebuild kit fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank Monster Valve Rebuild Kit is compatible with all current Monster Valve variants: MV1, MV2, MV3, MV4, MV-Tap, MV-Wedge, and MV-Flat. One kit services five valves of any mix of those variants.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the kit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach kit contains five red-collar o-rings, five stem o-rings, and one packet of silicone grease. The o-rings address the two sealing surfaces that wear with use; the grease lubricates them after installation to extend service life.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow does the rebuild work?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eRebuilding a Monster Valve involves replacing the worn o-rings at the red collar and the stem, then applying the included silicone grease to keep the new o-rings sealing smoothly. Power Tank designed the Monster Valve to be serviceable this way so the machined valve body can remain in use rather than being discarded.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill this kit work with standard Schrader or Presta valve stems?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The o-rings in this Monster Valve Rebuild Kit are sized and configured for Power Tank Monster Valve stems specifically. They are not interchangeable with standard Schrader or Presta valve hardware.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621684383814,"sku":"MON-1000","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/MVREBUILDKITPACKAGE.jpg?v=1791936286"},{"product_id":"power-tank-monster-valve-3-8-24-tap-and-q-drill-bit-combo","title":"Power Tank Monster Valve 3\/8-24 Tap and Q Drill Bit Combo","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Monster Valve 3\/8-24 Tap and Q Drill Bit Combo is the dedicated installation tool set for Monster Valve TAP2 and TAP3 high-flow valve stems, providing the correct 3\/8-24 straight thread tap and matching Q-size drill bit needed to prepare a wheel or hub mounting hole for either stem.\u003c\/p\u003e\n\n\u003ch2\u003eCorrect Thread, First Time\u003c\/h2\u003e\n\u003cp\u003eThe 3\/8-24 tap cuts a straight thread, which is the thread form Monster Valve TAP2 and TAP3 require. Because the thread is straight rather than tapered, there is no risk of cutting the hole too deep and compromising the fit (a common concern with tapered-thread installations). Getting the thread right on the first pass means the valve seats securely and seals reliably, which matters when you are airing up on the trail and need confidence in every connection.\u003c\/p\u003e\n\n\u003ch2\u003eOne Kit, Two Compatible Materials\u003c\/h2\u003e\n\u003cp\u003eThe tap cuts cleanly through both steel and aluminum, so the same tool works whether the mounting surface is a steel wheel or an aluminum wheel. Buying a single combo kit rather than sourcing a tap and drill bit separately removes the guesswork of matching sizes and ensures the drill bit and tap are sized to work together for this specific installation.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3\/8-24 straight thread tap:\u003c\/strong\u003e correct thread form for Monster Valve TAP2 and TAP3 installations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQ-size drill bit included:\u003c\/strong\u003e matched drill size for the 3\/8-24 tap, no separate sourcing required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSteel and aluminum compatible:\u003c\/strong\u003e cuts through both common wheel materials\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStraight thread design:\u003c\/strong\u003e eliminates the risk of over-tapping present with tapered-thread systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThread size\u003c\/td\u003e\n      \u003ctd\u003e3\/8-24\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThread type\u003c\/td\u003e\n      \u003ctd\u003eStraight\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDrill bit size\u003c\/td\u003e\n      \u003ctd\u003eQ\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible valve stems\u003c\/td\u003e\n      \u003ctd\u003eMonster Valve TAP2, Monster Valve TAP3\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial compatibility\u003c\/td\u003e\n      \u003ctd\u003eSteel, aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eMON-TPDB\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis combo is for anyone installing Power Tank Monster Valve TAP2 or TAP3 high-flow valve stems who needs the correct tap and drill bit to prepare the mounting hole, whether working on steel or aluminum wheels.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis tap and drill bit are not compatible with other Monster Valve models that use a different thread form, and they are not a general-purpose tap set for other valve stem brands or thread sizes.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Monster Valve models does this tap fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 3\/8-24 tap and Q drill bit combo is designed for Monster Valve TAP2 and TAP3 installations. These are the Monster Valve models that use the 3\/8-24 straight thread. It is not specified for other Monster Valve variants that may use a different thread form.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhy does the straight thread matter compared to a tapered thread?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eA straight thread cuts to a consistent depth without the risk of going too far, which is a known issue with tapered-thread taps. With the 3\/8-24 straight thread tap, the mounting hole reaches the correct specification without the installer needing to stop and check depth repeatedly, reducing the chance of a loose or leaking valve stem seat.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this kit include everything needed to tap the hole?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Monster Valve 3\/8-24 Tap and Q Drill Bit Combo includes the tap and the Q-size drill bit. A tap handle or wrench to drive the tap is not listed as included and would need to be sourced separately. The Monster Valve stem itself is also sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan this tap be used on aluminum wheels?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The 3\/8-24 tap cuts through both steel and aluminum, so it is suitable for use on either wheel material when installing a Monster Valve TAP2 or TAP3 stem.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621687496774,"sku":"MON-TPDB","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2025-11-24-44_de1ef550-c932-49a7-9935-cc2635934f0a.jpg?v=1792013051"},{"product_id":"power-tank-monster-valve-angled-stem-adapter","title":"Power Tank Monster Valve Angled Stem Adapter","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Monster Valve Angled Stem Adapter adds a 30-degree angle to the Monster Valve, adapting it to the TPMS valve stem standard used by many aftermarket and OEM wheels. The adapter accommodates recessed valve stem holes when used with an optional 6mm spacer, and installs with a Flanged Seal, nut, and washer on the backside of the wheel.\u003c\/p\u003e\n\n\u003ch2\u003eTPMS Standard Compatibility Where You Need It\u003c\/h2\u003e\n\u003cp\u003eMany wheels position their valve stem holes at an angle or recess them into the rim, making a straight Monster Valve installation difficult or impossible. The 30-degree angled adapter bridges that gap, letting the Monster Valve seat correctly against the TPMS valve stem standard used by a wide range of wheels. Because not all wheels follow this standard, confirming your wheel's valve stem hole geometry before ordering is important.\u003c\/p\u003e\n\n\u003ch2\u003eRecessed Hole Accommodation\u003c\/h2\u003e\n\u003cp\u003eThe Monster Valve Angled Stem Adapter works with or without a 6mm spacer, giving installers a straightforward way to handle wheels with recessed valve stem holes. Using the spacer brings the sealing surface flush when the hole sits deeper in the rim, so the Flanged Seal, nut, and washer can clamp properly on the backside of the wheel without improvising a fit.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e30-Degree Angle:\u003c\/strong\u003e adapts the Monster Valve to angled or offset valve stem hole positions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTPMS Valve Stem Standard:\u003c\/strong\u003e designed to match the TPMS bracket and valve stem standard used by many wheels\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptional 6mm Spacer Compatibility:\u003c\/strong\u003e works with or without a 6mm spacer for recessed valve stem holes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlanged Seal Use:\u003c\/strong\u003e intended for use in conjunction with a Flanged Seal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBackside Sealing:\u003c\/strong\u003e secured with a nut and washer on the backside of the wheel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAdapter Angle\u003c\/td\u003e\n      \u003ctd\u003e30 degrees\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOptional Spacer Size\u003c\/td\u003e\n      \u003ctd\u003e6mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eMON-7521\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Monster Valve Angled Stem Adapter suits Monster Valve users whose wheels use the TPMS valve stem standard and whose valve stem holes are angled or recessed in a way that prevents a straight installation.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis adapter is not compatible with all wheels, as not all wheels follow the TPMS valve stem standard. The Flanged Seal, 6mm spacer, nut, and washer are not confirmed as included and may need to be sourced separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill this adapter work with my wheels?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Monster Valve Angled Stem Adapter is designed for wheels that follow the TPMS valve stem standard. Not all wheels use this standard, so confirming your wheel's valve stem hole type and geometry before purchasing is recommended.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo I need the 6mm spacer?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Monster Valve Angled Stem Adapter works with or without a 6mm spacer. The spacer is intended for wheels with recessed valve stem holes, where additional depth is needed to bring the sealing surface flush for proper clamping with the Flanged Seal, nut, and washer.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat else do I need to complete the installation?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Monster Valve Angled Stem Adapter is used in conjunction with a Flanged Seal and is compatible with the TPMS bracket. A nut and washer are used to seal the assembly on the backside of the wheel. Whether these components are included or sold separately is not confirmed in the available product data.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621689135174,"sku":"MON-7521","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/MonsterValvePart-AngledStemAdapter3.png?v=1791936428"},{"product_id":"power-tank-monster-valve-tpms-retention-bracket","title":"Power Tank Monster Valve TPMS Retention Bracket","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Monster Valve TPMS Bracket is an anodized aluminum adapter that keeps a factory or aftermarket TPMS sensor active after Monster Valve high-flow valve stems are installed on a wheel. Without this bracket, swapping to Monster Valves as a primary valve stem would leave the TPMS sensor unsecured and the tire pressure monitoring system non-functional. The bracket fits most factory and aftermarket TPMS sensors.\u003c\/p\u003e\n\n\u003ch2\u003eKeep Your TPMS Active Off-Road\u003c\/h2\u003e\n\u003cp\u003eMonster Valve high-flow valve stems are a popular upgrade for airing down and re-inflating tires quickly on the trail, but the larger valve body can displace a factory TPMS sensor. The Monster Valve TPMS Bracket holds the sensor in place so the vehicle's tire pressure monitoring system continues to report accurate readings, avoiding dashboard warnings and keeping safety systems intact during and after a trip.\u003c\/p\u003e\n\n\u003ch2\u003eAnodized Aluminum Construction\u003c\/h2\u003e\n\u003cp\u003eThe bracket is machined from aluminum and finished with an anodized coating, which resists corrosion from mud, water, and trail debris. That durability matters on a component that lives inside the wheel, where it is exposed to heat, road grime, and repeated pressure cycles every time a tire is aired down and reinflated.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTPMS retention:\u003c\/strong\u003e keeps factory TPMS sensor active when Monster Valves are installed as the primary valve stem\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBroad sensor compatibility:\u003c\/strong\u003e fits most factory and aftermarket TPMS sensors\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary valve stem use:\u003c\/strong\u003e also supports configurations where Monster Valves are added as a secondary valve stem alongside the factory stem\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAnodized aluminum:\u003c\/strong\u003e corrosion-resistant finish for in-wheel durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eAnodized Aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eMON-7525\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.1 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis bracket is for overlanders and off-road drivers who are installing Power Tank Monster Valve high-flow valve stems and need to retain an existing factory or aftermarket TPMS sensor. It fits most factory and aftermarket TPMS sensors and supports both primary and secondary Monster Valve configurations.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis bracket is not compatible with most Japanese-market vehicles due to TPMS sensor design differences; owners of Japanese vehicles should confirm TPMS sensor compatibility before installing Monster Valves. This bracket is not a valve stem, not a TPMS sensor, and does not include Monster Valves.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the Monster Valve TPMS Bracket do?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank Monster Valve TPMS Bracket secures a factory or aftermarket TPMS sensor to the wheel when Monster Valve high-flow valve stems are installed, so the vehicle's tire pressure monitoring system continues to function normally. Without the bracket, the TPMS sensor can become unsecured when the factory valve stem is replaced.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this bracket work with aftermarket TPMS sensors?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Monster Valve TPMS Bracket fits most factory and aftermarket TPMS sensors, so it is generally compatible with replacement sensors as well as original equipment. Confirming that the specific aftermarket sensor matches the bracket's retention design before installation is recommended.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill this bracket work on a Japanese-market vehicle?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eJapanese vehicles may have TPMS sensor designs that are incompatible with the Monster Valve TPMS Bracket. Owners of Japanese-market vehicles should verify TPMS sensor compatibility before installing Monster Valves and may need an aftermarket TPMS sensor that is confirmed compatible with this bracket.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan Monster Valves be used as a secondary valve stem alongside the factory stem?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. When Monster Valves are used as a secondary valve stem added alongside the factory valve stem rather than replacing it, the TPMS sensor can remain on the factory stem, and the Monster Valve TPMS Bracket supports that configuration as well.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621689823302,"sku":"MON-7525","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/MonsterValvePart-TPMSBracket1.png?v=1791936457"},{"product_id":"power-tank-monster-valve-replacement-threaded-stem","title":"Power Tank Monster Valve Replacement Threaded Stem","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Monster Valve Replacement Threaded Stem is a hollow stainless steel stem that screws into the bottom of an existing Monster Valve body, available in three lengths to suit different wheel mounting configurations. These stems are intended only for modifying or customizing an already-installed Monster Valve, not as a standalone valve or a complete replacement unit. Short (20mm), Medium (36mm), and Long (41mm) lengths cover tap-mount, standard pre-drilled, and spacer-extended pre-drilled applications respectively.\u003c\/p\u003e\n\n\u003ch2\u003eThe Right Stem for the Right Mount\u003c\/h2\u003e\n\u003cp\u003eWheel mounting geometry varies enough between vehicles and wheel brands that a single stem length cannot cover every installation. The Short 20mm stem is designed for tap mounting and uses a flat seal, which seats flush against a tapped hole without a pre-drilled valve stem bore. The Medium 36mm stem is the standard length for the MV-FLAT2 Monster Valve and works in pre-drilled valve stem holes with no spacer or a 6mm spacer, making it the most broadly applicable option for common wheel setups. Choosing the correct length before installation prevents seal misalignment and ensures the Monster Valve body sits properly against the wheel.\u003c\/p\u003e\n\n\u003ch2\u003eStainless Steel Construction\u003c\/h2\u003e\n\u003cp\u003eEach stem is machined from stainless steel with 3\/16-24 threads, matching the thread specification of the Monster Valve body. Stainless steel resists the corrosion that comes with exposure to road salt, mud, and repeated airing-down cycles. This matters for a component that lives inside a wheel and is subject to pressure cycling every time a tire is inflated or deflated.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThree lengths available:\u003c\/strong\u003e Short 20mm, Medium 36mm, and Long 41mm to match different wheel mounting configurations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e 3\/16-24 threads machined to match Monster Valve body specifications\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeal compatibility stated per length:\u003c\/strong\u003e Short uses a flat seal; Medium and Long use a mushroom seal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpacer compatibility:\u003c\/strong\u003e Medium works with no spacer or a 6mm spacer; Long works with a 6mm or 12mm spacer in pre-drilled holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eShort\u003c\/th\u003e\n      \u003cth\u003eMedium\u003c\/th\u003e\n      \u003cth\u003eLong\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eMON-7522\u003c\/td\u003e\n      \u003ctd\u003eMON-7523\u003c\/td\u003e\n      \u003ctd\u003eMON-7526\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLength\u003c\/td\u003e\n      \u003ctd\u003e20mm\u003c\/td\u003e\n      \u003ctd\u003e36mm\u003c\/td\u003e\n      \u003ctd\u003e41mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThread Specification\u003c\/td\u003e\n      \u003ctd\u003e3\/16-24\u003c\/td\u003e\n      \u003ctd\u003e3\/16-24\u003c\/td\u003e\n      \u003ctd\u003e3\/16-24\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eStainless Steel\u003c\/td\u003e\n      \u003ctd\u003eStainless Steel\u003c\/td\u003e\n      \u003ctd\u003eStainless Steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSeal Type Required\u003c\/td\u003e\n      \u003ctd\u003eFlat seal\u003c\/td\u003e\n      \u003ctd\u003eMushroom seal\u003c\/td\u003e\n      \u003ctd\u003eMushroom seal\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting Application\u003c\/td\u003e\n      \u003ctd\u003eTap mounting\u003c\/td\u003e\n      \u003ctd\u003eMV-FLAT2; no spacer or 6mm spacer in pre-drilled holes\u003c\/td\u003e\n      \u003ctd\u003e6mm or 12mm spacer in pre-drilled holes\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese threaded stems suit Monster Valve owners who need to modify or customize their valve setup for a specific wheel mounting configuration, particularly those switching between tap-mount and pre-drilled-hole installations or adding spacers to accommodate wheel thickness.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese stems are not a complete Monster Valve and will not function without an existing Monster Valve body. The Long 41mm stem is a custom order only and may not be available for immediate shipment. The required flat or mushroom seal is not included and must be sourced separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich stem length should I choose for a standard Monster Valve installation?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Medium 36mm stem is the standard length for the MV-FLAT2 Monster Valve and fits pre-drilled valve stem holes with no spacer or a 6mm spacer. For tap-mount applications, the Short 20mm stem with a flat seal is the correct choice. The Long 41mm stem is a custom-order option for pre-drilled holes requiring a 6mm or 12mm spacer.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo these stems include the seal needed for installation?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank Monster Valve Replacement Threaded Stems do not include seals. The Short 20mm stem requires a flat seal; the Medium 36mm and Long 41mm stems each require a mushroom seal. Seals must be sourced separately before installation.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat thread specification do these stems use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eAll three Monster Valve Replacement Threaded Stem lengths use 3\/16-24 stainless steel threads, which match the thread specification of the Monster Valve body. This thread size is specific to the Monster Valve system and is not a universal valve stem thread.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan these stems be used without an existing Monster Valve body?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Monster Valve Replacement Threaded Stems screw into the bottom of an existing Monster Valve body and are not functional as standalone components. They are intended only for modifying or customizing a Monster Valve that is already installed or being rebuilt.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Short - 20mm","offer_id":50621690806342,"sku":"MON-7522","price":7.99,"currency_code":"USD","in_stock":true},{"title":"Medium - 36mm","offer_id":50621690839110,"sku":"MON-7523","price":7.99,"currency_code":"USD","in_stock":true},{"title":"Long - 41mm","offer_id":50621690871878,"sku":"MON-7526","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/MonsterValvePart-ShortStem.png?v=1791936517"},{"product_id":"power-tank-hippo3-hi-pressure-push-on-tire-chuck","title":"Power Tank HiPPO3 Hi-Pressure Push-On Tire Chuck","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank HiPPO3 is a third-generation hi-pressure push-on tire chuck rated to 1,000 psi working pressure, designed to seat quickly on Schrader valve stems as short as 7mm, including short TPMS metal stems and Apex RPV stems that most chucks cannot reach. At 3\/4 inch in diameter with a slim, short-depth profile, the HiPPO3 fits into tight wheel wells and crowded hub areas where a bulkier chuck would bind or miss the stem entirely.\u003c\/p\u003e\n\n\u003ch2\u003eGloved-Hand Control in Any Conditions\u003c\/h2\u003e\n\u003cp\u003eThe defining upgrade in the HiPPO3 over its predecessor is the EZ Grip Flange. Clipping a chuck onto a valve stem with numb fingers or insulated gloves is one of those small tasks that becomes genuinely frustrating at altitude or in cold weather. The EZ Grip Flange gives your fingers a positive purchase on the body so the chuck seats and releases cleanly on the first attempt. For anyone airing up after a cold-morning trail run or a winter recovery, that tactile control matters more than it sounds.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Short, Hard-to-Reach Stems\u003c\/h2\u003e\n\u003cp\u003eThe HiPPO3's slim profile and short engagement depth were carried forward from Version 2 specifically to handle the valve stems that cause problems: short TPMS metal stems that sit nearly flush with the wheel face, Apex RPV stems, and any stem recessed behind a wheel's spoke pattern or hub lip. The chuck works with any Schrader valve, so it covers standard stems as well, but its real value is on the fitments where other chucks fail to connect or require awkward angles to hold pressure.\u003c\/p\u003e\n\n\u003ch2\u003eReady to Connect to Ventoso Gauges and Industrial Couplers\u003c\/h2\u003e\n\u003cp\u003eThe HiPPO3 ships with a pre-installed 1\/4\" industrial plug, which means it clips directly into any Ventoso RED Tire Inflator Gauge or standard Industrial Female Coupler without an adapter. The chuck body carries 1\/8\" female NPT threads, the included elbow has 1\/8\" male and 1\/4\" female NPT threads, and the industrial plug has 1\/4\" male NPT threads. These standard NPT sizes make it straightforward to reconfigure the connection for different hose or gauge setups already in a kit.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEZ Grip Flange:\u003c\/strong\u003e new in Version 3, improves clip-on and clip-off control with gloves or in cold conditions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1,000 psi working pressure:\u003c\/strong\u003e rated for high-pressure CO2 and compressed-air inflation systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShort-stem compatibility:\u003c\/strong\u003e fits Schrader valves as short as 7mm, including TPMS metal stems and Apex RPV stems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlim, short-depth profile:\u003c\/strong\u003e reaches hard-to-access stems in tight wheel and hub areas\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePre-installed 1\/4\" industrial plug:\u003c\/strong\u003e connects directly to Ventoso RED gauges and Industrial Female Couplers out of the box\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull NPT thread spec:\u003c\/strong\u003e 1\/8\" female NPT on chuck body; elbow is 1\/8\" male and 1\/4\" female NPT; plug is 1\/4\" male NPT\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWorking Pressure\u003c\/td\u003e\n      \u003ctd\u003e1,000 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eChuck Diameter\u003c\/td\u003e\n      \u003ctd\u003e3\/4 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMinimum Valve Stem Length\u003c\/td\u003e\n      \u003ctd\u003e7mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eValve Compatibility\u003c\/td\u003e\n      \u003ctd\u003eAny Schrader valve (including short TPMS metal stems, Apex RPV stems)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eChuck Body Threads\u003c\/td\u003e\n      \u003ctd\u003e1\/8\" female NPT\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eElbow Threads\u003c\/td\u003e\n      \u003ctd\u003e1\/8\" male NPT (in) \/ 1\/4\" female NPT (out)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIndustrial Plug Threads\u003c\/td\u003e\n      \u003ctd\u003e1\/4\" male NPT\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.2 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eCHK-4020\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe HiPPO3 suits overlanders, off-road drivers, and anyone running a CO2 or compressed-air inflation system who needs a reliable push-on chuck for short, recessed, or hard-to-reach Schrader valve stems, particularly those using Ventoso RED Tire Inflator Gauges or Industrial Female Couplers or working in cold conditions where gloved-hand operation matters.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe HiPPO3 is an open chuck and cannot be connected directly to an air source without an inline switch, trigger, or on\/off valve in the line. It is not a no-air-loss chuck and is not suitable for inflating shocks or other low-volume, precision-fill applications.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat valve stems does the HiPPO3 fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank HiPPO3 push-on tire chuck works with any Schrader valve stem, including short TPMS metal valve stems, Apex RPV stems, and hard-to-access stems. The minimum stem length the chuck can engage is 7mm, and the chuck body is 3\/4 inch in diameter to clear tight hub and wheel-face clearances.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow does the HiPPO3 connect to a Ventoso gauge or air coupler?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe HiPPO3 ships with a pre-installed 1\/4\" industrial plug that clips directly into any Ventoso RED Tire Inflator Gauge or standard Industrial Female Coupler. No additional adapter is needed for those connections. The chuck body has 1\/8\" female NPT threads, and the included elbow has 1\/8\" male and 1\/4\" female NPT threads for other hose or gauge configurations.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the HiPPO3 be connected directly to a CO2 tank or air compressor output?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The HiPPO3 is an open chuck, meaning air flows freely when it is seated on a valve stem. Connecting it directly to an air source without an inline switch, trigger, or on\/off valve in the line would result in uncontrolled airflow. Always use the HiPPO3 downstream of a regulator or gauge that includes a flow-control mechanism.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs the HiPPO3 suitable for inflating shocks or other low-volume applications?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The HiPPO3 is not a no-air-loss chuck and is not designed for shocks or other low-volume, precision-fill applications where air loss during connection and disconnection would affect the result. For shock inflation, a dedicated no-air-loss chuck is required.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat thread sizes does the HiPPO3 use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe HiPPO3 push-on tire chuck uses three thread sizes: the chuck body itself has 1\/8\" female NPT threads; the included elbow has 1\/8\" male NPT on the inlet and 1\/4\" female NPT on the outlet; and the pre-installed industrial plug has 1\/4\" male NPT threads. These are standard NPT sizes compatible with most inflation hose and gauge fittings.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621691887686,"sku":"CHK-4020","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/Hippo3_Tire_Chuck-Power-Tank.png?v=1791936586"},{"product_id":"power-tank-yellow-1-4-in-air-line-20-ft-for-ox-locker-air-lockers","title":"Power Tank Yellow 1\/4 in. Air Line 20 ft for OX Locker Air Lockers","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Yellow 1\/4 in. Air Line is a 20-foot roll of 1\/4 in. OD, 1\/8 in. ID tubing designed as a direct fit for OX Locker air lockers and any other air-powered equipment that uses standard 1\/4 in. push-in fittings.\u003c\/p\u003e\n\n\u003ch2\u003eReady to Connect, No Adapters Needed\u003c\/h2\u003e\n\u003cp\u003eThe 1\/4 in. OD diameter matches the push-in fitting standard that OX Locker air lockers are built around, so the line seats and seals without additional adapters or reducers. A direct-fit connection means less hardware to source, fewer potential leak points, and a cleaner install under the vehicle.\u003c\/p\u003e\n\n\u003ch2\u003e20 Feet of Routing Flexibility\u003c\/h2\u003e\n\u003cp\u003eAt 20 feet, this air line gives enough length to route from a CO2 tank or onboard air source to a locker actuator even in larger cab configurations or when the tank is mounted away from the axle. The yellow color makes the line easy to identify during installation and future service checks.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect push-in fit:\u003c\/strong\u003e Compatible with all standard 1\/4 in. push-in fittings\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOX Locker spec:\u003c\/strong\u003e Matches the 1\/4 in. air line diameter OX Locker air lockers require\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e20-foot length:\u003c\/strong\u003e Sufficient for most under-vehicle routing runs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-visibility yellow:\u003c\/strong\u003e Easy to identify during install and inspection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOuter Diameter\u003c\/td\u003e\n      \u003ctd\u003e1\/4 in.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInner Diameter\u003c\/td\u003e\n      \u003ctd\u003e1\/8 in.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLength\u003c\/td\u003e\n      \u003ctd\u003e20 ft\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColor\u003c\/td\u003e\n      \u003ctd\u003eYellow\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFitting Compatibility\u003c\/td\u003e\n      \u003ctd\u003e1\/4 in. push-in fittings\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eARL-HSE14\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis air line is the right choice for OX Locker air locker owners who need replacement tubing or additional length, and for builders routing air to any air-powered accessory that uses standard 1\/4 in. push-in fittings.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis line is not compatible with systems that require a different air line diameter. It is sold as bulk tubing only. Push-in fittings, locker actuators, and CO2 sources are not included.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill this air line work with my OX Locker?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. OX Locker air lockers use 1\/4 in. air line, and this Power Tank air line is 1\/4 in. OD with a direct fit for all standard 1\/4 in. push-in fittings, making it a compatible replacement or extension for OX Locker installations.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat are the exact dimensions of this air line?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThis Power Tank air line measures 1\/4 in. outer diameter and 1\/8 in. inner diameter, and comes in a 20-foot roll. That length is sufficient for most under-vehicle routing runs from an air source to a locker actuator.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan this tubing be used with equipment other than OX Lockers?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThis air line is compatible with any air-powered equipment that uses standard 1\/4 in. push-in fittings, not just OX Locker air lockers. Confirm your equipment's required air line diameter before ordering.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this come with fittings or connectors?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThis product is sold as a 20-foot roll of 1\/4 in. air line tubing only. Push-in fittings, connectors, and any air source hardware are not included and must be sourced separately.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621691953222,"sku":"ARL-HSE14","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/Untitled-1_13ccc199-d57e-47eb-b5b0-97d619aacd60.jpg?v=1791936597"},{"product_id":"power-tank-monster-valve-wheel-compatibility-fit-kit","title":"Power Tank Monster Valve Wheel Compatibility Fit Kit","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Monster Valve Fit Kit is a set of color-coded test parts that lets buyers confirm which Monster Valve style fits their specific wheels before committing to a full valve stem purchase. The kit includes components representing every Monster Valve version, and supports non-standard combinations for wheels with unique geometry.\u003c\/p\u003e\n\n\u003ch2\u003eKnow Before You Buy\u003c\/h2\u003e\n\u003cp\u003eWheel compatibility for high-flow valve stems is not universal. Wheels that appear identical can have different offsets, spacings, and bore dimensions that affect which Monster Valve style seats correctly. Testing fitment before ordering the full valve stem set eliminates the risk of receiving hardware that cannot be installed in a specific wheel.\u003c\/p\u003e\n\n\u003ch2\u003eOne Kit, Every Monster Valve Style\u003c\/h2\u003e\n\u003cp\u003eThe Fit Kit includes parts that represent every current Monster Valve version (Primary, LOCK, Flat2, Tap3, and Tap), so a buyer can work through all configurations in a single session. Non-standard combinations are also possible, which matters for wheels that fall outside typical fitment patterns. Each part is color-coded to make recording the correct configuration straightforward when placing the eventual Monster Valve order.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull version coverage:\u003c\/strong\u003e includes test parts for every Monster Valve style\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor-coded components:\u003c\/strong\u003e each part is color-coded to simplify identifying the correct configuration\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNon-standard combinations:\u003c\/strong\u003e supports outside-of-spec fitment testing for unique wheel geometries\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eMON-FK01\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.1 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBrand\u003c\/td\u003e\n      \u003ctd\u003ePower Tank\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Monster Valve Fit Kit suits any off-road or overlanding driver who wants to verify Monster Valve compatibility with their specific wheels before purchasing a full set of valve stems. It is particularly useful for owners of aftermarket wheels where fitment data is limited or unavailable.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Fit Kit does not include functional Monster Valve stems and cannot be used to inflate or deflate tires. It does not replace the Monster Valve purchase itself, and is not a standalone tire inflation tool.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill Monster Valves fit my wheel?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNot every wheel can be tested for compatibility in advance, and wheels that look the same may have different offsets and spacings. The Monster Valve Fit Kit addresses this directly, letting a buyer test multiple Monster Valve configurations in their actual wheel before committing to any one style.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWho installs Monster Valves?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003ePower Tank provides the tools and has simplified the installation process, including the tap-in style. If a buyer can confidently drill a hole, they can drill and tap for a Monster Valve. For those who prefer professional installation, a local independent off-road shop or fabrication business is a practical option.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eAre Monster Valves compatible with TPMS sensors?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eMonster Valves are compatible with TPMS. When installed as a secondary valve stem, the factory TPMS sensor stays on the existing Schrader stem. When installed as the only valve stem, Power Tank provides a TPMS bracket to reuse the factory sensor. Some vehicles may require an aftermarket TPMS sensor.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the Monster Valve warranty?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eMonster Valves carry a lifetime warranty and lifetime service coverage. Every component is rebuildable whether or not the issue falls within the warranty period. Buyers can contact Power Tank directly for support at any point in the product's life.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621695164486,"sku":"MON-FK01","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/CHA00718-1BRIGHT.jpg?v=1791936684"},{"product_id":"power-tank-sidearm-regulator-n2-bottle-adapter-cga-323-to-cga-580","title":"Power Tank Sidearm Regulator N2 Bottle Adapter CGA-323 to CGA-580","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Sidearm Regulator to N2 Bottle Adapter (SKU NIT-0051) adds male CGA-323 threads to a nitrogen bottle with a CGA-580 female valve, letting the Power Shot Sidearm Regulator connect to larger N2 bottles it was not originally designed to thread onto. The adapter ships at 0.5 lb and is sold as a standalone fitting.\u003c\/p\u003e\n\n\u003ch2\u003eRun a Larger N2 Bottle with Your Sidearm Regulator\u003c\/h2\u003e\n\u003cp\u003eThe Power Shot Sidearm Regulator is built around the CGA-323 thread standard used on Power Shot CO2\/N2 bottles and Shock Boss bottles. Larger nitrogen bottles use the CGA-580 valve standard instead, which means the regulator cannot thread on directly. This adapter bridges that gap, converting the CGA-580 female valve on the larger bottle to the CGA-323 male interface the Sidearm Regulator expects, with no additional fittings required.\u003c\/p\u003e\n\n\u003ch2\u003eAlready Included in Shock Boss and ORI Shock Boss Kits\u003c\/h2\u003e\n\u003cp\u003eThis adapter is included as a free upgrade in all new Shock Boss and ORI Shock Boss kits. Buyers who already own one of those kits may have this fitting on hand. The standalone listing exists for those who need a replacement, are building a custom nitrogen setup, or purchased an earlier kit before the upgrade was added.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCGA-580 to CGA-323 conversion:\u003c\/strong\u003e adds male CGA-323 threads to any N2 bottle with a CGA-580 female valve\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSidearm Regulator compatibility:\u003c\/strong\u003e allows the Power Shot Sidearm Regulator to mount on larger nitrogen bottles\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact and lightweight:\u003c\/strong\u003e ships at 0.5 lb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded in new kits:\u003c\/strong\u003e ships as a free upgrade with all new Shock Boss and ORI Shock Boss kits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eNIT-0051\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInlet thread (bottle side)\u003c\/td\u003e\n      \u003ctd\u003eCGA-580 female\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOutlet thread (regulator side)\u003c\/td\u003e\n      \u003ctd\u003eCGA-323 male\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight (as shipped)\u003c\/td\u003e\n      \u003ctd\u003e0.5 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis adapter suits nitrogen system users who own the Power Shot Sidearm Regulator and want to run it on a larger N2 bottle with a CGA-580 female valve (common in welding-gas and air-gas supply bottles used for shock inflation and tuning).\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis adapter does not fit N2 bottles with valve standards other than CGA-580 female. The Power Shot Sidearm Regulator is not included. Buyers whose Shock Boss or ORI Shock Boss kit was purchased new may already have this fitting.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does this adapter actually do?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank CGA-323 to CGA-580 adapter converts the CGA-580 female valve found on larger nitrogen bottles to the CGA-323 male thread that the Power Shot Sidearm Regulator requires. Without it, the Sidearm Regulator cannot thread onto a standard large-format N2 bottle.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhich regulator does this adapter work with?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThis adapter is designed for use with the Power Shot Sidearm Regulator, which is the regulator used on Power Shot CO2\/N2 bottles and Shock Boss nitrogen bottles. It allows that specific regulator to connect to larger N2 bottles with CGA-580 female valves.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this adapter come with the Sidearm Regulator?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Sidearm Regulator is not included with this adapter. This listing is for the adapter fitting only (SKU NIT-0051). The Sidearm Regulator is sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs this adapter already included in Shock Boss kits?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThis adapter is included as a free upgrade in all new Shock Boss and ORI Shock Boss kits from Power Tank. Buyers who purchased a new kit recently may already have it. This standalone listing is for those who need a replacement or are building a custom nitrogen setup.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat thread standards does this fitting convert?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe adapter accepts a CGA-580 female valve on the nitrogen bottle side and presents a CGA-323 male thread on the regulator side. CGA-580 is the standard valve used on large-format nitrogen and inert-gas bottles; CGA-323 is the standard used on Power Shot and Shock Boss bottles.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621696344134,"sku":"NIT-0051","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/NIT-0051HERO.jpg?v=1791936706"},{"product_id":"power-tank-quick-release-bracket-and-roll-bar-clamp-combo","title":"Power Tank Quick-Release Bracket and Roll Bar Clamp Combo","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Quick-Release Bracket and Roll Bar Clamp Combo bundles one billet aluminum quick-release bracket with two billet aluminum roll bar clamps, giving off-road builds a fast, secure mounting point for Power Shot bottles, CO2 jacks, fire extinguishers, or similar cylindrical gear. Shims in the kit cover roll bar diameters from 1.5 to 2.0 inches, making the combo compatible with a wide range of tube-framed interiors and cages.\u003c\/p\u003e\n\n\u003ch2\u003eDrop-In, Pull-Out Access\u003c\/h2\u003e\n\u003cp\u003eThe Quick-Release Bracket uses a pull-pin design with a high-visibility red lanyard and a stainless steel leash. That leash keeps the pin tethered to the bracket so it cannot be dropped in the dirt or left behind on the trail. Pulling the pin takes one hand and a second, which matters when you need a fire extinguisher or a CO2 bottle quickly rather than after a search for a lost fastener.\u003c\/p\u003e\n\n\u003ch2\u003eOne Bracket, Multiple Mounting Positions\u003c\/h2\u003e\n\u003cp\u003eEach Roll Bar Clamp carries dual 1\/4-20 threaded holes spaced 180 degrees apart. That spacing lets you bolt two Quick-Release Brackets back to back on the same clamp pair, doubling the carrying capacity without adding more clamps to the roll bar. The same threaded holes accept other 1\/4-20 accessories, so the clamps remain useful if your setup changes.\u003c\/p\u003e\n\n\u003ch2\u003eBillet Aluminum Built for the Elements\u003c\/h2\u003e\n\u003cp\u003eBoth the bracket and the clamps are machined from billet aluminum and finished with a black anodize coat. Anodizing bonds to the aluminum surface rather than sitting on top of it, resisting corrosion, UV degradation, and the abrasion that comes with regular trail use. The result is hardware that holds up in wet, muddy, and dusty conditions without the rust or flaking that affects painted steel alternatives.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBillet aluminum construction:\u003c\/strong\u003e bracket and clamps machined from solid aluminum stock, anodized black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePull-pin quick release:\u003c\/strong\u003e red lanyard with stainless steel leash keeps the pin secured to the bracket\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual 1\/4-20 threaded holes per clamp:\u003c\/strong\u003e holes spaced 180 degrees apart for single or dual bracket mounting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShim-adjustable roll bar fit:\u003c\/strong\u003e included shims cover 1.5, 1.75, 1.875, and 2.0 inch diameter roll bars\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo sets of hose clamps included:\u003c\/strong\u003e secure cylindrical items such as Power Shot bottles, CO2 jacks, or fire extinguishers to the bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eBillet aluminum, anodized black\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRoll Bar Compatibility\u003c\/td\u003e\n      \u003ctd\u003e1.5 in, 1.75 in, 1.875 in, 2.0 in diameter (via included shims)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eClamp Thread\u003c\/td\u003e\n      \u003ctd\u003e1\/4-20\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded\u003c\/td\u003e\n      \u003ctd\u003e1 Quick-Release Bracket, 2 Roll Bar Clamps, 2 sets of hose clamps, shims, pull pin with red lanyard and stainless steel leash\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis combo suits off-road and overland builds with an interior roll cage or roll bar in the 1.5 to 2.0 inch diameter range, where fast one-handed access to a mounted cylinder, extinguisher, or CO2 bottle is a priority. The dual-hole clamp design also works for builders who want to mount two brackets side by side on the same bar.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Roll Bar Clamps are sized for round tube between 1.5 and 2.0 inches in diameter; flat-surface or non-tubular mounting locations are not supported by this kit. No flat-mount or surface-mount adapter is included.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat can the Quick-Release Bracket hold?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank Quick-Release Bracket is designed to carry cylindrical items secured by the included hose clamps, including Power Shot CO2 bottles, CO2 jacks, and fire extinguishers. It also holds other similarly shaped cylindrical trail gear. The bracket does not specify a maximum load rating in the available product data.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat roll bar diameters does this kit fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Roll Bar Clamps in this combo include shims that allow mounting to roll bars measuring 1.5, 1.75, 1.875, or 2.0 inches in diameter. Roll bars outside that range are not compatible with the included hardware.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan I mount two brackets on the same roll bar clamps?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. Each Roll Bar Clamp has two 1\/4-20 threaded holes spaced 180 degrees apart specifically to allow dual bracket mounting. A second Quick-Release Bracket can be bolted to the opposite side of the same clamp pair without adding more clamps to the bar.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs the finish durable enough for outdoor and off-road use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eBoth the Quick-Release Bracket and the Roll Bar Clamps are machined from billet aluminum and finished with a black anodize coat. Anodizing is an electrochemical surface treatment that resists corrosion, UV exposure, and abrasion, making it well suited to outdoor and off-road environments.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621701357638,"sku":"BKT-3041","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/BKT-3041_HERO.jpg?v=1791936808"},{"product_id":"power-tank-quick-release-bracket-for-fire-extinguisher-and-co2-jack","title":"Power Tank Quick-Release Bracket for Fire Extinguisher and CO2 Jack","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Quick-Release Bracket is a 6061 billet aluminum mount that holds a 2.5 lb ABC dry chemical fire extinguisher and a Pro Eagle Phoenix CO2 jack in a single bracket. Machined to tight tolerances and finished with a matte anodized coating, it installs to flat surfaces, PALS\/MOLLE panels, roll cage tubes, or the side of a Power Tank 10 lb or 15 lb Super Bracket (BKT-2260 purchased 2021 or later).\u003c\/p\u003e\n\n\u003ch2\u003eOne-Handed Emergency Access\u003c\/h2\u003e\n\u003cp\u003eThe Quick-Release Bracket uses a pull-pin release with a bright red fabric pull attached to a steel lanyard. In an emergency, the pin stays tethered to the bracket so it cannot be lost, and the design allows a user to pull the pin and grab the extinguisher as two separate movements when only one hand is free. That combination of a high-visibility pull and a tethered pin reduces fumbling time when seconds matter on a trail.\u003c\/p\u003e\n\n\u003ch2\u003eVibration-Dampened Billet Construction\u003c\/h2\u003e\n\u003cp\u003eThe bracket is machined from 6061 billet aluminum with tight tolerances that minimize play between the extinguisher and the mount. Less play means less rattle over washboard roads and rocky terrain. After machining, each bracket is sandblasted and anodized in a matte, textured finish that resists corrosion and abrasion in the field.\u003c\/p\u003e\n\n\u003ch2\u003eFlexible Mounting for Any Rig Layout\u003c\/h2\u003e\n\u003cp\u003eThe Quick-Release Bracket flush-mounts to any flat surface using the included 1\/4-20 bolts, attaches to PALS or MOLLE panels with an optional backing plate, clamps to roll cage tubes from 1.5\" to 2.0\" diameter with optional roll bar clamps, or bolts directly to the side of a Power Tank Super Bracket (BKT-2260, 2021 or later). Two sets of hose clamps are included: one sized for the fire extinguisher (2.06\"–3.0\" ID) and one for the Pro Eagle Phoenix CO2 jack (2.56\"–3.5\" ID), so both can be staged in the same bracket without additional hardware.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6061 billet aluminum construction:\u003c\/strong\u003e sandblasted and anodized in a matte, textured finish (silver or black)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual hose clamp sets included:\u003c\/strong\u003e 2.06\"–3.0\" ID for the fire extinguisher and 2.56\"–3.5\" ID for the CO2 jack\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRed fabric pull pin on steel lanyard:\u003c\/strong\u003e high-visibility, tethered release for one- or two-handed operation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFour mounting options:\u003c\/strong\u003e flat surface, PALS\/MOLLE panel (optional backing plate), roll cage tube (optional roll bar clamps), or Power Tank Super Bracket BKT-2260 (2021 or later)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo 1\/4-20 bolts included\u003c\/strong\u003e for flat-surface installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003e6061 billet aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eSandblasted and anodized, matte textured (silver or black)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose clamp set 1 (fire extinguisher)\u003c\/td\u003e\n      \u003ctd\u003e2.06\"–3.0\" ID\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose clamp set 2 (CO2 jack)\u003c\/td\u003e\n      \u003ctd\u003e2.56\"–3.5\" ID\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded hardware\u003c\/td\u003e\n      \u003ctd\u003e(2) 1\/4-20 bolts, (2) sets of hose clamps\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible extinguisher size\u003c\/td\u003e\n      \u003ctd\u003e2.5 lb ABC dry chemical, 3\" diameter range\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible CO2 jack\u003c\/td\u003e\n      \u003ctd\u003ePro Eagle Phoenix CO2 jack\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSuper Bracket compatibility\u003c\/td\u003e\n      \u003ctd\u003ePower Tank BKT-2260 (purchased 2021 or later)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOptional accessories (sold separately)\u003c\/td\u003e\n      \u003ctd\u003eBacking plate (MOLLE\/PALS mount), roll bar clamps (1.5\", 1.75\", 1.875\", 2.0\" tubes)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eBKT-3031-BK\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Power Tank Quick-Release Bracket suits overlanders, 4x4 enthusiasts, and side-by-side riders who need a durable, quick-access mount for a 2.5 lb ABC dry chemical fire extinguisher (particularly those running organized group 4x4 events where a fire extinguisher is required) and who also carry a Pro Eagle Phoenix CO2 jack and want both staged in one accessible location.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe fire extinguisher and Pro Eagle Phoenix CO2 jack are sold separately and are not included. The bracket is designed for fire extinguishers in the 3\" diameter range; other extinguisher sizes are not supported. Mounting to a MOLLE panel requires the optional backing plate, and mounting to a roll cage requires the optional roll bar clamps. Neither accessory is included with the bracket.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat size fire extinguisher does this bracket fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank Quick-Release Bracket is designed for fire extinguishers in the 3\" diameter range. A 2.5 lb ABC dry chemical extinguisher is the recommended size. ABC dry chemical extinguishers address combustible, fluid, and electrical fire sources: the three types most relevant to a vehicle fire. The fire extinguisher is sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat mounting options are available, and what hardware is included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe bracket includes two 1\/4-20 bolts for flush-mounting to any flat surface. It also attaches to PALS or MOLLE panels using an optional backing plate (sold separately) and to roll cage tubes from 1.5\" to 2.0\" diameter using optional roll bar clamps (sold separately). It can also bolt to the side of a Power Tank Super Bracket (BKT-2260 purchased in 2021 or later) without additional hardware.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the fire extinguisher be released with one hand?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Quick-Release Bracket's pull-pin design allows the pin to be pulled and the extinguisher to be grabbed as two separate movements, so a user with only one hand available can still access it. The pull pin has a bright red fabric pull for visibility and is attached to a steel lanyard so it stays tethered to the bracket rather than being dropped or lost.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this bracket also hold a CO2 jack?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank Quick-Release Bracket includes a second set of hose clamps (2.56\"–3.5\" ID) sized for the Pro Eagle Phoenix CO2 jack, so both the fire extinguisher and the CO2 jack can be mounted in the same bracket. The Pro Eagle Phoenix CO2 jack is sold separately and is not included with the bracket.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621701980230,"sku":"BKT-3031-BK","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/BKT-3031-BK.jpg?v=1791936841"},{"product_id":"power-tank-big-kahuna-digital-ventoso-tire-inflator-gauge-with-6-ft-ho","title":"Power Tank Big Kahuna Digital Ventoso Tire Inflator Gauge with 6 ft. Hose","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Big Kahuna Digital is a high-flow, fully rebuildable tire inflator gauge built on the Ventoso body platform, rated to handle input pressures up to 400 psi and designed for overlanders, off-road drivers, and anyone who demands accurate, fast tire fills across every wheel type. It ships with a 6 ft. steel-braided safety hose and three quick-switch chucks, and is available with either a 1.5–60 psi or a 5–150 psi backlit digital gauge.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to Handle Real Pressure\u003c\/h2\u003e\n\u003cp\u003eThe Ventoso body at the core of the Big Kahuna Digital is pressure-cast to reduce porosity and increase structural integrity, then fitted with a brass piston and EPDM O-rings chosen specifically because they hold up under the elevated pressures (up to 400 psi) that a Power Tank CO2 system produces. That matters because standard inflator bodies and rubber seals can degrade or fail at those pressures, leaving you with a leaking tool mid-trail. The dual bleed buttons give precise control when bleeding air back down to target pressure, and the entire unit is hand-assembled from individually sourced components so every part can be replaced or upgraded rather than discarding the whole tool.\u003c\/p\u003e\n\n\u003ch2\u003eRead Accurately, Even in the Dark\u003c\/h2\u003e\n\u003cp\u003eThe Big Kahuna Digital uses a backlit digital gauge powered by AAA batteries, making pressure readings clear at night or in low-light conditions without a separate light source. Two gauge ranges are available: the 1.5–60 psi gauge reads to finer tolerances (+\/-0.6 psi accuracy) and suits most passenger, truck, and off-road tire pressures, while the 5–150 psi gauge covers a wider range at a slightly broader tolerance (+\/-1.5 psi), useful when inflating tires that run higher pressures. Choosing the right gauge range for your typical tire pressure means you get the most accurate reading for your specific use.\u003c\/p\u003e\n\n\u003ch2\u003eA Chuck for Every Wheel, Switched in Seconds\u003c\/h2\u003e\n\u003cp\u003eThree chucks are included and connect to the 6 ft. hose via a quick-release coupler, so switching between wheel types takes seconds rather than tools. The Hi-Pressure Push-On Chuck V2 (HiPPO2) is the general-purpose chuck: its shallower bite depth seats on shorter valve stems including metal TPMS and Apex Rapid Precision Valves, its narrower nose fits recessed valve stem holes found on many off-road wheels, and its ridged collar is grippable with gloves or in cold weather. It is rated to 1000 psi working pressure and is fully rebuildable. The dual-head angle-back chuck handles dually wheels, and the dual-head straight-back chuck works with Alcoa wheels and motorcycle spoked wheels.\u003c\/p\u003e\n\n\u003ch2\u003eSafety Hose That Lets You Stand Clear\u003c\/h2\u003e\n\u003cp\u003eThe 6 ft. steel-braided Safety Series whip is long enough to let the user stand fully upright and to the side of the tire during inflation. That distance is meaningful: at the pressures a CO2 system delivers, a tire or wheel failure during inflation can be dangerous, and standing clear reduces exposure. The steel braid also resists abrasion and kinking on rocky or rough surfaces where a standard rubber hose would wear quickly.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual bleed buttons:\u003c\/strong\u003e ergonomic handle with two XL bleed buttons for fast, accurate pressure adjustment\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacklit digital gauge:\u003c\/strong\u003e choice of 1.5–60 psi (+\/-0.6 psi) or 5–150 psi (+\/-1.5 psi); AAA battery powered\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThree quick-switch chucks:\u003c\/strong\u003e HiPPO2 push-on, dual-head angle-back, and dual-head straight-back, all via quick-release coupler\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6 ft. steel-braided safety whip:\u003c\/strong\u003e Safety Series hose rated for high-pressure use\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFully rebuildable:\u003c\/strong\u003e brass piston, EPDM O-rings, and hand-assembled construction designed for long-term serviceability\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFive-year warranty:\u003c\/strong\u003e covers components under normal use; gauges are excluded from warranty coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eGauge range options\u003c\/td\u003e\n      \u003ctd\u003e1.5–60 psi or 5–150 psi (choose at purchase)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eGauge accuracy\u003c\/td\u003e\n      \u003ctd\u003e+\/-0.6 psi (60 psi gauge) \/ +\/-1.5 psi (150 psi gauge)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eGauge display\u003c\/td\u003e\n      \u003ctd\u003eBacklit digital; AAA battery powered\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMax input pressure\u003c\/td\u003e\n      \u003ctd\u003e400 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eChuck working pressure\u003c\/td\u003e\n      \u003ctd\u003e1000 psi (HiPPO2)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose\u003c\/td\u003e\n      \u003ctd\u003e6 ft. steel-braided Safety Series whip\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eChucks included\u003c\/td\u003e\n      \u003ctd\u003eHiPPO2 push-on, dual-head angle-back, dual-head straight-back\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBody material\u003c\/td\u003e\n      \u003ctd\u003ePressure-cast; brass piston; EPDM O-rings\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e2 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCase options\u003c\/td\u003e\n      \u003ctd\u003eSand Flat Bag (standard) or Ventoso RED Hard Case v2 (with divider)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWarranty\u003c\/td\u003e\n      \u003ctd\u003eFive years on components; gauges excluded\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Big Kahuna Digital suits overlanders, off-road drivers, and anyone running a high-pressure CO2 air system who needs a capable, accurate inflator that works across standard passenger tires, truck tires, dually wheels, Alcoa wheels, and motorcycle wheels. It also works with standard air compressors for everyday use.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis product is a tire inflator gauge and hose assembly only. It does not include a CO2 tank, regulator, or air source. The gauge is not covered under the five-year warranty. A 2 ft. hose extension for additional stand-off distance is sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill the Big Kahuna Digital work with a standard air compressor, not just a Power Tank CO2 system?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Big Kahuna Digital tire inflator is compatible with any air source. It is not proprietary to Power Tank CO2 systems. The Ventoso body and EPDM O-rings are built to handle input pressures up to 400 psi, which exceeds what most compressors produce, so the inflator works reliably across a wide range of air sources.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between the 60 psi and 150 psi gauge options?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Big Kahuna Digital is available with two gauge ranges. The 1.5–60 psi gauge reads to +\/-0.6 psi accuracy and is well suited to most off-road, truck, and passenger tire pressures. The 5–150 psi gauge covers a wider range at +\/-1.5 psi accuracy, which is useful for tires that run higher pressures. Both gauges are backlit digital displays powered by AAA batteries.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat chucks are included and which wheel types do they cover?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThree chucks are included with the Big Kahuna Digital: the HiPPO2 Hi-Pressure Push-On chuck for general use including metal TPMS and recessed valve stems on off-road wheels, a dual-head angle-back chuck for dually wheels, and a dual-head straight-back chuck for Alcoa wheels and motorcycle spoked wheels. All three connect to the hose via a quick-release coupler and can be swapped in seconds.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does \"fully rebuildable\" mean for the Big Kahuna Digital?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Big Kahuna Digital tire inflator is hand-assembled from individually sourced components: the brass piston, EPDM O-rings, chucks, and hose are all serviceable and replaceable parts rather than a sealed unit. When a component wears or fails, it can be replaced individually rather than replacing the entire inflator, which extends the useful life of the tool significantly.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the warranty cover, and are the gauges included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Big Kahuna Digital carries a five-year warranty covering components that fail under normal use. Gauges are explicitly excluded from warranty coverage. After five years, or when a purchase date cannot be confirmed, replacement components are available at a reduced cost and repair services are offered.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between the Sand Flat Bag and the Ventoso RED Hard Case v2?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Big Kahuna Digital ships standard with a Sand Flat Bag for storage and transport. The Ventoso RED Hard Case v2 is a rigid protective case with an internal divider that keeps the inflator body separated from the hose and chucks, offering more protection for storage in a vehicle or gear locker. Both options contain the same inflator, hose, and chucks.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Sand Flat Bag (standard)","offer_id":50621704929350,"sku":"TIG-9340","price":169.99,"currency_code":"USD","in_stock":true},{"title":"Ventoso RED Hard Case v2","offer_id":50621704962118,"sku":"TIG-9340-CASE","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/Big-Kahuna-sq.jpg?v=1791937012"},{"product_id":"power-tank-monster-valve-flat2-high-flow-valve-stem-for-kmc-beadlock-w","title":"Power Tank Monster Valve Flat2 High-Flow Valve Stem for KMC Beadlock Wheels","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Monster Valve Flat2 is a single oversized, high-flow aluminum valve stem designed to install as a second stem in KMC Beadlock wheels with dual valve stem ports, enabling dramatically faster tire deflation and inflation than a standard Schrader valve. At 1.1 oz per valve and 5 times the stiffness of a standard metal valve stem, the Flat2 adds speed without adding meaningful weight or requiring tire rebalancing after installation. This listing is a single spare valve and does not include the Monster Key installation tool or a Monster Chuck.\u003c\/p\u003e\n\n\u003ch2\u003eFaster Air-Down, Faster Air-Up\u003c\/h2\u003e\n\u003cp\u003eThe Monster Valve Flat2's oversized bore moves air at a rate that a standard Schrader valve cannot match. A 40x13.5x17-inch tire airs down from 35 psi to 10 psi in under 30 seconds. When paired with a Power Tank CO2 system and Monster Chuck (each sold separately), that same tire can be reinflated in 50 to 60 seconds. For overlanders who air down and back up at every trail head, that time savings adds up across a full day of driving.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to Last Without Rebalancing\u003c\/h2\u003e\n\u003cp\u003eThe Monster Valve Flat2 is machined from 7018 aluminum with an aluminum collar and aluminum dust cap, keeping each valve to 1.1 oz, light enough that no tire rebalancing is needed after installation. The aluminum construction is 5 times stiffer than a standard metal valve stem, resisting the flex and fatigue that can cause conventional stems to leak or fail under repeated airing cycles. A lifetime warranty covers the valve, and every Monster Valve is designed to be fully rebuildable.\u003c\/p\u003e\n\n\u003ch2\u003eDesigned for KMC Beadlock Dual-Valve Wheels\u003c\/h2\u003e\n\u003cp\u003eThe Flat2 mounts in the second valve stem port found on KMC Beadlock wheels, leaving the original Schrader stem in place, so any factory TPMS sensor stays on the existing stem and continues to function. Installation requires removing the tire from the wheel first; the Monster Key installation tool (sold separately) is required for a complete install. Owners of KMC Grenade wheels need one additional Long Stem and one 12mm Spacer per valve (both sold separately) for proper fitment.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e7018 Aluminum Body:\u003c\/strong\u003e oversized bore for high-flow air-down and air-up\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAluminum Collar and Dust Cap:\u003c\/strong\u003e full aluminum construction at 1.1 oz per valve\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo Rebalancing Required:\u003c\/strong\u003e light enough that tire balance is unaffected after installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e5x Stiffer Than Standard Metal Valve:\u003c\/strong\u003e resists flex and fatigue through repeated airing cycles\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTPMS Compatible:\u003c\/strong\u003e installs as a second stem, leaving the factory TPMS sensor on the original Schrader valve\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLifetime Warranty:\u003c\/strong\u003e fully rebuildable design backed by Power Tank's lifetime service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBody Material\u003c\/td\u003e\n      \u003ctd\u003e7018 Aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCollar Material\u003c\/td\u003e\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDust Cap Material\u003c\/td\u003e\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight Per Valve\u003c\/td\u003e\n      \u003ctd\u003e1.1 oz\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWheel Compatibility\u003c\/td\u003e\n      \u003ctd\u003eKMC Beadlock wheels with dual valve stem ports\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eKMC Grenade Additional Parts\u003c\/td\u003e\n      \u003ctd\u003eLong Stem + 12mm Spacer required per valve (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWarranty\u003c\/td\u003e\n      \u003ctd\u003eLifetime (void if used with balancing beads)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eMON-8620\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Monster Valve Flat2 suits overlanders and off-road drivers running KMC Beadlock wheels with dual valve stem ports who want the fastest possible air-down and air-up times at the trail head. It is also the right choice as a spare or replacement for anyone who already owns Monster Valve Flat2 stems and needs an additional single unit.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Flat2 does not fit wheels without a second valve stem port, and it is not a complete installation kit: the Monster Key tool and Monster Chuck are not included and must be purchased separately. KMC Grenade wheel owners require an additional Long Stem and 12mm Spacer per valve, also sold separately. The warranty is void if the valve is used with balancing beads.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich wheels does the Monster Valve Flat2 fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Monster Valve Flat2 is designed for KMC Beadlock wheels that have a second, dual valve stem port. It does not fit standard single-port wheels. Owners of KMC Grenade wheels need one additional Long Stem and one 12mm Spacer per Monster Valve Flat2 for proper fitment; both are sold separately. Power Tank offers a Monster Valve Fit Kit to test compatibility before committing to a full set.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included with this single valve, and what is not?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThis listing contains one Monster Valve Flat2 stem, a spare or additional unit. The Monster Key installation tool and the Monster Chuck air chuck are not included and must be purchased separately. A complete first-time installation also requires removing the tire from the wheel before fitting the valve stem.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow fast does the Monster Valve Flat2 air down a tire?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Monster Valve Flat2 can air down a 40x13.5x17-inch tire from 35 psi to 10 psi in under 30 seconds. When a Monster Chuck and a Power Tank CO2 system (both sold separately) are used to reinflate, that same tire can be brought back up in 50 to 60 seconds. These figures come from Power Tank's own product data for this valve.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Monster Valve Flat2 work with factory TPMS sensors?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. Because the Flat2 installs as a second valve stem alongside the existing Schrader stem, the factory TPMS sensor remains on the original stem and continues to function normally. No TPMS relocation or replacement is required for a dual-stem installation on a compatible KMC Beadlock wheel.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes installing the Monster Valve Flat2 require tire rebalancing?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo rebalancing is required. Each Monster Valve Flat2 weighs 1.1 oz, light enough that it does not affect tire balance after installation. Note that the warranty is void if the valve is used alongside balancing beads.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621707321414,"sku":"MON-8620","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/MV_2_HERO.jpg?v=1791937139"},{"product_id":"power-tank-monster-valve-primary-standard-mount-high-flow-stem","title":"Power Tank Monster Valve Primary Standard Mount High-Flow Stem","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Monster Valve Primary (MV-P) is a high-flow aluminum valve stem designed to replace a standard Schrader valve in any standard valve stem hole without modifying the wheel. Weighing 1.1 oz per valve and built from 7018 aluminum, the MV-P can air down a 40x13.5x17-inch tire from 35 psi to 10 psi in under 30 seconds, and inflate that same tire in 40 seconds when paired with a Power Tank CO2 system. This listing is for a single Monster Valve Primary unit.\u003c\/p\u003e\n\n\u003ch2\u003eSpeed That Changes How You Air Down\u003c\/h2\u003e\n\u003cp\u003eThe Monster Valve Primary's high-flow design moves air at a rate comparable to four standard Schrader valves simultaneously. For overlanders running large-diameter tires, that difference is immediate: airing down a full set before a trail section takes minutes instead of the better part of an hour. The re-engineered red air-down collar is more ergonomic than the previous design, making the process faster and less fiddly at the trailhead.\u003c\/p\u003e\n\n\u003ch2\u003eNo Wheel Modification, No Rebalancing\u003c\/h2\u003e\n\u003cp\u003eThe Monster Valve Primary installs into a standard valve stem hole using a 30-degree bracket, secured with a nut, washer, and rubber grommet. Because no drilling or tapping is required, the wheel is not permanently altered. At 1.1 oz per valve, the MV-P is light enough that tire rebalancing is not required after installation. The aluminum construction is five times stiffer than a standard metal valve stem, which means the valve body can absorb trail impacts, including a wheel deflecting off a boulder, without damage.\u003c\/p\u003e\n\n\u003ch2\u003eTPMS Retention Built In\u003c\/h2\u003e\n\u003cp\u003eThe included TPMS bracket lets you reuse factory or aftermarket TPMS sensors when the Monster Valve Primary is your only valve stem. This matters for daily-driven vehicles where TPMS warning lights are a real concern: the bracket holds the sensor in position without requiring a separate Schrader valve alongside the MV-P. Note that Japanese vehicles may have TPMS incompatibility with the included bracket; an aftermarket TPMS sensor may be required.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e7018 aluminum body and collar:\u003c\/strong\u003e lightweight at 1.1 oz per valve, five times stiffer than a standard metal valve stem\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard valve stem hole fitment:\u003c\/strong\u003e installs with a 30-degree bracket, nut, washer, and rubber grommet (no wheel drilling or modification required)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRe-engineered red air-down collar:\u003c\/strong\u003e redesigned for improved ergonomics and ease of use\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Monster Chuck:\u003c\/strong\u003e compatible with Power Tank Tire Inflator Gauges equipped with a RED Quick-Switch Coupler, including Switch-Hitter and Big Kahuna models\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded TPMS bracket:\u003c\/strong\u003e retains factory or aftermarket TPMS sensors when the MV-P is the sole valve stem\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLifetime warranty:\u003c\/strong\u003e covers the valve with full rebuild support; warranty is void if used with balancing beads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBody material\u003c\/td\u003e\n      \u003ctd\u003e7018 aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCollar material\u003c\/td\u003e\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eValve weight\u003c\/td\u003e\n      \u003ctd\u003e1.1 oz\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting style\u003c\/td\u003e\n      \u003ctd\u003eStandard valve stem hole, 30-degree bracket\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAir-down performance\u003c\/td\u003e\n      \u003ctd\u003e40x13.5x17-inch tire, 35 psi to 10 psi in under 30 seconds\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInflation performance\u003c\/td\u003e\n      \u003ctd\u003e40x13.5x17-inch tire in 40 seconds (with Power Tank CO2 system)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded hardware\u003c\/td\u003e\n      \u003ctd\u003eMonster Chuck, TPMS bracket, 30-degree bracket, nut, washer, rubber grommet\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMonster Chuck compatibility\u003c\/td\u003e\n      \u003ctd\u003ePower Tank Tire Inflator Gauges with RED Quick-Switch Coupler; Switch-Hitter and Big Kahuna models\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWarranty\u003c\/td\u003e\n      \u003ctd\u003eLifetime (void if used with balancing beads)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eMON-8920\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Monster Valve Primary suits overlanders and off-road drivers running large-format tires who want the fastest possible air-down and air-up times from a single valve stem. It is a strong fit for any wheel with a standard valve stem hole where the 30-degree bracket clears the wheel face, and for daily-driven vehicles where retaining TPMS function matters.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eWheel fitment is not guaranteed for all wheel designs: recessed valve stem holes, bead lock rings, faux lock rings, and certain wheel geometries can cause interference with the 30-degree bracket. The Monster Chuck included in this kit works only with Power Tank Tire Inflator Gauges equipped with a RED Quick-Switch Coupler; it is not compatible with standard chuck fittings or non-Power Tank inflators. This listing is a single valve; it does not include a Ventoso RED Tire Inflator Gauge, which is sold separately. The warranty is void if the valve is used with balancing beads. Japanese vehicles may require an aftermarket TPMS sensor for full TPMS compatibility.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Monster Valve Primary require drilling or modifying the wheel?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Monster Valve Primary installs into an existing standard valve stem hole using a 30-degree bracket, nut, washer, and rubber grommet. No drilling, tapping, or permanent wheel modification is required. However, wheel fitment is not guaranteed for all designs: recessed holes, bead lock rings, faux lock rings, and certain wheel geometries can prevent the bracket from seating correctly.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included with a single Monster Valve Primary?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach single Monster Valve Primary (SKU MON-8920) includes the MV-P valve stem, a 30-degree mounting bracket, a nut, a washer, a rubber grommet, a TPMS bracket, and a Monster Chuck. The Ventoso RED Tire Inflator Gauge is not included and is sold separately. A RED Quick-Switch Coupler on a Power Tank Tire Inflator Gauge is required to use the Monster Chuck.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill the Monster Valve Primary work with my existing TPMS sensors?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Monster Valve Primary includes a TPMS bracket designed to retain factory or aftermarket TPMS sensors when the MV-P is the only valve stem on the wheel. Most vehicles are compatible, but Japanese vehicles may experience TPMS incompatibility with the included bracket and may require an aftermarket TPMS sensor to restore full TPMS function.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Power Tank inflator gauges work with the included Monster Chuck?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Monster Chuck included with the Monster Valve Primary is compatible with Power Tank Tire Inflator Gauges that have a RED Quick-Switch Coupler. This includes current Ventoso RED models and previous-generation Switch-Hitter and Big Kahuna models. Any Power Tank Tire Inflator Gauge without a RED Quick-Switch Coupler can be upgraded with the RED Upgrade Kit, sold separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes installing the Monster Valve Primary require tire rebalancing?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eAt 1.1 oz per valve, the Monster Valve Primary does not require tire rebalancing after installation. The all-aluminum construction also means the valve does not add meaningful rotational mass compared to a standard metal valve stem.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621709353030,"sku":"MON-8920","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/MV_3_HERO_dd040743-219e-4e40-b309-702dd587ea73.jpg?v=1791937212"},{"product_id":"power-tank-ventoso-red-2-ft-stand-away-hose-extension","title":"Power Tank Ventoso RED 2 ft Stand Away Hose Extension","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Ventoso RED 2 ft Hose Extension adds two feet of working distance between a user and the tire chuck during high-pressure inflation (80 psi and above) or when airing up a tire that may be damaged. It connects to the Ventoso RED Hose Whip and is compatible with any Ventoso RED modular setup. Multiple extensions can be run in-line for additional standoff distance.\u003c\/p\u003e\n\n\u003ch2\u003eExtra Distance Where It Counts\u003c\/h2\u003e\n\u003cp\u003eWhen a tire is inflated above 80 psi or its condition is uncertain, the extra two feet this extension provides keeps hands and face farther from the valve stem and chuck. That distance is the entire point of the product. A small addition to the hose run meaningfully changes where a person stands relative to a potential blowout or chuck failure. The extension snaps into the existing Ventoso RED Hose Whip without tools or reconfiguration.\u003c\/p\u003e\n\n\u003ch2\u003eModular by Design\u003c\/h2\u003e\n\u003cp\u003eThe Ventoso RED system is built around individual components that connect and stack. Because this hose extension uses the same in-line connection as the rest of the RED lineup, two or more extensions can be added together when the situation calls for even greater standoff. No adapters or separate fittings are needed beyond what the Ventoso RED system already uses.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2 ft length:\u003c\/strong\u003e adds two feet of hose between the Ventoso RED Hose Whip and the tire chuck\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStand Away Safety:\u003c\/strong\u003e designed for use with high-pressure tires (80 psi+) or tires that may be damaged\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIn-line stackable:\u003c\/strong\u003e multiple extensions can be connected in series for greater standoff distance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVentoso RED compatible:\u003c\/strong\u003e connects directly to the Ventoso RED Hose Whip\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLength\u003c\/td\u003e\n      \u003ctd\u003e2 ft\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.5 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eTIG-25HS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible System\u003c\/td\u003e\n      \u003ctd\u003eVentoso RED Hose Whip\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Power Tank Ventoso RED 2 ft Hose Extension is for overlanders, off-road drivers, and tire technicians who regularly air up high-pressure tires (80 psi and above) or work with tires whose condition is uncertain and want additional distance from the chuck during inflation. It suits anyone already running a Ventoso RED modular inflator setup who wants to extend their hose run.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis extension requires a Ventoso RED Hose Whip to function. It is not a standalone inflator, gauge, or chuck, and it does not include any of those components. It is not designed for use outside the Ventoso RED modular system.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does this extension actually connect to?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank Ventoso RED 2 ft Hose Extension connects to the Ventoso RED Hose Whip. It adds two feet of hose between the Whip and the tire chuck. It is not compatible with non-RED Ventoso components and does not include a chuck, gauge, or coupler. Those remain part of the existing Ventoso RED setup.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan I use more than one extension at a time?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. Multiple Ventoso RED 2 ft Hose Extensions can be connected in-line, one after another, for greater standoff distance from the tire. Each extension adds two feet to the total hose run. No additional adapters are required beyond the extensions themselves.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhy would I need extra hose length during inflation?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Ventoso RED 2 ft Hose Extension is designed for situations where extra distance from the tire is a safety consideration: specifically when inflating tires to 80 psi or above, or when a tire's condition is uncertain. The added length keeps the user farther from the valve stem and chuck during the inflation process.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this extension require any tools to install?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Ventoso RED 2 ft Hose Extension connects to the Ventoso RED Hose Whip using the same in-line connection the RED modular system already uses. No separate tools or fittings are stated as required for the connection.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621710204998,"sku":"TIG-25HS","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/TIG-25HSPNG.jpg?v=1791937239"},{"product_id":"power-tank-monster-valve-tap3-single-high-flow-tire-valve-stem","title":"Power Tank Monster Valve Tap3 Single High-Flow Tire Valve Stem","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Monster Valve Tap3 is a single 3\/8-24 straight-thread high-flow valve stem machined from 7018 aluminum for installation into steel or aluminum wheels as a primary or secondary valve stem. Weighing just 1.1 oz, it enables rapid tire deflation and inflation without requiring tire removal from the rim. This listing is a spare or replacement unit and does not include the 'Q' drill bit, 3\/8-24 tap, installation key, or Monster Chuck.\u003c\/p\u003e\n\n\u003ch2\u003eHigh-Flow Design That Outpaces Standard Valve Stems\u003c\/h2\u003e\n\u003cp\u003eThe Monster Valve Tap3's oversized bore moves air dramatically faster than a conventional Schrader valve. A single Monster Valve delivers comparable flow to four standard Schrader valves, which means a large tire can air down from 35 psi to 10 psi in under 30 seconds and air back up in approximately 45 seconds when paired with a Monster Chuck and a Power Tank CO2 system. That speed matters on a trail where airing down before a technical section and airing back up before returning to pavement is a routine stop, not a lengthy delay.\u003c\/p\u003e\n\n\u003ch2\u003eRigid, Lightweight Construction That Does Not Require Rebalancing\u003c\/h2\u003e\n\u003cp\u003eThe Monster Valve Tap3 body, collar, and dust cap are machined from aluminum, keeping the total valve weight at 1.1 oz. At that weight, adding the valve as a second stem does not require a tire rebalance. The 3\/8-24 straight-thread design is five times stiffer than a standard metal valve stem, resisting flex and fatigue at the wheel during off-road use. Straight threads are also easier to start cleanly than tapered NPT threads and eliminate the risk of over-threading during installation.\u003c\/p\u003e\n\n\u003ch2\u003eInstalls Without Removing the Tire\u003c\/h2\u003e\n\u003cp\u003eThe Monster Valve Tap3 threads into a drilled and tapped hole in the wheel. The installation process (drill with a 'Q' bit, tap 3\/8-24 threads, thread in the valve) can be completed with the tire still mounted on the rim. Because this listing is a spare or replacement valve, the 'Q' drill bit, 3\/8-24 tap, and installation key are not included; those tools are available separately as the Monster Valve Tap 3\/8-24 and 'Q' Drill Bit Combo.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread spec:\u003c\/strong\u003e 3\/8-24 straight thread for clean, leak-free seating\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 7018 aluminum body and collar with aluminum dust cap\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.1 oz per valve, no tire rebalancing required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStiffness:\u003c\/strong\u003e five times stiffer than a standard metal valve stem\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWheel compatibility:\u003c\/strong\u003e installs into steel or aluminum wheels\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLifetime warranty:\u003c\/strong\u003e covered under Power Tank's lifetime warranty; everything is rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThread\u003c\/td\u003e\n      \u003ctd\u003e3\/8-24 straight thread\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBody material\u003c\/td\u003e\n      \u003ctd\u003e7018 aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCollar material\u003c\/td\u003e\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDust cap material\u003c\/td\u003e\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eValve weight\u003c\/td\u003e\n      \u003ctd\u003e1.1 oz\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWheel compatibility\u003c\/td\u003e\n      \u003ctd\u003eSteel or aluminum wheels\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eQuantity\u003c\/td\u003e\n      \u003ctd\u003e1 valve stem\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded\u003c\/td\u003e\n      \u003ctd\u003eValve stem only (no drill bit, tap, installation key, or Monster Chuck)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWarranty\u003c\/td\u003e\n      \u003ctd\u003eLifetime; void if used with balancing beads\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eMON-8820\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Monster Valve Tap3 single unit suits overlanders and off-road drivers who already own the Monster Valve installation tools (the 'Q' drill bit, 3\/8-24 tap, and installation key) and need a spare or replacement 3\/8-24 tap-style valve stem for a steel or aluminum wheel. It also works as a first valve for buyers purchasing the install tools separately.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis listing does not include the 'Q' drill bit, 3\/8-24 tap, installation key, or Monster Chuck. Buyers starting a fresh install should consider the 5-pack with install tools instead. The Monster Valve Tap3 is not compatible with wheels designed for the Monster Valve Primary (standard valve stem mount), Flat2 (dual valve stem), or LOCK (Icon Pro InnerLock) styles. The warranty is void if the valve is used with balancing beads.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included with this single Monster Valve Tap3?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThis listing includes one Monster Valve Tap3 (3\/8-24) valve stem only. The 'Q' drill bit, 3\/8-24 tap, installation key, and Monster Chuck are not included. Buyers who need installation tools should look at the Monster Valve Tap 3\/8-24 and 'Q' Drill Bit Combo or the 5-pack with install tools, both available separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill the Monster Valve Tap3 fit my wheels?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Monster Valve Tap3 installs into steel or aluminum wheels by drilling a hole with a 'Q' bit and tapping 3\/8-24 straight threads. A Monster Valve Fit Kit is available to test compatibility across multiple Monster Valve styles before committing to an install. Wheels designed for the Primary, Flat2, or LOCK Monster Valve styles use different mounting methods and are not compatible with the Tap3.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs the Monster Valve Tap3 compatible with TPMS sensors?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. When the Monster Valve Tap3 is installed as a secondary valve stem alongside the factory Schrader valve, the existing TPMS sensor remains on the Schrader stem and continues to function normally. If the Monster Valve is installed as the only valve stem, a TPMS bracket is available to reuse the factory sensor; some vehicles may require an aftermarket TPMS sensor.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the Monster Valve Tap3 be used with balancing beads?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Monster Valve Tap3 warranty is void if the valve is used with balancing beads. Buyers running bead-balanced tires should not install this valve stem.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow difficult is it to install the Monster Valve Tap3?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eInstallation requires drilling a hole in the wheel with a 'Q' drill bit, tapping 3\/8-24 straight threads with the matching tap, and threading in the valve, all with the tire still mounted on the rim. The 3\/8-24 straight thread is easier to start cleanly than a tapered NPT thread and does not require precise depth control to avoid over-threading. The tools are not included with this single-valve listing and must be purchased separately.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621712072774,"sku":"MON-8820","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/MON-8820_753a28fc-0753-4086-82ee-c11041a7c311.jpg?v=1791937348"},{"product_id":"power-tank-pt-shock-chuck-xl-no-air-loss-for-ventoso-red","title":"Power Tank PT Shock Chuck XL No-Air-Loss for Ventoso RED","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank PT Shock Chuck XL is a no-air-loss chuck accessory designed to attach to the Ventoso RED tire inflator system for precise inflation of pressure-sensitive equipment such as shocks and aircraft tires. Its double-action mechanism seals the connection before the Schrader core opens, so no air escapes when the chuck is disconnected, preserving the exact pressure set during inflation.\u003c\/p\u003e\n\n\u003ch2\u003eAccurate Inflation Where Pressure Margins Are Tight\u003c\/h2\u003e\n\u003cp\u003eShocks and aircraft tires operate within narrow pressure windows where even a small bleed-out on disconnect can mean the difference between a correct fill and one that needs to be redone. The PT Shock Chuck XL eliminates that variable by keeping the Schrader core closed until the chuck is fully seated on the valve's external threads, and closing it again before the chuck is removed. The pressure reading and the fill stay accurate from start to finish.\u003c\/p\u003e\n\n\u003ch2\u003eA Two-Step Connection That Stays Sealed\u003c\/h2\u003e\n\u003cp\u003eThe double-action design separates attachment from valve actuation into two distinct steps. The grey thumb screw threads onto the Schrader valve's external threads first, creating a mechanical seal around the valve before any air moves. The red thumb nut then opens the Schrader core to allow inflation. Reversing the sequence on disconnect (closing the core before unthreading the chuck) means the valve is sealed at every stage and no pressure bleeds out between the inflator and the equipment being filled.\u003c\/p\u003e\n\n\u003ch2\u003ePlugs Directly into the Ventoso RED System\u003c\/h2\u003e\n\u003cp\u003eThe PT Shock Chuck XL is built as a RED MOD accessory, meaning it connects directly to the Ventoso RED quick-switch coupler without adapters or additional fittings. Ventoso RED owners who already use the system for standard tire inflation can add this chuck for shock and aircraft tire work without changing their inflator setup.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo-Air-Loss design:\u003c\/strong\u003e eliminates pressure bleed-out when disconnecting from the valve\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrey thumb screw:\u003c\/strong\u003e threads onto Schrader external threads for a sealed mechanical connection before the core opens\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRed thumb nut:\u003c\/strong\u003e opens and closes the Schrader core independently of the attachment step\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVentoso RED compatibility:\u003c\/strong\u003e plugs directly into the Ventoso RED quick-switch coupler\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision use case:\u003c\/strong\u003e suited for shocks and aircraft tires where accurate pressure is critical\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eTIG-25SL\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.3 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eChuck Type\u003c\/td\u003e\n      \u003ctd\u003eNo-Air-Loss \/ Zero-Loss, double-action Schrader\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible System\u003c\/td\u003e\n      \u003ctd\u003eVentoso RED (RED MOD accessory)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe PT Shock Chuck XL suits Ventoso RED owners who need to inflate shocks or aircraft tires and require zero pressure loss on disconnect for an accurate, repeatable fill.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis chuck is designed for the Ventoso RED system and is not stated to be compatible with other Ventoso inflator lines or with standard air compressor hose fittings. It is not a general-purpose tire chuck for standard passenger or off-road tire inflation.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat types of equipment is the PT Shock Chuck XL designed to inflate?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe PT Shock Chuck XL is designed for pressure-sensitive equipment including shocks and aircraft tires, where precise fill pressure matters and any air loss on disconnect would compromise accuracy. It is not described as a general-purpose chuck for standard vehicle tires.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow does the no-air-loss mechanism prevent bleed-out?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe PT Shock Chuck XL uses a double-action design: the grey thumb screw first threads onto the Schrader valve's external threads to create a sealed connection, then the red thumb nut opens the Schrader core for inflation. Reversing these steps on disconnect keeps the core closed before the chuck is removed, so no air escapes.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhich inflator system does this chuck connect to?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe PT Shock Chuck XL is a RED MOD accessory built to plug directly into the Power Tank Ventoso RED tire inflator system. It is not confirmed to work with other Power Tank inflator lines or third-party systems.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this chuck require any tools or adapters to install?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe PT Shock Chuck XL plugs directly into the Ventoso RED quick-switch coupler without additional adapters. The thumb screw and thumb nut are operated by hand; no tools are required for attaching or detaching the chuck from a Schrader valve.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621712924742,"sku":"TIG-25SL","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/TIG-25SLHERO.jpg?v=1791937366"},{"product_id":"power-tank-red-mod-euro-clip-on-chuck-for-ventoso-red","title":"Power Tank RED MOD Euro-Clip-On Chuck for Ventoso RED","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank RED MOD Euro-Clip-On is a classic-style tire chuck designed for the Ventoso RED modular tire inflator system. Built from fully rebuildable components with a centered pin, this chuck resists the wear that sidelines lesser alternatives and keeps the Ventoso RED in service for the long run.\u003c\/p\u003e\n\n\u003ch2\u003eA Chuck Style That Has Earned Its Place\u003c\/h2\u003e\n\u003cp\u003eThe Euro-Clip-On design has been a field standard for decades because it seats quickly and holds securely under pressure. For Ventoso RED users who prefer this style over push-on or dual-head chucks, the RED MOD Euro-Clip-On slots into the same Quick-Switch coupler system, so swapping between chuck types takes seconds rather than tools.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to Be Serviced, Not Discarded\u003c\/h2\u003e\n\u003cp\u003eThe centered pin inside the Euro-Clip-On chuck is the part that takes the most abuse in daily use. Power Tank machines this pin to stay centered under repeated cycling, and the entire chuck body is designed to be disassembled and rebuilt rather than thrown away when a seal or pin eventually wears. That repairability is what separates a genuine Power Tank chuck from lower-cost alternatives that look similar but cannot be serviced.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEuro-Clip-On style:\u003c\/strong\u003e classic clip-on chuck compatible with the Ventoso RED inflator system\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFully rebuildable:\u003c\/strong\u003e all internal components are serviceable, not sealed or disposable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentered pin design:\u003c\/strong\u003e pin stays centered under repeated use to reduce wear and extend service life\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuick-Switch compatible:\u003c\/strong\u003e fits the Ventoso RED coupler system for fast chuck swaps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eTIG-25EC\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.25 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible System\u003c\/td\u003e\n      \u003ctd\u003eVentoso RED modular tire inflator\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eChuck Style\u003c\/td\u003e\n      \u003ctd\u003eEuro-Clip-On\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to lead, a carcinogen and reproductive toxicant. For more information, visit \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis chuck suits Ventoso RED owners who prefer the Euro-Clip-On style for tire inflation work, or who want a spare or replacement chuck that can be fully rebuilt in the field rather than replaced outright.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis chuck is not stated to fit Ventoso inflator models other than the Ventoso RED. It is a chuck only and does not include a gauge, hose, or inflator body.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill the Euro-Clip-On chuck work with my Ventoso RED inflator?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe RED MOD Euro-Clip-On chuck is designed specifically for the Ventoso RED modular tire inflator system and its Quick-Switch coupler. This chuck is designed for the Ventoso RED; compatibility with other Ventoso inflator lines is not stated.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan this chuck be rebuilt if a seal or pin wears out?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Euro-Clip-On chuck is fully rebuildable: the internal components, including the centered pin and seals, can be disassembled and replaced rather than requiring the entire chuck to be discarded.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill this chuck work with a standard shop air compressor?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Euro-Clip-On chuck style is not proprietary to CO2 systems. Power Tank states that Ventoso chucks work with any air source, including standard compressors, because there is nothing that makes them exclusive to CO2 input.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the Proposition 65 warning on this product mean?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Euro-Clip-On chuck carries a California Proposition 65 warning for lead, a carcinogen and reproductive toxicant. For details on what this means and how to reduce exposure, visit www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621714989126,"sku":"TIG-25EC","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/TIG-25EC.jpg?v=1791937443"},{"product_id":"power-tank-ventoso-red-dual-head-angle-tire-chuck","title":"Power Tank Ventoso RED Dual-Head Angle Tire Chuck","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Ventoso RED Dual-Head Angle Chuck is a quick-swap tire chuck accessory for the Ventoso RED Tire Inflator Gauge, replacing the standard HiPPO2 chuck to handle dual rear wheels and motorcycle valve stems. It ships with two back styles, angled and straight, to match different wheel configurations, so one chuck covers the jobs a single-head chuck cannot. The chuck attaches via the Ventoso RED Quick-Switch coupler system.\u003c\/p\u003e\n\n\u003ch2\u003eOne Tool, More Wheel Types\u003c\/h2\u003e\n\u003cp\u003eDual rear wheels on trucks and trailers present a problem for standard single-head chucks: the inboard valve stem is often too close to the wheel face to seat a straight chuck cleanly. The Dual-Head Angle Chuck solves this without stem extensions: the angled back reaches inboard stems on most steel dually wheels and on aluminum wheels with large openings, so airing up both rear tires stays fast and doesn't require extra hardware in the bag.\u003c\/p\u003e\n\n\u003ch2\u003eMotorcycle Valve Stems Without a Separate Tool\u003c\/h2\u003e\n\u003cp\u003eSpoked motorcycle wheels use narrow valve stem access points that a standard wide chuck cannot grip reliably. The Dual-Head Angle Chuck's geometry fits motorcycle valve stems, turning the Ventoso RED into a single inflator that handles passenger tires, dually truck wheels, and motorcycle tires without swapping to a different gauge or carrying a second chuck style.\u003c\/p\u003e\n\n\u003ch2\u003eSwaps In, Not Out\u003c\/h2\u003e\n\u003cp\u003eThe chuck replaces the HiPPO2 on the Ventoso RED in the field, with no tools and no disassembly of the gauge body required. Owners who already carry the Ventoso RED get dually and motorcycle capability by adding one small accessory rather than buying a second inflator. The straight-back version of the chuck is designed specifically for Alcoa aluminum wheels with small round openings, a fitment the angled back does not cover.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo back styles included:\u003c\/strong\u003e angled back for most steel dually wheels and aluminum wheels with large openings; straight back for Alcoa aluminum wheels with small round openings\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-head design:\u003c\/strong\u003e fits both dual rear wheel valve stems and motorcycle valve stems without stem extensions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuick-Switch compatible:\u003c\/strong\u003e swaps onto the Ventoso RED in place of the standard HiPPO2 chuck\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLightweight:\u003c\/strong\u003e 0.25 lb total weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eTIG-25DA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.25 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible gauge system\u003c\/td\u003e\n      \u003ctd\u003eVentoso RED (Quick-Switch coupler)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBack styles\u003c\/td\u003e\n      \u003ctd\u003eAngled and straight\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIntended valve stem types\u003c\/td\u003e\n      \u003ctd\u003eDual rear wheel stems, motorcycle valve stems\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis chuck is for Ventoso RED owners who regularly air up dual rear wheel trucks or trailers without stem extensions, and for riders who want to use their Ventoso RED on motorcycle valve stems. It is also suited to anyone who needs the straight-back style for Alcoa aluminum wheels with small round openings.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Safety Whip 2ft Hose Extension is not included; it is a separate accessory recommended for high-pressure (80+ psi) or potentially damaged tires. This chuck is designed for the Ventoso RED Quick-Switch coupler system; compatibility with non-RED Ventoso inflators depends on whether the RED coupler upgrade has been installed on those units.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Ventoso inflators does this chuck fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Dual-Head Angle Chuck is designed for the Ventoso RED Tire Inflator Gauge, which uses the Quick-Switch coupler system. Older or non-RED Ventoso inflators can accept it only if the RED coupler upgrade has been installed on the gauge body.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between the angled back and the straight back?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe angled back on this Dual-Head Angle Chuck fits most dual rear wheels with steel wheels and some aluminum wheels with large openings. The straight back is designed specifically for Alcoa aluminum wheels that have small round openings, where the angled geometry does not seat correctly.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDo I need stem extensions to use this chuck on dually wheels?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Dual-Head Angle Chuck is designed for use on dual rear wheels when stem extensions are not in use. The dual-head geometry reaches inboard valve stems that a standard single-head chuck cannot access without an extension.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this chuck work on motorcycle valve stems?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Dual-Head Angle Chuck fits motorcycle valve stems, allowing the Ventoso RED Tire Inflator Gauge to be used on motorcycles as well as trucks and trailers without switching to a separate chuck or inflator.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs the Safety Whip hose extension included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Safety Whip 2ft Hose Extension is a separate accessory. Power Tank recommends it when airing up high-pressure tires (80 psi and above) or potentially damaged tires, as it provides additional stand-away distance. It is sold separately.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621715251270,"sku":"TIG-25DA","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/TIG-25DAHERO.jpg?v=1791937475"},{"product_id":"power-tank-red-mod-dual-head-straight-chuck-for-ventoso-red","title":"Power Tank RED MOD Dual-Head Straight Chuck for Ventoso RED","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank RED MOD Dual-Head Straight Chuck is a swap-on tire chuck accessory for the Ventoso RED Tire Inflator Gauge, designed for dual rear wheel (dually) setups where the valve stem points toward the center of the vehicle. It replaces the standard HiPPO2 chuck on any Ventoso RED inflator gauge and is built specifically for use without stem extensions on dually wheels.\u003c\/p\u003e\n\n\u003ch2\u003eThe Right Chuck for Dually Wheels\u003c\/h2\u003e\n\u003cp\u003eStandard tire chucks are designed for outward-facing valve stems on single rear wheel vehicles. On dually trucks, the inner rear valve stems often point inward toward the vehicle centerline, making a standard chuck difficult or impossible to seat properly. The Dual-Head Straight Chuck is shaped to reach those inward-facing stems directly, so airing up all four rear tires on a dually does not require stem extensions or awkward positioning.\u003c\/p\u003e\n\n\u003ch2\u003eStraight Back for Alcoa Aluminum Wheels\u003c\/h2\u003e\n\u003cp\u003eThe straight-back design of this chuck is intended primarily for Alcoa aluminum dually wheels, which have small round openings that a standard or angled chuck cannot clear. The angled-back style fits most dual wheels with steel wheels and some aluminum wheels with larger openings; the straight-back style addresses the tighter geometry of Alcoa aluminum wheels specifically. Choosing the correct back style ensures a secure, leak-free connection at the valve stem.\u003c\/p\u003e\n\n\u003ch2\u003eQuick Swap onto Any Ventoso RED Gauge\u003c\/h2\u003e\n\u003cp\u003eThe Dual-Head Straight Chuck installs onto the Ventoso RED Quick-Switch coupler in place of the standard HiPPO2 chuck, converting any Ventoso RED Tire Inflator Gauge into a dually-capable inflator without purchasing a separate tool. Swapping back to the HiPPO2 for standard wheels takes the same quick-release motion, so one Ventoso RED gauge can serve both single and dual rear wheel vehicles.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDually-specific geometry:\u003c\/strong\u003e straight-back design reaches inward-facing valve stems on Alcoa aluminum dually wheels with small round openings\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo stem extensions required:\u003c\/strong\u003e seats directly on the valve stem without adapters or extensions on dual rear wheel setups\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuick-Switch compatible:\u003c\/strong\u003e swaps onto the Ventoso RED coupler in place of the standard HiPPO2 chuck\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-head design:\u003c\/strong\u003e accommodates dual rear wheel configurations where a single-head chuck cannot reach\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eTIG-25DS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.25 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible gauge system\u003c\/td\u003e\n      \u003ctd\u003eVentoso RED Tire Inflator Gauge (Quick-Switch coupler)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePrimary wheel application\u003c\/td\u003e\n      \u003ctd\u003eAlcoa aluminum dually wheels with small round openings; dual rear wheels without stem extensions\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBack style\u003c\/td\u003e\n      \u003ctd\u003eStraight (for Alcoa aluminum wheels with small round openings)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Dual-Head Straight Chuck is for dually truck owners running Alcoa aluminum wheels with small round openings, or any dual rear wheel setup where the valve stem faces inward and stem extensions are not in use, who already own a Ventoso RED Tire Inflator Gauge with a Quick-Switch coupler.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis chuck does not replace a complete tire inflator gauge and does not include a hose, gauge body, or coupler. It is not designed for single rear wheel vehicles or standard outward-facing valve stem configurations. Power Tank recommends adding the separately sold Safety Whip 2ft Hose Extension when inflating tires at 80 psi or above, or when inflating a potentially damaged tire, to provide additional stand-away distance.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Ventoso RED gauges does this chuck fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Dual-Head Straight Chuck is designed to swap onto any Ventoso RED Tire Inflator Gauge equipped with the Quick-Switch RED coupler, replacing the standard HiPPO2 chuck.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhen do I need the Dual-Head Straight Chuck instead of the standard HiPPO2?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Dual-Head Straight Chuck is needed on dually trucks where the inner rear valve stems point toward the center of the vehicle and stem extensions are not being used. The standard HiPPO2 chuck is designed for outward-facing stems on single rear wheel vehicles and cannot reliably seat on inward-facing dually stems.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between the angled-back and straight-back dual-head chuck?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe angled-back dual-head chuck fits most dual rear wheel setups with steel wheels and some aluminum wheels that have larger openings. The straight-back version (this product) is intended primarily for Alcoa aluminum dually wheels, which have smaller round openings that require the straight-back geometry to clear.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs the Safety Whip hose extension included with this chuck?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Safety Whip 2ft Hose Extension is not included with the Dual-Head Straight Chuck and is sold separately. Power Tank recommends using the Safety Whip extension when inflating tires at 80 psi or above, or when inflating a potentially damaged tire, to provide approximately 4 feet of stand-away distance in case of a blowout.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621715906630,"sku":"TIG-25DS","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/TIG-25DSHERO.jpg?v=1791937553"},{"product_id":"power-tank-ventoso-red-modular-blow-gun-attachment-kit","title":"Power Tank Ventoso RED Modular Blow Gun Attachment Kit","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank RED MOD Blow Gun Kit adds three interchangeable blow gun tips to any Ventoso RED Modular Tire Inflator Gauge, converting it from a dedicated tire inflator into a versatile compressed-air tool for engine bay work, interior detailing, and line clearing. The kit includes an extendable tip, a fine point tip, and a rubber cone tip, all of which swap in at the RED Coupler in place of the HiPPO2 tire chuck and are compatible with all Ventoso RED models.\u003c\/p\u003e\n\n\u003ch2\u003eMore Than a Tire Inflator\u003c\/h2\u003e\n\u003cp\u003eA Ventoso RED gauge is already a capable tire inflator. The RED MOD Blow Gun Kit extends that investment by turning the same tool into a compressed-air blower for tasks that come up on the trail and in the garage. Rather than carrying a separate blow gun, the kit lets a single inflator handle tire airing and general air-tool work, reducing what needs to live in a recovery kit or tool bag.\u003c\/p\u003e\n\n\u003ch2\u003eThree Tips, Three Jobs\u003c\/h2\u003e\n\u003cp\u003eThe extendable tip reaches from 8 to 12 inches, giving enough length to direct airflow into tight spots such as an engine bay without repositioning the gauge body. The fine point tip concentrates airflow for detail work: clearing debris from seat seams, blowing out a center console, or inflating sports balls. The rubber cone tip forms a seal against an opening, making it suited for clearing air or fluid lines where a loose tip would lose pressure.\u003c\/p\u003e\n\n\u003ch2\u003eSwaps at the RED Coupler\u003c\/h2\u003e\n\u003cp\u003eAll three blow gun tips connect at the same RED Coupler used by the HiPPO2 tire chuck, so switching between tire inflation and blow gun work means swapping one attachment at the coupler rather than picking up a second tool. The tips are interchangeable across all Ventoso RED models.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThree-tip kit:\u003c\/strong\u003e extendable, fine point, and rubber cone tips included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtendable tip:\u003c\/strong\u003e adjusts from 8 to 12 inches for reaching into confined spaces\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRubber cone tip:\u003c\/strong\u003e seals against an opening for clearing air or fluid lines\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRED Coupler compatible:\u003c\/strong\u003e interchangeable with the HiPPO2 tire chuck on all Ventoso RED models\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOne-hand aim:\u003c\/strong\u003e hold the blow gun with one hand and modulate pressure with the other\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded Tips\u003c\/td\u003e\n      \u003ctd\u003eExtendable tip, fine point tip, rubber cone tip\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eExtendable Tip Range\u003c\/td\u003e\n      \u003ctd\u003e8–12 inches\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible With\u003c\/td\u003e\n      \u003ctd\u003eAll Ventoso RED Modular Tire Inflator Gauge models\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConnection Point\u003c\/td\u003e\n      \u003ctd\u003eRED Coupler (same as HiPPO2 tire chuck)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eTIG-25BG\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.25 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe RED MOD Blow Gun Kit suits any Ventoso RED Modular Tire Inflator Gauge owner who wants to use the same tool for compressed-air tasks beyond tire inflation, including engine bay work, interior cleaning, and line clearing on the trail or in the shop.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis kit does not include a Ventoso RED inflator gauge; the gauge must be purchased separately. The blow gun tips are not compatible with non-RED Ventoso models or with other brands of tire inflator gauges.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Ventoso RED models does this blow gun kit fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe RED MOD Blow Gun Kit is compatible with all Ventoso RED Modular Tire Inflator Gauge models. The tips connect at the RED Coupler and are interchangeable with the HiPPO2 tire chuck across the full Ventoso RED lineup.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat three tips are included in the kit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe RED MOD Blow Gun Kit includes an extendable tip (adjustable from 8 to 12 inches), a fine point tip for detail and precision airflow work, and a rubber cone tip that seals against an opening for clearing air or fluid lines.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow does the extendable tip work?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe extendable blow gun tip slides to any length between 8 and 12 inches, allowing the user to direct airflow into tight or hard-to-reach spaces, such as deep into an engine bay, without repositioning the Ventoso RED gauge body.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this kit include the Ventoso RED inflator gauge?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The RED MOD Blow Gun Kit contains only the three blow gun tips. The Ventoso RED Modular Tire Inflator Gauge is sold separately and must already be in hand for the blow gun tips to be used.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621715972166,"sku":"TIG-25BG","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/PTM-0095HERO2-sq.jpg?v=1791937556"},{"product_id":"power-tank-60d-tpg-red-60-psi-backlit-digital-modular-tire-pressure-ga","title":"Power Tank 60D TPG RED 60 psi Backlit Digital Modular Tire Pressure Gauge","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank 60D TPG RED is a standalone backlit digital tire pressure gauge covering 1.5–60 psi with 1% accuracy (+\/-0.6 psi), built around the RED MOD quick-switch coupler system for use with Schrader valves and Monster Valves. It ships with a precision gauge, quick-switch coupler, and a HiPPO2 Hi-Pressure Push-On\/Pull-Off tire chuck.\u003c\/p\u003e\n\n\u003ch2\u003eReal-Time Readings Without Mechanical Drift\u003c\/h2\u003e\n\u003cp\u003eThe 60D TPG RED uses a digital sensor with no mechanical parts, so it holds calibration longer than an analog gauge and can be recalibrated when needed. Drivers who rely on precise pressures during airing-up and airing-down sessions get a reading they can trust rather than one that has drifted with wear. The backlit display stays readable in low light, whether that is pre-dawn at a trailhead or inside a dark wheel well. At 1% accuracy (+\/-0.6 psi), the gauge delivers readings that are twice as accurate as the 0-60 psi analog alternative.\u003c\/p\u003e\n\n\u003ch2\u003eAAA Batteries, 200-Hour Run Time\u003c\/h2\u003e\n\u003cp\u003eThe 60D TPG RED runs on AAA batteries, which are easy to source and carry as spares anywhere. A 200-hour rated run time means the gauge will last through years of regular use before a battery swap is needed. No proprietary charging cables are required, and there is no risk of arriving at a trailhead with a dead gauge.\u003c\/p\u003e\n\n\u003ch2\u003eModular RED MOD Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe 60D TPG RED uses the same RED MOD attachment system as the Ventoso RED tire inflator gauges, so it accepts the same quick-switch tire chucks and optional 2 ft hose extension (each sold separately). Swapping between a push-on chuck for standard wheels and other RED MOD accessories requires no tools. The compact form factor makes the TPG RED practical to carry as a dedicated pressure-check tool alongside a separate inflator.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacklit digital display:\u003c\/strong\u003e 1.5–60 psi range, readable in low light\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1% accuracy:\u003c\/strong\u003e +\/-0.6 psi, recalibratable, no mechanical parts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e200-hour battery life:\u003c\/strong\u003e powered by standard AAA batteries\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRED MOD system:\u003c\/strong\u003e quick-switch coupler accepts RED MOD tire chucks and hose extensions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHiPPO2 tire chuck included:\u003c\/strong\u003e Hi-Pressure Push-On\/Pull-Off narrow chuck, compatible with all wheels\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMonster Valve compatible:\u003c\/strong\u003e monitors pressure second-to-second through a Schrader or Monster Valve while airing up or down\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePressure Range\u003c\/td\u003e\n      \u003ctd\u003e1.5–60 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAccuracy\u003c\/td\u003e\n      \u003ctd\u003e1% \/ +\/-0.6 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDisplay\u003c\/td\u003e\n      \u003ctd\u003eBacklit digital\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBattery Type\u003c\/td\u003e\n      \u003ctd\u003eAAA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBattery Run Time\u003c\/td\u003e\n      \u003ctd\u003e200 hours\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCoupler System\u003c\/td\u003e\n      \u003ctd\u003eRED MOD quick-switch\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded Chuck\u003c\/td\u003e\n      \u003ctd\u003eHiPPO2 Hi-Pressure Push-On\/Pull-Off tire chuck\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eTPG-2060\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe 60D TPG RED suits overlanders, 4x4 drivers, and track-day drivers who want a dedicated digital pressure gauge for vehicles with tire pressures up to 55 psi. It works with Schrader valves and Monster Valves and integrates directly into any RED MOD setup for quick chuck swaps.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe 60D TPG RED is a pressure gauge only, not a tire inflator, and does not inflate tires. The gauge reads to a maximum of 60 psi and is not suited for tires that require readings above that ceiling. Optional 2 ft hose extensions and additional tire chucks are sold separately and are not included.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat pressure range does the 60D TPG RED cover?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank 60D TPG RED reads tire pressure from 1.5 to 60 psi, making it suitable for 4x4s and passenger vehicles with operating pressures up to 55 psi. The digital sensor carries a 1% accuracy rating of +\/-0.6 psi and can be recalibrated when needed.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat batteries does the gauge use and how long do they last?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 60D TPG RED is powered by standard AAA batteries with a rated run time of 200 hours. AAA batteries are widely available, making it straightforward to carry spares on a trip without relying on a charging cable or proprietary power source.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat comes included with the 60D TPG RED?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank 60D TPG RED ships with a precision gauge, a RED MOD quick-switch coupler, and a HiPPO2 Hi-Pressure Push-On\/Pull-Off tire chuck. A 2 ft hose extension and additional push-on tire chucks are available separately as RED MOD accessories.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the 60D TPG RED be recalibrated?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The 60D TPG RED digital gauge supports recalibration, which allows the gauge to be brought back to spec if readings drift over time. This is an advantage over analog gauges, which cannot be recalibrated once their mechanical components wear.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the 60D TPG RED work with Monster Valves?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 60D TPG RED is compatible with Schrader valves and Monster Valves. When used with Monster Valves, the gauge can monitor tire pressure second-to-second during airing-up and airing-down, giving the driver a continuous live reading throughout the process.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat other RED MOD accessories are compatible with the 60D TPG RED?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 60D TPG RED uses the same RED MOD attachment system as the Ventoso RED tire inflator gauges. It accepts RED MOD quick-switch tire chucks and the optional 2 ft hose extension, each sold separately, allowing the gauge to be configured for different wheel types or reach requirements.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621719609414,"sku":"TPG-2060","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/TPG-2060HERO.jpg?v=1791937676"},{"product_id":"power-tank-tpg-red-60-psi-analog-tire-pressure-gauge","title":"Power Tank TPG RED 60 psi Analog Tire Pressure Gauge","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank TPG RED is a 0–60 psi silicone-filled analog tire pressure gauge built around the RED MOD modular attachment system. Accurate to +\/-1.2 psi, it suits 4x4s and passenger vehicles with tire pressures up to 55 psi and ships with a quick-switch RED Coupler and HiPPO2 tire chuck included.\u003c\/p\u003e\n\n\u003ch2\u003eSilicone Fill for Cold-Weather Accuracy\u003c\/h2\u003e\n\u003cp\u003eThe TPG RED uses silicone fluid rather than the glycerin fill common in most analog gauges. Glycerin thickens and becomes sluggish in cold temperatures, which slows needle response and can introduce read error at the worst possible moment: airing down at a cold-morning trailhead. Silicone stays fluid across a wider temperature range, so the gauge needle moves freely and settles quickly whether the air is warm or freezing.\u003c\/p\u003e\n\n\u003ch2\u003eRED MOD Modular System\u003c\/h2\u003e\n\u003cp\u003eThe TPG RED uses the same RED MOD attachment system as the Ventoso RED line of tire inflator gauges, in a more compact standalone package. The included quick-switch RED Coupler lets the gauge swap between tire chuck styles without tools, which is useful when moving between standard Schrader valves and Monster Valves during an airing-up or airing-down session. Optional RED MOD accessories (2 ft hose extension, additional tire chucks) can be added later without replacing the gauge itself.\u003c\/p\u003e\n\n\u003ch2\u003eHiPPO2 Chuck Included\u003c\/h2\u003e\n\u003cp\u003eEvery TPG RED ships with a HiPPO2 Hi-Pressure Push-On\/Pull-Off tire chuck. The narrow HiPPO2 profile fits all wheel types and is tested to 1,000 psi, well above the pressures any passenger or 4x4 tire will see. Push-on engagement and pull-off release keep the process fast when checking multiple tires at the track or on the trail.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e0–60 psi range:\u003c\/strong\u003e suited for 4x4s and passenger vehicles with tire pressures up to 55 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSilicone-filled gauge:\u003c\/strong\u003e maintains fluid needle response in cold temperatures where glycerin-filled gauges become sluggish\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2% accuracy \/ +\/-1.2 psi:\u003c\/strong\u003e precision analog face for reliable pressure readings\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRED MOD system:\u003c\/strong\u003e quick-switch RED Coupler accepts interchangeable tire chucks and optional hose extensions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHiPPO2 chuck included:\u003c\/strong\u003e narrow push-on\/pull-off chuck tested to 1,000 psi, fits all wheel types\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSchrader valve compatible:\u003c\/strong\u003e works with standard valve stems and Monster Valves during airing up and airing down\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eGauge type\u003c\/td\u003e\n      \u003ctd\u003eLiquid analog (silicone-filled)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePressure range\u003c\/td\u003e\n      \u003ctd\u003e0–60 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAccuracy\u003c\/td\u003e\n      \u003ctd\u003e2% \/ +\/-1.2 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecommended max tire pressure\u003c\/td\u003e\n      \u003ctd\u003e55 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAttachment system\u003c\/td\u003e\n      \u003ctd\u003eRED MOD (quick-switch RED Coupler)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded chuck\u003c\/td\u003e\n      \u003ctd\u003eHiPPO2 Hi-Pressure Push-On\/Pull-Off, tested to 1,000 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eValve compatibility\u003c\/td\u003e\n      \u003ctd\u003eSchrader (standard and Monster Valve)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eTPG-1060\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe TPG RED suits overlanders, 4x4 drivers, and track-day participants who want a fast, accurate standalone pressure check, particularly in cold conditions where a glycerin gauge would slow down. It works as a companion to Monster Valves and Ventoso RED inflator gauges in a modular RED MOD setup.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe TPG RED is not suited for tires requiring pressures above 55 psi. The 2 ft hose extension and additional tire chucks are sold separately and are not included. Per Power Tank's warranty terms, gauges are exempt from the fix-or-replace portion of the five-year warranty.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the TPG RED work with a standard air compressor?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank TPG RED is not proprietary to any air source and works with standard air compressors. The gauge and chuck are built to handle higher input pressures and the extra physical abuse of off-road use, but there is nothing in the design that limits it to CO2 or Power Tank systems.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between silicone fill and glycerin fill in an analog gauge?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eIn the TPG RED, silicone fluid keeps the needle moving freely in cold temperatures. Glycerin, the fill used in most analog gauges, thickens in cold weather, which slows needle response and can affect read accuracy. Silicone maintains consistent viscosity across a wider temperature range.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included with the TPG RED, and what is sold separately?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank TPG RED ships with the precision analog gauge, a quick-switch RED Coupler, and a HiPPO2 Hi-Pressure Push-On\/Pull-Off tire chuck. A 2 ft RED MOD hose extension and additional tire chuck styles are available as separate RED MOD accessories and are not included.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the TPG RED be used to monitor pressure while airing down?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe TPG RED is designed to read pressure in real time through a Schrader valve, including Monster Valves, making it practical for monitoring tire pressure second-to-second while airing up or airing down. The quick-switch coupler allows fast attachment and removal between tires.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the Power Tank warranty cover for the TPG RED?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003ePower Tank offers a five-year warranty with a lifetime of service on its products. Gauges are explicitly exempt from the fix-or-replace portion of that warranty. After five years, or when a purchase date cannot be confirmed, replacement components are available at 50% of retail cost with repair services offered.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621719674950,"sku":"TPG-1060","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/TPG-1060HERO.jpg?v=1791937678"},{"product_id":"power-tank-tpg-red-150-psi-analog-modular-tire-pressure-gauge","title":"Power Tank TPG RED 150 psi Analog Modular Tire Pressure Gauge","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank TPG RED is a 0–150 psi silicone-filled liquid analog tire pressure gauge built around the RED MOD quick-switch coupler system, making it a compact standalone option for checking and monitoring tire pressures on trucks, trailers, and off-road vehicles. It ships with a precision gauge, a quick-switch coupler, and a HiPPO2 Hi-Pressure Push-On\/Pull-Off tire chuck, and accepts RED MOD accessory attachments sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Cold Weather and High-Pressure Tires\u003c\/h2\u003e\n\u003cp\u003eThe TPG RED uses a silicone-filled gauge rather than the glycerin fill common in lower-cost gauges. Glycerin thickens in cold temperatures and slows needle response; silicone stays fluid across a wider temperature range, so the gauge reads accurately whether the air is cold at a pre-dawn trailhead or warm at a summer track day. The 0–150 psi range and 2% accuracy rating (+\/- 3.0 psi) make the TPG RED a practical choice for high-pressure truck and trailer tires running 60 psi and above, where a sluggish or inaccurate gauge creates real risk.\u003c\/p\u003e\n\n\u003ch2\u003eModular RED MOD System\u003c\/h2\u003e\n\u003cp\u003eThe TPG RED uses the same RED MOD attachment system found across the Power Tank Ventoso inflator gauge lineup, in a more compact package. The included quick-switch coupler lets a user swap tire chucks without tools, moving between standard Schrader valve stems and other chuck styles as the job changes. A 2-foot hose extension and a push-on tire chuck are available as separate RED MOD accessories, useful for reading pressures between laps or reaching recessed valve stems without repositioning.\u003c\/p\u003e\n\n\u003ch2\u003eStandalone Pressure Monitoring with Monster Valves\u003c\/h2\u003e\n\u003cp\u003eThe TPG RED connects directly to a Schrader valve, so it works as a standalone pressure check tool independent of any CO2 system. When used alongside Power Tank Monster Valve high-flow valve stems, the gauge can monitor tire pressure second-to-second during airing up or airing down, giving a continuous read rather than a spot check. This makes it useful at the trailhead before a descent and at the pump afterward.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePressure range:\u003c\/strong\u003e 0–150 psi analog liquid gauge\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSilicone fill:\u003c\/strong\u003e maintains accurate needle response in cold temperatures where glycerin-filled gauges slow down\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAccuracy:\u003c\/strong\u003e 2% accuracy, +\/- 3.0 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRED MOD system:\u003c\/strong\u003e quick-switch coupler accepts interchangeable RED MOD tire chucks and hose extensions (sold separately)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e precision gauge, quick-switch coupler, HiPPO2 Hi-Pressure Push-On\/Pull-Off tire chuck\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSchrader valve compatible:\u003c\/strong\u003e works as a standalone gauge or alongside Monster Valve high-flow valve stems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePressure Range\u003c\/td\u003e\n      \u003ctd\u003e0–150 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eGauge Type\u003c\/td\u003e\n      \u003ctd\u003eLiquid analog (silicone-filled)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAccuracy\u003c\/td\u003e\n      \u003ctd\u003e2% \/ +\/- 3.0 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCoupler System\u003c\/td\u003e\n      \u003ctd\u003eRED MOD quick-switch coupler\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded Chuck\u003c\/td\u003e\n      \u003ctd\u003eHiPPO2 Hi-Pressure Push-On\/Pull-Off tire chuck\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eValve Compatibility\u003c\/td\u003e\n      \u003ctd\u003eSchrader valve\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eTPG-1150\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe TPG RED suits overlanders, off-road drivers, and track users who need a reliable, cold-weather-capable pressure gauge for high-pressure truck and trailer tires (60 psi and above) and want the flexibility of the RED MOD modular chuck system. It pairs directly with Power Tank Monster Valve high-flow valve stems for continuous pressure monitoring during airing up or airing down.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe TPG RED is a pressure gauge only and does not supply or release air on its own. It does not include a hose extension; the 2-foot RED MOD hose extension is a separate accessory. The gauge is not covered under Power Tank's 5-year component warranty, which explicitly exempts gauges.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat pressure range does the TPG RED cover?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank TPG RED reads from 0 to 150 psi on a liquid analog gauge, making it suitable for high-pressure truck and trailer tires as well as lower-pressure off-road tires. Its 2% accuracy rating and +\/- 3.0 psi tolerance apply across the full range.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat comes included with the TPG RED?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank TPG RED ships with a precision analog gauge, a RED MOD quick-switch coupler, and a HiPPO2 Hi-Pressure Push-On\/Pull-Off tire chuck. A 2-foot hose extension and additional chuck styles are available separately as RED MOD accessories.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhy does silicone fill matter compared to glycerin?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe TPG RED uses a silicone-filled gauge rather than the glycerin fill found in many standard gauges. Glycerin thickens in cold temperatures, which slows needle movement and can affect reading accuracy. Silicone maintains its fluid properties in cold conditions, so the gauge responds consistently at low ambient temperatures.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the TPG RED be used while airing up or airing down?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The TPG RED connects to a Schrader valve and, when used with Power Tank Monster Valve high-flow valve stems, can monitor tire pressure continuously during airing up or airing down rather than requiring the inflation source to be disconnected for each spot check.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat RED MOD accessories are compatible with the TPG RED?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe TPG RED uses the same RED MOD attachment system as the Power Tank Ventoso inflator gauge lineup. Compatible accessories sold separately include a 2-foot hose extension for stand-away readings and additional push-on tire chucks for faster pressure checks between uses.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs the TPG RED covered under the Power Tank warranty?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003ePower Tank offers a 5-year component warranty on its tire inflator products, but that warranty explicitly exempts gauges. The TPG RED gauge itself does not fall under the 5-year coverage; Power Tank does offer repair services and replacement components after the warranty period at a stated discount.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621720821830,"sku":"TPG-1150","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/TPG-1150HERO.jpg?v=1791937771"},{"product_id":"power-tank-150d-tpg-red-150-psi-digital-tire-pressure-gauge","title":"Power Tank 150D TPG RED 150 psi Digital Tire Pressure Gauge","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank 150D TPG RED is a standalone backlit digital tire pressure gauge covering 5–150 psi, built around the RED MOD quick-switch coupler system for use with 4x4s, passenger cars, trucks, and trailers. It reads pressure in real time at the valve stem, making it equally useful for a quick pre-run check or for monitoring pressure second-to-second while airing up or down through Monster Valves.\u003c\/p\u003e\n\n\u003ch2\u003eDigital Accuracy Without Moving Parts\u003c\/h2\u003e\n\u003cp\u003eThe 150D TPG RED delivers 1% accuracy to within +\/-1.5 psi across its full 5–150 psi range. Because there are no mechanical parts inside, there is nothing to wear, stick, or drift the way a bourdon-tube analog gauge can over time. The gauge can also be recalibrated in the field, so accuracy does not have to degrade as the tool ages. For drivers who rely on precise pressure data to protect tires on the trail or maintain consistent lap times at the track, that combination of digital precision and long-term serviceability is a meaningful step up from a liquid-filled analog.\u003c\/p\u003e\n\n\u003ch2\u003eLong Battery Life, Easy Spares\u003c\/h2\u003e\n\u003cp\u003eThe 150D TPG RED runs on AAA batteries rated for 200 hours of use. AAA cells are available at any gas station or hardware store, so carrying a spare set adds almost no weight and eliminates the risk of a dead gauge at a remote trailhead. The backlit display stays readable in low light without requiring a separate flashlight or a phone screen held nearby.\u003c\/p\u003e\n\n\u003ch2\u003eRED MOD System Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe gauge ships with a quick-switch coupler and a HiPPO2 Hi-Pressure Push-On\/Pull-Off tire chuck, both part of the RED MOD attachment system shared across the Power Tank Ventoso RED inflator line. Swapping between chuck styles requires no tools. An optional 2 ft hose extension and an optional push-on tire chuck are available separately for stand-away readings between laps or in tight wheel-well situations.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e5–150 psi backlit digital display:\u003c\/strong\u003e covers passenger cars, trucks, 4x4s, and trailers in a single gauge\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1% accuracy, +\/-1.5 psi:\u003c\/strong\u003e no mechanical parts to wear or drift; field-recalibratable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e200-hour AAA battery life:\u003c\/strong\u003e standard batteries are easy to source and carry as spares\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRED MOD quick-switch coupler:\u003c\/strong\u003e tool-free chuck swaps; compatible with the full Ventoso RED accessory ecosystem\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHiPPO2 tire chuck included:\u003c\/strong\u003e Hi-Pressure Push-On\/Pull-Off narrow chuck tested to 1,000 psi, designed for all wheel types\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact form factor:\u003c\/strong\u003e smaller than the Ventoso RED inflator gauges while sharing the same attachment system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePressure Range\u003c\/td\u003e\n      \u003ctd\u003e5–150 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAccuracy\u003c\/td\u003e\n      \u003ctd\u003e1% +\/-1.5 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDisplay\u003c\/td\u003e\n      \u003ctd\u003eBacklit digital\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBattery Type\u003c\/td\u003e\n      \u003ctd\u003eAAA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBattery Life\u003c\/td\u003e\n      \u003ctd\u003e200 hours\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCoupler System\u003c\/td\u003e\n      \u003ctd\u003eRED MOD quick-switch\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded Chuck\u003c\/td\u003e\n      \u003ctd\u003eHiPPO2 Hi-Pressure Push-On\/Pull-Off tire chuck\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eTPG-2150\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Vehicles\u003c\/td\u003e\n      \u003ctd\u003e4x4s, passenger cars, trucks, trailers\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe 150D TPG RED suits overlanders, off-road drivers, and track-day enthusiasts who want a dedicated digital pressure gauge with a wide 5–150 psi range and the flexibility to swap tire chucks without tools. It works particularly well alongside Monster Valves for real-time pressure monitoring during airing up or airing down, and it integrates directly with the Power Tank Ventoso RED inflator system for anyone already in that ecosystem.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe 150D TPG RED is a pressure-measurement tool only. It does not inflate tires. The optional 2 ft hose extension and optional push-on tire chuck are sold separately and are not included in the box.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the 150D TPG RED inflate tires, or does it only measure pressure?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank 150D TPG RED is a standalone tire pressure gauge only. It reads pressure at the valve stem but does not supply air or CO2. To inflate tires, a separate Power Tank CO2 system or air compressor is required.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat comes in the box?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 150D TPG RED ships with the precision digital gauge, a RED MOD quick-switch coupler, and a HiPPO2 Hi-Pressure Push-On\/Pull-Off tire chuck. The optional 2 ft hose extension and optional push-on tire chuck are sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow accurate is the 150D TPG RED compared to an analog gauge?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 150D TPG RED is rated at 1% accuracy to within +\/-1.5 psi across its full 5–150 psi range. Power Tank describes it as twice as accurate as the Long Haul Analog gauge and nearly as accurate as the Trooper Analog, while offering a wider pressure range than either.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat batteries does it use, and how long do they last?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 150D TPG RED runs on AAA batteries with a rated runtime of 200 hours. AAA cells are widely available, making it straightforward to carry spares on extended trips without adding meaningful weight to a kit.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill the 150D TPG RED work with my existing Power Tank Ventoso RED inflator?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The 150D TPG RED uses the same RED MOD attachment system as the Ventoso RED inflator line, so its quick-switch coupler and tire chucks are interchangeable with other RED MOD-compatible accessories and hose extensions in that system.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the gauge be recalibrated?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 150D TPG RED supports field recalibration, which means accuracy can be restored over time without sending the gauge in for service. This is one of the advantages the digital design has over a sealed analog gauge that cannot be adjusted once it drifts.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621722001478,"sku":"TPG-2150","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/TPG-2150HERO_eab5346c-b729-4225-9601-11b6de49c0c9.jpg?v=1791937805"},{"product_id":"power-tank-red-upgrade-kit-for-ventoso-tire-inflator-gauges","title":"Power Tank RED Upgrade Kit for Ventoso Tire Inflator Gauges","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank RED Upgrade Kit retrofits any generation of Power Tank Tire Inflator Gauge (from the original yellow hose models through the current Ventoso line) to the RED MOD quick-switch coupler standard. The two-piece kit installs between the hose whip and your existing tire chuck, adding a quick-disconnect interface so you can swap tire chucks without removing or re-threading any fittings.\u003c\/p\u003e\n\n\u003ch2\u003eOne Kit, Every Chuck You Own\u003c\/h2\u003e\n\u003cp\u003eThe RED Upgrade Kit adds a RED coupler to the end of your hose whip and a PT Industrial plug to your existing tire chuck. Once installed, any RED MOD-compatible chuck (Euro Clip-On, HiPPO2, or dual-head) clicks on and off in seconds. Swapping between a narrow push-on chuck for spoked motorcycle wheels and a clip-on for standard valve stems no longer means re-threading connections at the side of the trail.\u003c\/p\u003e\n\n\u003ch2\u003eBackward Compatibility Across All Power Tank Gauge Generations\u003c\/h2\u003e\n\u003cp\u003eThe PT Industrial plug uses 1\/4\" male NPT threads that fit the tire chuck port on every tire chuck sold with Power Tank Tire Inflator Gauges, including Euro Clip-On and HiPPO2 models. The RED coupler uses 1\/4\" female NPT threads to mate with the hose whip end. No gauge replacement or hose modification is needed; the kit works with what you already own.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRED Coupler:\u003c\/strong\u003e quick-switch disconnect with 1\/4\" female NPT threads, screws onto the end of the hose whip\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePT Industrial Plug:\u003c\/strong\u003e 1\/4\" male NPT threads, screws into any Power Tank tire chuck (Euro Clip-On, HiPPO2, or other Power Tank chuck)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal Generation Fit:\u003c\/strong\u003e compatible with original yellow hose Power Tank Tire Inflator Gauges and all Ventoso line models\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModular System Entry Point:\u003c\/strong\u003e once installed, any RED MOD accessory or chuck can be swapped without tools at the coupler\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eComponent\u003c\/th\u003e\n      \u003cth\u003eThread Spec\u003c\/th\u003e\n      \u003cth\u003eConnection Point\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRED Coupler\u003c\/td\u003e\n      \u003ctd\u003e1\/4\" female NPT\u003c\/td\u003e\n      \u003ctd\u003eHose whip end\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePT Industrial Plug\u003c\/td\u003e\n      \u003ctd\u003e1\/4\" male NPT\u003c\/td\u003e\n      \u003ctd\u003eExisting tire chuck inlet\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Chucks\u003c\/td\u003e\n      \u003ctd colspan=\"2\"\u003eEuro Clip-On, HiPPO2, and any other tire chuck sold with Power Tank Tire Inflator Gauges\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Gauges\u003c\/td\u003e\n      \u003ctd colspan=\"2\"\u003eAll Power Tank Tire Inflator Gauge generations, including original yellow hose models and Ventoso line\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe RED Upgrade Kit suits any Power Tank Tire Inflator Gauge owner who wants to use quick-switch RED MOD tire chucks without replacing their existing gauge or hose. It is particularly useful for overlanders and off-road drivers who carry multiple chuck styles for different wheel types (spoked motorcycle wheels, dually wheels, and standard valve stems) and need to switch between them quickly.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis kit does not include a tire chuck, a hose whip, or a complete Tire Inflator Gauge; it upgrades the connection interface only. It is not designed for tire inflator gauges from other brands; the RED coupler and PT Industrial plug are built for Power Tank hose whip and chuck thread specifications.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Power Tank Tire Inflator Gauges does the RED Upgrade Kit fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe RED Upgrade Kit is compatible with all generations of Power Tank Tire Inflator Gauges, including the original yellow hose models and the current Ventoso line. The RED coupler threads onto the 1\/4\" NPT hose whip end, and the PT Industrial plug threads into any tire chuck sold with a Power Tank Tire Inflator Gauge.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the RED Upgrade Kit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe RED Upgrade Kit includes two pieces: a RED coupler with 1\/4\" female NPT threads that attaches to the end of the hose whip, and a PT Industrial plug with 1\/4\" male NPT threads that installs into the existing tire chuck. No tire chuck, hose whip, or gauge is included.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDo I need to replace my tire chuck to use this kit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The PT Industrial plug installs into your existing tire chuck (Euro Clip-On, HiPPO2, or any other chuck sold with Power Tank Tire Inflator Gauges), converting it to RED MOD compatibility. After installing the kit, that chuck becomes one of the quick-switch options you can use with the RED coupler.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill this kit work with tire inflators from other brands?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe RED Upgrade Kit is designed for Power Tank Tire Inflator Gauges and their hose whip and chuck thread specifications. It is not designed for tire inflators from other brands.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621724721222,"sku":"TIG-UKIT","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/TIG-UKITHERO.jpg?v=1791937887"},{"product_id":"power-tank-800-psi-silicone-filled-analog-replacement-gauge-for-shock","title":"Power Tank 800 psi Silicone-Filled Analog Replacement Gauge for Shock Inflator","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank GAU-0800L is an 800 psi analog replacement gauge for the Power Tank SIG-5800 and SIG-5850 nitrogen shock inflator tools, built as a direct swap for a broken gauge or an upgrade from a glycerin-filled unit. The gauge measures 2.5 inches in diameter, uses 1\/4\" NPT threads, and is filled with silicone fluid for reliable readability in cold-weather conditions.\u003c\/p\u003e\n\n\u003ch2\u003eSilicone Fill for Cold-Weather Accuracy\u003c\/h2\u003e\n\u003cp\u003eGlycerin-filled gauges can thicken in cold temperatures, causing the needle to lag or stick. The GAU-0800L uses silicone fluid instead, which maintains consistent viscosity across a wider temperature range, so the needle tracks pressure changes accurately even when conditions are cold.\u003c\/p\u003e\n\n\u003ch2\u003eRebuildable by Design\u003c\/h2\u003e\n\u003cp\u003eThe SIG-5800 and SIG-5850 shock inflator tools are built to be serviced at the component level rather than replaced as a unit. The GAU-0800L threads directly into the tool body via standard 1\/4\" NPT, requiring no special tooling beyond what most overlanders already carry. Keeping a replacement gauge on hand means a cracked lens or damaged needle doesn't sideline the whole inflator.\u003c\/p\u003e\n\n\u003ch2\u003eMade in California\u003c\/h2\u003e\n\u003cp\u003ePower Tank manufactures its shock inflator tools and their serviceable components at its California facility. The GAU-0800L is produced to the same standard as the original gauge supplied with the SIG-5800 and SIG-5850, so fit and calibration match without adjustment.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e800 psi range:\u003c\/strong\u003e matches the pressure scale of the SIG-5800 and SIG-5850 shock inflator tools\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSilicone-filled:\u003c\/strong\u003e performs reliably in cold weather where glycerin-filled gauges lose accuracy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2.5 in. diameter face:\u003c\/strong\u003e same size as the original gauge for direct replacement\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1\/4\" NPT threads:\u003c\/strong\u003e standard thread for straightforward installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in California:\u003c\/strong\u003e manufactured at Power Tank's own facility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eGAU-0800L\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePressure Range\u003c\/td\u003e\n      \u003ctd\u003e800 psi\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eGauge Type\u003c\/td\u003e\n      \u003ctd\u003eAnalog, silicone-filled\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFace Diameter\u003c\/td\u003e\n      \u003ctd\u003e2.5 in.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThread Size\u003c\/td\u003e\n      \u003ctd\u003e1\/4\" NPT\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Tools\u003c\/td\u003e\n      \u003ctd\u003ePower Tank SIG-5800, SIG-5850\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOrigin\u003c\/td\u003e\n      \u003ctd\u003eMade in California, USA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe GAU-0800L suits owners of the Power Tank SIG-5800 or SIG-5850 nitrogen shock inflator tool who need to replace a damaged gauge or want to swap a glycerin-filled gauge for a silicone-filled one that holds up better in cold conditions.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis gauge is specified for the SIG-5800 and SIG-5850 only and is not listed as compatible with other Power Tank tools or third-party shock inflators. It does not include the inflator tool body, hose, or any other SIG-series components.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich shock inflator tools does this gauge fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank GAU-0800L replacement gauge is specified for the Power Tank SIG-5800 and SIG-5850 nitrogen shock inflator tools. Power Tank does not list it as compatible with other tools in its lineup or with third-party inflators.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhy does silicone fill matter compared to glycerin?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eSilicone fluid maintains consistent viscosity at lower temperatures, so the needle in the GAU-0800L analog gauge responds accurately even in cold conditions. Glycerin-filled gauges can thicken in the cold, causing the needle to move sluggishly or read inaccurately during shock inflation.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat thread size does this gauge use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank GAU-0800L uses a 1\/4\" NPT thread, which is the standard connection on the SIG-5800 and SIG-5850 tool bodies. No adapters are required when replacing the original gauge on those tools.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this gauge come with any other components?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe GAU-0800L is sold as a single replacement gauge only. The SIG-5800 and SIG-5850 shock inflator tool bodies, hoses, and other components are not included and are sold separately.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621739040838,"sku":"GAU-0800L","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/GAU-0800LHERO_f08acafb-c9c0-4131-94cf-657b6d245980.jpg?v=1791937979"},{"product_id":"power-tank-wide-ladder-cross-bar-mount-for-co2-tanks","title":"Power Tank Wide Ladder Cross-Bar Mount for CO2 Tanks","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Wide Ladder Cross-Bar Mount (SKU BKT-1060) is a ladder-mounted bracket platform designed to hold Power Tank CO2 systems and compatible accessories on vehicle ladders up to 17 inches in outer width, up to 2 inches in handrail depth, and up to 2.125 inches in handrail width. It accepts any Power Tank bracket and third-party brackets with 1\/4-inch or 3\/8-inch mount holes, and ships with all required hardware and blue thread lock included.\u003c\/p\u003e\n\n\u003ch2\u003eWide Ladder Compatibility Where Narrow Mounts Fall Short\u003c\/h2\u003e\n\u003cp\u003eMany ladder cross-bar mounts are sized for standard-width rungs and leave owners of wider vehicle ladders without a clean mounting solution. The Wide Ladder Cross-Bar Mount accommodates ladders up to 17 inches in outer width, covering a broader range of aftermarket and OEM ladder configurations. That means a secure, permanent mounting position for a Power Tank CO2 system without fabricating a custom bracket or relocating the tank to a less accessible spot.\u003c\/p\u003e\n\n\u003ch2\u003eUniversal Bracket Interface\u003c\/h2\u003e\n\u003cp\u003eThe cross-bar accepts any Power Tank bracket and any third-party bracket drilled for 1\/4-inch or 3\/8-inch mount holes. That interface matters because a CO2 system often travels between vehicles or gets paired with different accessories over time. A mount that works with the existing hole pattern means the bracket stays useful even when the tank configuration changes, without buying a new platform each time.\u003c\/p\u003e\n\n\u003ch2\u003eReady to Install Out of the Box\u003c\/h2\u003e\n\u003cp\u003eThe Wide Ladder Cross-Bar Mount ships with all mounting hardware and blue thread lock included. Blue thread lock on the fasteners reduces the risk of vibration-induced loosening on rough terrain, which is a real concern for any tank or bracket exposed to off-road use. No sourcing additional hardware or making a separate hardware-store run before the install.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide ladder fit:\u003c\/strong\u003e accommodates ladders up to 17 inches in outer width\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandrail clearance:\u003c\/strong\u003e fits handrails up to 2 inches deep and 2.125 inches wide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal mount holes:\u003c\/strong\u003e accepts brackets with 1\/4-inch or 3\/8-inch mount holes, including all Power Tank brackets\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardware included:\u003c\/strong\u003e ships with all fasteners and blue thread lock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaximum Ladder Outer Width\u003c\/td\u003e\n      \u003ctd\u003e17 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaximum Handrail Depth\u003c\/td\u003e\n      \u003ctd\u003e2 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaximum Handrail Width\u003c\/td\u003e\n      \u003ctd\u003e2.125 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Mount Hole Sizes\u003c\/td\u003e\n      \u003ctd\u003e1\/4 in, 3\/8 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHardware Included\u003c\/td\u003e\n      \u003ctd\u003eYes, with blue thread lock\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eBKT-1060\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Wide Ladder Cross-Bar Mount suits overlanders and off-road vehicle owners who need to mount a Power Tank CO2 system or compatible bracket on a vehicle ladder with an outer width up to 17 inches, a handrail depth up to 2 inches, and a handrail width up to 2.125 inches. It works with any bracket drilled for 1\/4-inch or 3\/8-inch mount holes.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis mount does not fit ladders exceeding 17 inches in outer width, handrails deeper than 2 inches, or handrails wider than 2.125 inches. The mount is a platform only. A Power Tank CO2 system, regulator, hose, and bracket are not included and are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat ladder dimensions does this mount fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank Wide Ladder Cross-Bar Mount fits vehicle ladders with an outer width up to 17 inches, a handrail depth up to 2 inches, and a handrail width up to 2.125 inches. Ladders that exceed any of these three dimensions are not compatible with this mount.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhich brackets will attach to this cross-bar?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Wide Ladder Cross-Bar Mount accepts any Power Tank bracket and any third-party bracket drilled for 1\/4-inch or 3\/8-inch mount holes. The CO2 tank, regulator, and hose are not included and are sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this mount include hardware?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Power Tank Wide Ladder Cross-Bar Mount ships with all required mounting hardware and blue thread lock. No additional fasteners are needed for the ladder installation itself.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs this the same as the standard Ladder Cross-Bar Mount?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Wide version is sized for ladders up to 17 inches in outer width, which is broader than the standard mount's range. If the vehicle ladder falls within the standard mount's dimensions, either may work; if the ladder is on the wider end, the Wide version is the correct choice.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621739565126,"sku":"BKT-1060","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/BKT-1060_IMAGE_2.jpg?v=1791938018"}],"url":"https:\/\/terrainvault.com\/collections\/power-tank.oembed","provider":"TerrainVault","version":"1.0","type":"link"}