{"title":"Pedco","description":null,"products":[{"product_id":"pedco-ultrapod-3-compact-tripod-with-phone-mount","title":"Pedco UltraPod 3 Compact Tripod with Phone Mount","description":"\u003cp class=\"product-lead\"\u003eThe Pedco UltraPod 3 is an ultralight, multi-use tripod rated for up to 10 lbs, designed to hold cell phones, POV sports cameras, camcorders, binoculars, spotting scopes, compact DSLRs with shorter lenses, and any device with a standard 1\/4 inch-20 female thread. A spring-loaded phone mount and a removable hook-and-loop cinch strap are included in the box, making the UltraPod 3 ready to use on a flat surface or lashed to a post, tree limb, or railing without additional accessories.\u003c\/p\u003e\n\n\u003ch2\u003e10-Pound Capacity in a 4.7-Ounce Package\u003c\/h2\u003e\n\u003cp\u003eThe UltraPod 3's ball head assembly uses upgraded materials that push its safe load rating to 10 lbs, a meaningful ceiling for a tripod that weighs less than five ounces and folds to 7.25 inches. That capacity covers not just phones but binoculars and spotting scopes, which matter on a trail or at a campsite where glassing terrain is part of the day. The tripod does not require a separate head or adapter; the ball-and-socket mount is built in and adjusts to any angle without removing the device from the mount.\u003c\/p\u003e\n\n\u003ch2\u003eTwo Ways to Set Up, One Strap Included\u003c\/h2\u003e\n\u003cp\u003eFold-out legs with non-slip rubber feet let the UltraPod 3 stand on any reasonably flat surface: a tailgate, a rock, a picnic table. When a flat surface isn't available, the included 13-inch hook-and-loop cinch strap wraps around a post, railing, or tree limb and holds the tripod in place. The strap is removable, so it doesn't add bulk when it isn't needed. Both setups use the same ball head, so repositioning the camera or phone takes seconds without tools.\u003c\/p\u003e\n\n\u003ch2\u003eUniversal Phone Mount Included\u003c\/h2\u003e\n\u003cp\u003eThe included spring-loaded phone mount fits phones up to 3.5 inches wide and offers two mounting positions. It attaches to the tripod's standard 1\/4 inch-20 thread, the same thread used by the rest of the UltraPod 3's compatible devices, so it can be swapped out for a camera or scope without a separate adapter. The mount is sized to fit large phones including the iPhone 8 Plus.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e10 lb safe load rating:\u003c\/strong\u003e upgraded ball head materials support cameras, scopes, and binoculars\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded phone mount:\u003c\/strong\u003e spring-loaded, universal fit up to 3.5 inch phone width, two mounting positions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBall-and-socket head:\u003c\/strong\u003e 360-degree pan, plus or minus 90-degree tilt, plus or minus 20-degree angular adjustment\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFold-out legs:\u003c\/strong\u003e non-slip rubber feet for stable surface placement\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHook-and-loop cinch strap:\u003c\/strong\u003e 13-inch removable strap for attachment to posts, limbs, and railings\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard thread:\u003c\/strong\u003e 1\/4 inch-20 female thread compatibility across all supported devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eP-UP3\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFolded Dimensions\u003c\/td\u003e\n      \u003ctd\u003e7.25 in x 2 in x 2.25 in (18.4 cm x 5.1 cm x 5.7 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Weight\u003c\/td\u003e\n      \u003ctd\u003e4.7 oz\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMax Safe Load\u003c\/td\u003e\n      \u003ctd\u003e10 lbs\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePan Adjustment\u003c\/td\u003e\n      \u003ctd\u003e360 degrees\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTilt Adjustment\u003c\/td\u003e\n      \u003ctd\u003e+\/- 90 degrees\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAngular Adjustment\u003c\/td\u003e\n      \u003ctd\u003e+\/- 20 degrees\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStrap Length\u003c\/td\u003e\n      \u003ctd\u003e13 in (33 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePhone Mount Width Capacity\u003c\/td\u003e\n      \u003ctd\u003eUp to 3.5 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThread Standard\u003c\/td\u003e\n      \u003ctd\u003e1\/4 inch-20 female\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWarranty\u003c\/td\u003e\n      \u003ctd\u003eLimited 1-Year\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe UltraPod 3 suits overlanders, campers, and outdoor photographers who need a compact, lightweight tripod for phones, POV cameras, spotting scopes, binoculars, or compact DSLRs with shorter lenses, particularly where surface space is limited and strap-mounting to a railing, post, or tree is useful.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe UltraPod 3 is not designed for full-size DSLR cameras with long or heavy lenses, or for any device exceeding its 10 lb safe load rating. It does not fit devices without a 1\/4 inch-20 female thread unless a separate adapter is used. The phone mount accommodates phones up to 3.5 inches wide; wider devices will not fit the included mount.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat devices does the UltraPod 3 support?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Pedco UltraPod 3 supports any device with a standard 1\/4 inch-20 female thread, including cell phones (via the included mount), POV sports cameras, camcorders, binoculars, spotting scopes, and compact DSLR cameras with shorter lenses, up to a maximum safe load of 10 lbs.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the phone mount come included, or is it sold separately?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe spring-loaded phone mount is included with the Pedco UltraPod 3 at no additional cost. It fits phones up to 3.5 inches wide, accommodates large phones including the iPhone 8 Plus, and offers two mounting positions on the tripod's standard 1\/4 inch-20 thread.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the UltraPod 3 attach to something other than a flat surface?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Pedco UltraPod 3 includes a removable 13-inch hook-and-loop cinch strap that wraps around posts, tree limbs, railings, and similar solid objects. The strap detaches completely when not needed, so it does not add bulk during surface-based use.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow does the ball head adjust, and do I need tools?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe UltraPod 3's ball-and-socket head adjusts to 360 degrees of pan, plus or minus 90 degrees of tilt, and plus or minus 20 degrees of angular movement. All adjustments are tool-free and can be made without removing the camera or phone from the mount.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the warranty on the UltraPod 3?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Pedco UltraPod 3 carries a Limited 1-Year warranty.\u003c\/p\u003e","brand":"Pedco","offers":[{"title":"Default Title","offer_id":50545656266822,"sku":"P-UP3","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/p-up3_pedcoup3_7.jpg?v=1790905161"},{"product_id":"pedco-ultrapod-3-mini-travel-tripod-with-phone-mount","title":"Pedco Ultrapod 3 Mini Travel Tripod with Phone Mount","description":"\u003cp class=\"product-lead\"\u003eThe Pedco Ultrapod 3 Mini is a compact travel tripod weighing 2.3 oz that supports cameras, action cams, and smartphones up to 3.5 inches wide, with a 5 lb safe load capacity. Fold-out legs with non-slip TPE feet, a ball-and-socket mount, and an included hook-and-loop strap let it stand on flat surfaces or lash to a tree, railing, or pack strap wherever a shot calls for a steady platform.\u003c\/p\u003e\n\n\u003ch2\u003eSteady Support Without the Bulk\u003c\/h2\u003e\n\u003cp\u003eAt 2.3 oz and 4.5 x 1.75 x 1.2 inches collapsed, the Ultrapod 3 Mini fits in a shirt pocket or clips to a pack without adding meaningful weight to a day kit. For overlanders and car campers who already manage a full gear list, a tripod that disappears into a pocket is one that actually comes along and gets used, rather than staying in the truck.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to Hold More Than It Looks Like It Should\u003c\/h2\u003e\n\u003cp\u003eThe reinforced nylon and TPE body is rated to a 5 lb safe load, which covers most mirrorless cameras with a kit lens, compact action cam housings, and smartphones in heavy cases. The construction is 40% stronger than the original Ultrapod 1, so the small footprint does not come at the cost of confidence in the mount.\u003c\/p\u003e\n\n\u003ch2\u003eTwo Ways to Mount, One Strap Does Both\u003c\/h2\u003e\n\u003cp\u003eThe standard 1\/4-20 camera screw is compatible with the threaded socket on virtually every camera and action cam on the market, and the included universal phone mount handles smartphones up to 3.5 inches wide. The integrated hook-and-loop strap means the tripod is not limited to flat surfaces: wrap it around a branch, a side mirror, a tent pole, or a railing, and the ball-and-socket head lets you dial in the angle from there.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e5 lb Safe Load Capacity:\u003c\/strong\u003e supports cameras, action cams, and smartphones in a wide range of housings and cases\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e40% Stronger Than Ultrapod 1:\u003c\/strong\u003e reinforced nylon and TPE body construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard 1\/4-20 Camera Screw:\u003c\/strong\u003e compatible with threaded mounts on virtually all cameras and action cams\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal Phone Mount Included:\u003c\/strong\u003e fits smartphones up to 3.5 inches wide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHook-and-Loop Strap:\u003c\/strong\u003e secures to trees, railings, tent poles, and other irregular surfaces\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNon-Slip TPE Feet:\u003c\/strong\u003e fold-out legs stay put on smooth or uneven flat surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBody Material\u003c\/td\u003e\n      \u003ctd\u003eReinforced Nylon and TPE\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e2.3 oz (65 g)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions (Expanded)\u003c\/td\u003e\n      \u003ctd\u003e5.1 x 5.1 x 4.5 in (12.9 x 12.9 x 11.4 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions (Collapsed)\u003c\/td\u003e\n      \u003ctd\u003e4.5 x 1.75 x 1.2 in (11.4 x 4.4 x 3 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSafe Load Capacity\u003c\/td\u003e\n      \u003ctd\u003e5 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCamera Mount\u003c\/td\u003e\n      \u003ctd\u003eStandard 1\/4-20 screw\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePhone Mount\u003c\/td\u003e\n      \u003ctd\u003eUniversal, fits up to 3.5 in phone width\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWarranty\u003c\/td\u003e\n      \u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Ultrapod 3 Mini suits overlanders, car campers, hikers, and travelers who want a lightweight, packable tripod for cameras, action cams, or smartphones, particularly when a stable platform is needed on surfaces or structures where a full-size tripod cannot stand.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Ultrapod 3 Mini does not replace a full-size tripod for heavy camera bodies or long telephoto lenses. The phone mount is limited to devices up to 3.5 inches wide; wider phones and large tablet-style devices will not fit.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat cameras and devices does the Ultrapod 3 Mini support?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Ultrapod 3 Mini supports any camera or action cam with a standard 1\/4-20 threaded mount, up to the 5 lb safe load capacity. The included universal phone mount accommodates smartphones up to 3.5 inches wide. Devices heavier than 5 lbs or phones wider than 3.5 inches are outside the rated range.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the Ultrapod 3 Mini attach to something other than a flat surface?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Ultrapod 3 Mini includes a hook-and-loop strap that wraps around trees, railings, tent poles, pack straps, and similar structures, so it is not limited to flat ground or tabletop use. The ball-and-socket head adjusts the angle after the strap is secured.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow small does the Ultrapod 3 Mini pack down?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eCollapsed, the Ultrapod 3 Mini measures 4.5 x 1.75 x 1.2 inches and weighs 2.3 oz (65 g), which is small enough to fit in a shirt pocket, a jacket pocket, or a small pouch on a pack.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs the phone mount included, or sold separately?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe universal phone mount is included with the Ultrapod 3 Mini. No separate purchase is needed to use it with a smartphone up to 3.5 inches wide.\u003c\/p\u003e","brand":"Pedco","offers":[{"title":"Default Title","offer_id":50545672814662,"sku":"P-UP3-MINI","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/PEDCO_UltrapodMini_Hero.jpg?v=1790905646"},{"product_id":"pedco-ultrapod-3-compact-travel-tripod","title":"Pedco UltraPod 3 Compact Travel Tripod","description":"\u003cp class=\"product-lead\"\u003eThe Pedco UltraPod 3 is a compact, ultralight tripod weighing 4.7 oz that supports cameras, binoculars, spotting scopes, and any device with a 1\/4 inch-20 female thread up to a 10 lb safe load. This OEM version does not include a phone mount or retail packaging.\u003c\/p\u003e\n\n\u003ch2\u003e10 Pounds of Capacity in a 4.7 oz Package\u003c\/h2\u003e\n\u003cp\u003eThe UltraPod 3 ball head assembly uses stronger materials to reach a 10 lb max safe load, a 30% increase over the previous generation. For overlanders and backcountry travelers, that margin matters: a compact DSLR with a short lens, a full-size spotting scope, or a pair of heavy binoculars all stay within spec, so there's no need to carry a heavier tripod just to handle the occasional larger optic.\u003c\/p\u003e\n\n\u003ch2\u003eTwo Ways to Set Up, One Tripod\u003c\/h2\u003e\n\u003cp\u003eThe UltraPod 3 stands on fold-out legs with non-slip rubber feet on any flat surface. When a flat surface isn't available, the removable 13-inch hook and loop cinch strap wraps around a post, tree limb, railing, or roll bar to hold the tripod in place. Switching between the two modes takes seconds and requires no tools.\u003c\/p\u003e\n\n\u003ch2\u003eBall Head That Stays Where You Put It\u003c\/h2\u003e\n\u003cp\u003eThe ball and socket head adjusts through 360 degrees of pan, plus or minus 90 degrees of tilt, and plus or minus 20 degrees of angular correction. Repositioning does not require removing the mounted device: loosen, reposition, lock. For wildlife spotting or trail documentation where the subject moves and time is short, that matters more than it might seem on a spec sheet.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e10 lb max safe load:\u003c\/strong\u003e 30% stronger ball head assembly than the prior generation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull-range ball head:\u003c\/strong\u003e 360° pan, ±90° tilt, ±20° angular adjustment without removing the device\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFold-out legs:\u003c\/strong\u003e non-slip rubber feet for stable placement on flat surfaces\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable cinch strap:\u003c\/strong\u003e 13-inch hook and loop fastener for attachment to posts, limbs, and railings\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal 1\/4 inch-20 thread:\u003c\/strong\u003e compatible with cameras, camcorders, binoculars, spotting scopes, and POV cameras\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eDesigned in Seattle\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct Weight\u003c\/td\u003e\n      \u003ctd\u003e4.7 oz\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFolded Dimensions\u003c\/td\u003e\n      \u003ctd\u003e7.25\" x 2\" x 2.25\" (18.4 cm x 5.1 cm x 5.7 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMax Safe Load\u003c\/td\u003e\n      \u003ctd\u003e10 lbs\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePan Adjustment\u003c\/td\u003e\n      \u003ctd\u003e360°\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTilt Adjustment\u003c\/td\u003e\n      \u003ctd\u003e±90°\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAngular Adjustment\u003c\/td\u003e\n      \u003ctd\u003e±20°\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStrap Length\u003c\/td\u003e\n      \u003ctd\u003e13\" (33 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThread Mount\u003c\/td\u003e\n      \u003ctd\u003e1\/4 inch-20 female\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOEM Notes\u003c\/td\u003e\n      \u003ctd\u003eNo phone mount included; no retail packaging (ships in plastic bag)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe UltraPod 3 suits overlanders, hikers, and outdoor photographers who need a lightweight, packable tripod for cameras, spotting scopes, binoculars, POV cameras, or camcorders with a standard 1\/4 inch-20 thread mount. The cinch strap makes it especially useful in the field where a flat surface isn't available.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe UltraPod 3 does not include a phone mount; buyers who need smartphone mounting will require a separate adapter. It is not rated for loads above 10 lbs, so large telephoto lenses or heavy medium-format systems may exceed its capacity. This OEM version ships without retail packaging.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the UltraPod 3 include a phone mount?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. This OEM version of the Pedco UltraPod 3 does not include a phone mount. The tripod accepts any device with a standard 1\/4 inch-20 female thread; a separate phone adapter would be needed to mount a smartphone.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat kinds of devices can the UltraPod 3 hold?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Pedco UltraPod 3 is compatible with cell phones (with a separate adapter), POV sports cameras, camcorders, binoculars, spotting scopes, medium-format cameras, and compact DSLR cameras with shorter lenses: any device with a 1\/4 inch-20 female thread and a total weight at or below 10 lbs.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the UltraPod 3 attach to something other than a flat surface?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Pedco UltraPod 3 includes a removable 13-inch hook and loop cinch strap that wraps around posts, tree limbs, railings, and similar solid objects, holding the tripod securely when fold-out leg placement isn't practical.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow much does the UltraPod 3 weigh, and how small does it pack?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Pedco UltraPod 3 weighs 4.7 oz and folds down to 7.25\" x 2\" x 2.25\" (18.4 cm x 5.1 cm x 5.7 cm), making it small enough to slip into a jacket pocket or a small pouch on a pack or kit bag.\u003c\/p\u003e","brand":"Pedco","offers":[{"title":"Default Title","offer_id":50545680318534,"sku":"P-UP3-OEM","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/p-up3-oem_pedcoup3_5.jpg?v=1790905903"},{"product_id":"pedco-ultraclamp-4-0-camera-clamp-mount","title":"Pedco UltraClamp 4.0 Camera Clamp Mount","description":"\u003cp class=\"product-lead\"\u003eThe Pedco UltraClamp 4.0 is a camera mounting clamp made in the USA from an aluminum body and glass-reinforced nylon clamp head, designed to secure any device with a 1\/4-20 tripod socket to round or flat objects up to 4 inches (10 cm) thick (including rolled-down car windows, bicycle handlebars, and picnic tables). It weighs 9.9 oz and fits a single variant with no vehicle-specific fitment.\u003c\/p\u003e\n\n\u003ch2\u003eGrip Where a Tripod Cannot Go\u003c\/h2\u003e\n\u003cp\u003eA standard tripod needs flat, open ground. The UltraClamp 4.0 opens up surfaces a tripod cannot touch: car window glass, fence rails, table edges, and handlebars, turning any rigid object up to 4 inches thick into a stable camera platform. For overlanders and campers who want to capture trail footage or wildlife without carrying a full tripod setup, that range of attachment points means fewer missed shots and less gear to pack.\u003c\/p\u003e\n\n\u003ch2\u003eFull Positioning Freedom\u003c\/h2\u003e\n\u003cp\u003eThe UltraClamp 4.0 uses the same ball-and-socket mount found on the UltraPod II, letting the camera rotate and tilt to any angle once the clamp is set. The UltraMount can be positioned on the top or side of the clamp body. Mounting from the side keeps the camera closer to the surface and out of the way of doors, handlebars, or other obstructions when clearance is tight. Together, these two adjustments mean the camera angle is not dictated by where the clamp happens to land.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to Hold Without Marking\u003c\/h2\u003e\n\u003cp\u003eThe clamp body and screw are aluminum; the clamp head and knobs are injection-molded, glass-reinforced nylon thermoplastic resin. That combination keeps weight under 10 oz while giving the clamp enough rigidity to support most cameras, spotting scopes, and camcorders without flex under load. The nylon clamp head is less likely to scratch or mar the surface it grips than a bare metal jaw would be.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal 1\/4-20 socket compatibility:\u003c\/strong\u003e fits any camera, camcorder, or spotting scope with a standard tripod thread.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTop or side UltraMount position:\u003c\/strong\u003e the UltraMount attaches on either face of the clamp for maximum placement flexibility.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBall-and-socket head:\u003c\/strong\u003e the same mount used on the UltraPod II positions the device at any angle.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAluminum body and screw:\u003c\/strong\u003e durable construction kept under 10 oz total weight.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGlass-reinforced nylon clamp head and knobs:\u003c\/strong\u003e injection-molded thermoplastic resin resists flex and surface marring.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eMade in the USA.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e6\" x 1½\" x 6⅝\" (15 cm x 4 cm x 17 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e9.9 oz (280 g)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eClamp range\u003c\/td\u003e\n      \u003ctd\u003e0\"–4\" (0–10 cm) round or flat objects\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThread compatibility\u003c\/td\u003e\n      \u003ctd\u003e1\/4-20 tripod socket\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBody material\u003c\/td\u003e\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eClamp head and knobs\u003c\/td\u003e\n      \u003ctd\u003eInjection-molded glass-reinforced nylon thermoplastic resin\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOrigin\u003c\/td\u003e\n      \u003ctd\u003eMade in the USA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe UltraClamp 4.0 suits overlanders, cyclists, campers, and wildlife observers who need to mount a camera, spotting scope, or camcorder to a surface a tripod cannot reach (a vehicle window, handlebar, table edge, or similar object up to 4 inches thick) and want full ball-and-socket angle adjustment once it is set.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe UltraClamp 4.0 does not fit objects thicker than 4 inches (10 cm). It is not compatible with devices that lack a standard 1\/4-20 tripod socket thread.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat surfaces can the UltraClamp 4.0 grip?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe UltraClamp 4.0 attaches to any round or flat object between 0 and 4 inches (0–10 cm) thick. Typical mounting surfaces include a rolled-down car window, bicycle handlebar, picnic table edge, fence rail, or similar rigid structure. Objects thicker than 4 inches fall outside the clamp's range.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill the UltraClamp 4.0 work with my camera?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe UltraClamp 4.0 fits any device with a standard 1\/4-20 tripod socket thread, which covers the vast majority of cameras, camcorders, and spotting scopes. If a device does not have a 1\/4-20 socket, it is not compatible with this clamp.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the mount position be changed after the clamp is attached?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The UltraMount on the UltraClamp 4.0 can be repositioned to the top or side of the clamp body before or after attachment, giving additional clearance options when space around the mounting surface is limited. The ball-and-socket head then allows the camera to be angled in any direction independently of the clamp position.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow much does the UltraClamp 4.0 weigh, and how large is it?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe UltraClamp 4.0 weighs 9.9 oz (280 g) and measures 6\" x 1½\" x 6⅝\" (15 cm x 4 cm x 17 cm). That size and weight make it practical to carry in a camera bag or pack alongside other gear without adding significant bulk.\u003c\/p\u003e","brand":"Pedco","offers":[{"title":"Default Title","offer_id":50545708761158,"sku":"P-UCA40","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/p-uca40_3.jpg?v=1790906344"},{"product_id":"pedco-ultraclamp-camera-and-optics-clamp-mount","title":"Pedco UltraClamp Camera and Optics Clamp Mount","description":"\u003cp class=\"product-lead\"\u003eThe Pedco UltraClamp is a compact clamp mount for cameras, spotting scopes, and camcorders with a standard 1\/4-20 tripod socket, rated to a maximum safe load of 6 lbs. The aluminum clamp body and glass-reinforced nylon head grip round or flat objects up to 1.5 inches (3.8 cm) thick (car window frames, bicycle handlebars, picnic tables, rollbars, and similar surfaces), and a ball-and-socket joint lets the attached device rotate and tilt to any angle.\u003c\/p\u003e\n\n\u003ch2\u003eSolid Hold Without a Tripod\u003c\/h2\u003e\n\u003cp\u003eThe UltraClamp's aluminum clamp body and screw provide a rigid, rattle-free grip on the mounting surface, while the injection-molded, glass-reinforced nylon thermoplastic resin head and knobs resist flex under load. A 6 lb maximum safe load covers most compact cameras, spotting scopes, and camcorders, so there is no need to carry a full tripod when a window ledge, handlebar, or table edge is already available.\u003c\/p\u003e\n\n\u003ch2\u003eBall-and-Socket Flexibility\u003c\/h2\u003e\n\u003cp\u003eThe same ball-and-socket mount used on the UltraPod II lets the camera or optic swing to any framing angle after the clamp is secured. Locking the ball takes one knob adjustment, so repositioning between shots is fast and does not require loosening the clamp from the surface.\u003c\/p\u003e\n\n\u003ch2\u003eWide Range of Mounting Surfaces\u003c\/h2\u003e\n\u003cp\u003eThe UltraClamp accepts round or flat objects up to 1.5 inches (3.8 cm) thick, which covers rolled-down car window glass, standard bicycle handlebars, rollbar tubing, and most table edges. Any device with a 1\/4-20 tripod socket threads directly onto the mount with no adapter required.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal 1\/4-20 thread:\u003c\/strong\u003e fits any camera, spotting scope, or camcorder with a standard tripod socket\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6 lb maximum safe load:\u003c\/strong\u003e supports most compact cameras and optics\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAluminum clamp body and screw:\u003c\/strong\u003e durable, rigid grip on the mounting surface\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGlass-reinforced nylon clamp head and knobs:\u003c\/strong\u003e injection-molded thermoplastic resin resists flex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBall-and-socket joint:\u003c\/strong\u003e positions the device at any angle after clamping\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.5 inch (3.8 cm) max clamp opening:\u003c\/strong\u003e fits round or flat objects within that range\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e3\" x 1 5\/8\" x 5 1\/2\" (8 cm x 4 cm x 14 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e5.5 oz (157 g)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaximum Safe Load\u003c\/td\u003e\n      \u003ctd\u003e6 lbs\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMax Clamp Opening\u003c\/td\u003e\n      \u003ctd\u003e1.5\" (3.8 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eClamp Body Material\u003c\/td\u003e\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eClamp Head and Knob Material\u003c\/td\u003e\n      \u003ctd\u003eInjection-molded glass-reinforced nylon thermoplastic resin\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThread\u003c\/td\u003e\n      \u003ctd\u003e1\/4-20\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eP-UCA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe UltraClamp suits photographers, hunters, and overlanders who want a quick, packable way to mount a camera or spotting scope to a car window frame, bicycle handlebar, rollbar, table edge, or any round or flat surface up to 1.5 inches thick without setting up a full tripod. It works with any device carrying a standard 1\/4-20 tripod socket and handles loads up to 6 lbs.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe UltraClamp does not fit mounting surfaces thicker than 1.5 inches (3.8 cm) and is not designed for devices that exceed the 6 lb maximum safe load. It does not include an additional tripod head beyond the built-in ball-and-socket joint, and it does not accept devices without a 1\/4-20 tripod socket without a separate adapter.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat size thread does the UltraClamp use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Pedco UltraClamp uses a standard 1\/4-20 thread, the same thread found on the vast majority of cameras, spotting scopes, and camcorders. Any device with a 1\/4-20 tripod socket mounts directly without an adapter.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow thick can the surface be that the UltraClamp grips?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe UltraClamp clamps onto round or flat objects up to 1.5 inches (3.8 cm) thick. Surfaces beyond that dimension fall outside the clamp's rated opening and cannot be secured.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the maximum safe load?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Pedco UltraClamp has a stated maximum safe load of 6 lbs, which covers most compact cameras, spotting scopes, and camcorders. Heavier devices should not be mounted on the UltraClamp.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the camera angle be adjusted after clamping?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe UltraClamp includes a ball-and-socket joint that lets the mounted device rotate and tilt to any angle. Tightening one knob locks the ball in position.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the UltraClamp made of?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe UltraClamp's clamp body and screw are aluminum. The clamp head and adjustment knobs are injection-molded, glass-reinforced nylon thermoplastic resin. The unit weighs 5.5 oz (157 g).\u003c\/p\u003e","brand":"Pedco","offers":[{"title":"Default Title","offer_id":50545717936198,"sku":"P-UCA","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/p-uca_p-uca_1.jpg?v=1790906432"},{"product_id":"pedco-ultraclamp-2-5-camera-clamp-mount","title":"Pedco UltraClamp 2.5 Camera Clamp Mount","description":"\u003cp class=\"product-lead\"\u003eThe Pedco UltraClamp 2.5 is a versatile clamp mount that secures any camera, spotting scope, or camcorder with a standard 1\/4-20 tripod socket to round or flat objects from 1 inch to 2.5 inches (2.5 cm to 6 cm) thick. The aluminum clamp body and fiberglass-reinforced nylon head hold the device firmly while the integrated ball-and-socket joint allows full repositioning without loosening the clamp itself. One size fits the full range of supported diameters with no adapters required.\u003c\/p\u003e\n\n\u003ch2\u003eSolid Hold Across a Wide Range of Surfaces\u003c\/h2\u003e\n\u003cp\u003eThe UltraClamp 2.5 grips round and flat objects from 1 inch to 2.5 inches thick, which covers bicycle handlebars, picnic table edges, roll bars, and similar structures a photographer or videographer is likely to encounter in the field. That range matters because it means one clamp handles most real-world mounting situations without carrying a second adapter or swapping hardware mid-shoot.\u003c\/p\u003e\n\u003cp\u003eThe clamp body is machined aluminum and the screw is aluminum as well, so the clamping force is applied through metal rather than plastic. The clamp head and knobs are injection-molded fiberglass-reinforced nylon thermoplastic resin, a material chosen for its resistance to cracking under repeated tightening cycles.\u003c\/p\u003e\n\n\u003ch2\u003eBall-and-Socket Flexibility Without a Separate Head\u003c\/h2\u003e\n\u003cp\u003eThe UltraClamp 2.5 uses the same ball-and-socket mount found on the UltraPod II, which means the camera can be angled in any direction after the clamp is already secured to the surface. Adjusting framing does not require loosening the clamp, repositioning the whole assembly, and re-tightening. For video work on a moving platform or wildlife photography where the subject position changes, that independence between clamping and aiming saves real time.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal 1\/4-20 thread:\u003c\/strong\u003e fits any camera, spotting scope, or camcorder with a standard tripod socket\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAluminum clamp body and screw:\u003c\/strong\u003e durable metal construction for consistent clamping force\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFiberglass-reinforced nylon head and knobs:\u003c\/strong\u003e injection-molded thermoplastic resin resists cracking under repeated use\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBall-and-socket mount:\u003c\/strong\u003e positions the device at any angle independently of the clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1 inch to 2.5 inch grip range:\u003c\/strong\u003e attaches to round or flat objects from 1\" to 2.5\" (2.5 cm to 6 cm) thick\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eClamp Range\u003c\/td\u003e\n      \u003ctd\u003e1\" to 2.5\" (2.5 cm to 6 cm) round or flat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThread\u003c\/td\u003e\n      \u003ctd\u003e1\/4-20 tripod socket\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eClamp Body and Screw Material\u003c\/td\u003e\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eClamp Head and Knobs Material\u003c\/td\u003e\n      \u003ctd\u003eInjection-molded fiberglass-reinforced nylon thermoplastic resin\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e4\" x 1 5\/8\" x 6 1\/8\" (10 cm x 4 cm x 16 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e6.5 oz. (184 g)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eP-UCA25\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe UltraClamp 2.5 suits photographers, videographers, and outdoor enthusiasts who need to mount a camera or optic to a handlebar, rail, table edge, roll bar, or similar structure between 1 inch and 2.5 inches in diameter or thickness. It works with any device that has a standard 1\/4-20 tripod socket, including cameras, spotting scopes, and camcorders.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe UltraClamp 2.5 does not fit objects thinner than 1 inch or thicker than 2.5 inches. It is not compatible with devices that lack a 1\/4-20 tripod socket. No maximum supported weight is published for this clamp.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat size objects does the UltraClamp 2.5 fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe UltraClamp 2.5 clamps onto round or flat objects from 1 inch to 2.5 inches (2.5 cm to 6 cm) thick. That range covers most bicycle handlebars, table edges, and roll bars without any adapter. Objects outside that range, either thinner than 1 inch or thicker than 2.5 inches, are not compatible.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill the UltraClamp 2.5 work with my camera?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe UltraClamp 2.5 is compatible with any camera, camcorder, or spotting scope that has a standard 1\/4-20 tripod socket. That thread is the industry-standard size found on the bottom of most consumer and prosumer cameras. Devices without a 1\/4-20 socket are not compatible.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan I adjust the camera angle after clamping the UltraClamp 2.5 to a surface?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The UltraClamp 2.5 uses a ball-and-socket mount that lets you reposition the camera at any angle without loosening the clamp from the surface. The ball joint and the clamp are adjusted independently, so framing can be changed after the clamp is already secured.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the UltraClamp 2.5 made of?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe UltraClamp 2.5 clamp body and screw are aluminum. The clamp head and adjustment knobs are injection-molded fiberglass-reinforced nylon thermoplastic resin. The combination gives the clamp a metal clamping mechanism with knobs designed to resist cracking under repeated tightening.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow heavy is the UltraClamp 2.5?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe UltraClamp 2.5 weighs 6.5 ounces (184 grams) and measures 4 inches by 1 5\/8 inches by 6 1\/8 inches (10 cm x 4 cm x 16 cm). That size and weight make it practical to carry in a camera bag or pack alongside other field gear.\u003c\/p\u003e","brand":"Pedco","offers":[{"title":"Default Title","offer_id":50545784553542,"sku":"P-UCA25","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/p-uca25_1.jpg?v=1790908004"},{"product_id":"pedco-ultraclamp-360-swiveling-camera-and-device-mount","title":"Pedco UltraClamp 360 Swiveling Camera and Device Mount","description":"\u003cp class=\"product-lead\"\u003eThe Pedco UltraClamp 360 is a swiveling clamp mount for cameras, spotting scopes, and camcorders, built around a full 360-degree panning head and a 1\/4-20 tripod socket that fits most imaging devices. The clamp body is aluminum; the head and knobs are injection-molded, glass-reinforced nylon thermoplastic resin. It attaches to round or flat objects up to 1.5 inches (3.8 cm) thick, has a maximum safe load of 6 lbs (2.7 kg), and weighs 5.5 oz (157 g).\u003c\/p\u003e\n\n\u003ch2\u003eA Stable Platform Wherever You Stop\u003c\/h2\u003e\n\u003cp\u003eMounting a camera to a car window, bicycle handlebar, or picnic table normally means improvising with gear that was designed for something else. The UltraClamp 360 clamps directly to those surfaces (rolled-down window glass, a round handlebar, a flat table edge) without requiring a traditional tripod. That means you can set up a stable shot in seconds at a trailhead, a race course, or a wildlife overlook without carrying a full tripod or hunting for level ground.\u003c\/p\u003e\n\n\u003ch2\u003e360-Degree Panning Without Repositioning the Clamp\u003c\/h2\u003e\n\u003cp\u003eThe swiveling head rotates a full 360 degrees and positions the attached device at any angle, so you can follow a moving subject (a bike race, a bird in flight, a vehicle on a trail) without unclamping and repositioning. The clamp stays fixed to the surface while the head does the work, keeping the shot smooth and the setup time short.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to Hold What You Bring\u003c\/h2\u003e\n\u003cp\u003eThe aluminum clamp body and screw handle a maximum safe load of 6 lbs (2.7 kg), which covers most compact cameras, mirrorless bodies, spotting scopes, and camcorders. The glass-reinforced nylon thermoplastic resin head and knobs resist flex under load. At 5.5 oz (157 g), the UltraClamp 360 adds little weight to a pack or a vehicle kit.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull 360-degree panning:\u003c\/strong\u003e swiveling head rotates continuously and positions the device at any angle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal 1\/4-20 tripod socket:\u003c\/strong\u003e fits cameras, spotting scopes, camcorders, and other devices with a standard tripod thread\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide clamp range:\u003c\/strong\u003e attaches to round or flat objects from 0 to 1.5 inches (3.8 cm) thick\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAluminum clamp body and screw:\u003c\/strong\u003e durable construction rated to a 6 lb (2.7 kg) maximum safe load\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGlass-reinforced nylon head and knobs:\u003c\/strong\u003e injection-molded thermoplastic resin resists flex and wear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact and light:\u003c\/strong\u003e 3 x 1 5\/8 x 5 1\/2 inches (8 x 4 x 14 cm), 5.5 oz (157 g)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eClamp body material\u003c\/td\u003e\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHead and knob material\u003c\/td\u003e\n      \u003ctd\u003eInjection-molded, glass-reinforced nylon thermoplastic resin\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e3 x 1 5\/8 x 5 1\/2 in (8 x 4 x 14 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e5.5 oz (157 g)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaximum safe load\u003c\/td\u003e\n      \u003ctd\u003e6 lbs (2.7 kg)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eClamp range\u003c\/td\u003e\n      \u003ctd\u003e0 to 1.5 in (0 to 3.8 cm) thick, round or flat objects\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThread compatibility\u003c\/td\u003e\n      \u003ctd\u003e1\/4-20 tripod socket\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePanning range\u003c\/td\u003e\n      \u003ctd\u003e360 degrees\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe UltraClamp 360 suits photographers, videographers, and outdoor enthusiasts who need a quick, stable camera or optics mount on surfaces a tripod cannot reach: car windows, handlebars, table edges, or similar round and flat objects up to 1.5 inches thick. Any device with a standard 1\/4-20 tripod socket and a weight at or under 6 lbs is compatible.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe UltraClamp 360 does not fit objects thicker than 1.5 inches (3.8 cm) and is not designed for devices without a 1\/4-20 tripod socket. It is not rated for loads above 6 lbs (2.7 kg).\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat surfaces can the UltraClamp 360 attach to?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe UltraClamp 360 clamps to round or flat objects from 0 to 1.5 inches (3.8 cm) thick. Typical mounting surfaces include a rolled-down car window, a bicycle handlebar, and a picnic table edge. Objects thicker than 1.5 inches fall outside the clamp's rated range.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat devices will it hold?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe UltraClamp 360 is compatible with any device that has a standard 1\/4-20 tripod socket, including compact cameras, mirrorless cameras, camcorders, and spotting scopes. The maximum safe load is 6 lbs (2.7 kg); devices heavier than that should not be used with this mount.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow does the panning head work?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe UltraClamp 360's swiveling head rotates a full 360 degrees and can be positioned at any angle, letting you follow a moving subject or reframe a shot without unclamping the mount from the surface. The clamp body stays fixed while the head adjusts.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow much does the UltraClamp 360 weigh, and how large is it?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe UltraClamp 360 weighs 5.5 oz (157 g) and measures 3 x 1 5\/8 x 5 1\/2 inches (8 x 4 x 14 cm), making it compact enough to carry in a camera bag, pack, or vehicle kit without adding meaningful bulk.\u003c\/p\u003e","brand":"Pedco","offers":[{"title":"Default Title","offer_id":50697583263814,"sku":"P-UCA360","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/original-P-UCA360_NA_P_1-sq.jpg?v=1792635128"}],"url":"https:\/\/terrainvault.com\/collections\/pedco.oembed","provider":"TerrainVault","version":"1.0","type":"link"}